AutoCad :: Cursor Disappears After Selection
Jul 23, 2009
I have several drawings that some times, after selecting several objects to move, and pressing space-bar to end selection, the cursor disappears. If I click for a base-point the cursor comes back but it is not where I need it for accurate placement.
I have developed a work around - I cancel command after blind pick, restart command, type P to select previous, then space-bar, then I can place accurately with cursor visible for both placement picks.
Autocad 2009, XP
View 9 Replies
ADVERTISEMENT
Mar 13, 2013
This has been occurring numerous time more than it should. While in a drawing mid command, panning, typing anything pretty much my cad freezes. The rest of my computer is fine everything works properly but CAD is frozen and when i bring my pointer into the program it disappears. I can even open cad up again and the old CAD will stay open. It shows the drawings i have open on the tab bar and i can’t close out of them. I have a computer that’s more than capable to work properly.
View 1 Replies
View Related
Oct 3, 2012
At no specific time when using ACAD 2012 MEP the cursor disappears. cross hairs and all. the only way to get them back is to close ACAD and open it back up.
View 4 Replies
View Related
May 3, 2012
All of a sudden my cursor will become invisible. This happens only with AutoCAD. and if I switch between drawing windows it will appear on another drawing file. I have to close the drawing and open it again and then the cursor will be back only to disappear again. The cursor is visible if I move it back to the ribbon or bottom controls. It seems to happen only when it becomes the cross-hair cursor. I can still make selection windows and right click.
Mouse is working fine with all other programs and drivers are up-to-date.
View 9 Replies
View Related
Apr 27, 2013
When I use various sliders to adjust values of modifiers, I will sometimes push the mouse up or down until the cursor wraps around the screen, sometimes multiple times, depending on how much the values are being adjusted.
After adjusting the value, when the cursor has gone off the view of the monitor, it will not return for a minute or longer.
View 2 Replies
View Related
Jan 29, 2013
CS6 Photoshop. Why does brush cursor disappear under 20 pixels?
View 2 Replies
View Related
Sep 12, 2012
I have a problem in Photoshop CS5 (v. 12.0.2) after ugrading my Mac system to Mountain Lion 10.8.1. I use a mouse (not wireless, also tried changing mouse).
When I work with a picture using the brush tool and move the cursor to a palette or menu, the layers palette for example, the cursor disappers. Sometimes you can see that the palettes gets "marked" when you move the mouse around (I mean the "buttons" that changes when you move the cursor over them).
But the cursor is gone and I can't see where to click. If I just click around and eventually hit the right spot, a layer for example, the cursor usually comes back. But the problem happens again as soon as I move the cursor from my picture to a palette or menu.
I don't use that many different tools in Photoshop, usually just the brush tool. But the same thing happens with the doodge tool (or any other tool I think)}.
View 3 Replies
View Related
Dec 3, 2008
I have a frustrating problem in CS3 that when writing a block of text, either with text tool or area text tool, that the cursor disappears. I need to see its new position after using the space bar or tab: ready to input the next piece of text.
It seems to be flashing some of the time if I click into the middle of the text block, but disappears where I want to continue it at the bottom of the text block?
View 4 Replies
View Related
Feb 7, 2014
When I am working on an image, for some reason SOMETIMES, the cursor vanishes and all I will see is different elements momentarily highlighting but not enough to do anything in LR. pressing ESC gets me out of the module and somehow I have to exit the program...restart to get it back to normal again...
View 13 Replies
View Related
Sep 16, 2013
When I am working on an image, for some reason SOMETIMES, the cursor vanishes and all I will see is different elements momentarily highlighting but not enough to do anything in LR. pressing ESC gets me out of the module and somehow I have to exit the program...restart to get it back to normal again...
View 1 Replies
View Related
Jul 29, 2013
Upon selecting anything in 90% of any drawings the crosshairs disappear and CAD2014 freezes for 2sec.
It's a Dell Presicion T1600, Xeon 3.4Ghz, 16GB RAM, Quadro2000 with a 120GB SSD as the primary running CAD2014 premium.
It started recently.
This happens even if I toggle HW acceleration. We draft mainly in model view with the 2D Wireframe style.
View 6 Replies
View Related
Mar 10, 2011
I've got multiple objects selected, and I can set "Use Selection Center" to rotate all around center, but NOT if the animation button is on! "Use Selection Center" disappears! How can I animate these three object on center (or single pivot point)?
View 5 Replies
View Related
Jan 29, 2014
I'm using Gimp 2.8.10 on a Windows 8.1 machine, but I had this issue with earlier Gimp versions on a Win 7 machine as well. From time to time, usually after working in Gimp for a while, the marching ants around selections disappear. The most recent event happened after using quick mask. QM still shows my selection, but pressing Shift + Q to turn it off left me with no indication of the mask outline. The problem is not unique to my current machine, as I upgraded in Dec. 2013, but had the issue with an older one as well. In order to fix the problem, I save my work then restart Gimp and all is well again, for a while.
View 3 Replies
View Related
Mar 28, 2014
Maybe it's a problem with Mavericks or with my Mac Mini late 2012. But when editign text with anchored images and other text frames, all the contect disappears. When I click outside the box with the selection tool, everything works ok again. It seems to me a visual glitch, because the content does not really disappears, only in does not allow you to "visually" edit it. If I use a visualization setting of low quality (image boxes shown as gray boxes) everything works as usual. Any clue?
View 3 Replies
View Related
Jul 20, 2012
My cursor suddenly does not change with the selection of tools when working on photos. Once I roll over the picture the arrow is lost and becomes a strange 3 small things, so can't do any work accurately. Still using PS 7 in Win 7. This was not a problem previously. Already uninstalled and reinstalled and problem is still there.
View 8 Replies
View Related
Nov 27, 2012
Vista version 6 (Build 6002: Service pack 2)CorelDraw Suit version 16.1.0.843Photopaint
I have just upgraded from X4 to X6 and found that when using the paint tool, the cursor disappears at the end of the action, and appears again when the cursor is moved again.This happens when the user interface setting is set to 'Shape cursor for brush tools".
More of a concern for me is when the Eyedropper tool is set to 'Select sample', (the one I always use), no rubber rectangle is drawn to show the area that is being sampled.That is, it is supposed to draw a dynamic rectangle in a similar way that the rectangular mask tool selects an area with a rectangle changing size with movement of the cursor.The eyedropper samples the correct pixels, but does not draw the enclosing rectangle.I have tried running it in all comparability modes except for 256 color and 640 x 480 resolution, which aren't options for me.
X4 didn't exhibit these problems so I can't understand how it can't be a bug, especially since the rectangular mask tool draws the rubber-banding rectangle without a problem. At this point would be preferring to be using X4.
View 3 Replies
View Related
Dec 14, 2012
My cursor appears and disappears while in GIMP as I move the cursor over the canvas. I can make the cursor appear but only if there is no movement of the cursor. It makes no difference which tool I select, the size of the canvas, or the level of zoom.
Please note that this only occurs in Gimp, and none of my other applications. It started when I upgraded from openSUSE 12.1 to 12.2. I'm assuming that it has something to do with my input device configuration, but I could be totally wrong.
I have a total of 3 input devices - Core Pointer, Logitech USB-PS/2 Optical Mouse, and Virtual Core XTEST Pointer. Both the Optical Mouse and XTEST Pointer are DISABLED. Core Pointer is the only one enabled. Enabling Optical Mouse and XTEST Pointer give me other problems in Gimp and need to remain disabled.
For the Core Pointer, Mode is set to SCREEN, a message says that 'The axis X has no curve', and the following Axis Settings:
X 1
Y 2
Pressure none
xtilt none
ytilt none
wheel none
In Gimp Preferences->Input Controllers, there are three active controllers - Mouse Buttons, Main Mouse Wheel, and Main Keyboard.
OS: Linux 3.4.11-2.16-desktop i686
System: openSUSE 12.2 (i586)
KDE: 4.8.5 (4.8.5) "release 2"
Display Info:
Vendor: Intel Corporation
Model: G33
2D driver: intel
3D driver: Unknown Gallium (9.0.1)
View 3 Replies
View Related
Feb 27, 2014
In Xcode, we have to define cursor as:
resource 'CURS' (16001) {
$"00 00 00 00"
$"18 00 3C 00"
$"1E 00 0F 00"
$"07 80 03 C8"
$"01 E8 00 FC"
[Code]...
In Windows we use .cur file, simpler.
I want to convert .cur file to the mac format above, how?
View 1 Replies
View Related
Jul 12, 2011
When I select a hatch or polyline or any object with grips for that matter, and hold down shift to select multiple grips on the object or objects and then press my middle mouse button to pan or scroll it to zoom, the grips that I have selected de-select, meaning I have to set up the view so that all the grips I want to move are visible before selecting them.
This is only happening on some drawings (although it is most of them) and only when I use 2012 not 2011. Which system variable it is that has gone screwy that I need to reset? or is it something else?
View 9 Replies
View Related
Mar 28, 2013
I have a flexible sub-assembly in my top assembly. Sometiems I'm trying to demonstrate to others how a mechanism in the sub-assembly works using this flexibility feature. It works great, but when I move just one little part of a flexible assembly, Inventor displays the wire-mesh of the entire flexible assembly, because technically the entire assembly is selected, even though I'm only moving one part. It clutters up the screen very badly, detracting from what I'm trying to show.
Is there a way to prevent Inventor from displaying the selection lines? Either only when I'm moving a part in a flexible assembly (which would be great), or to just turn them off completely when I'm presenting like this? I know I can turn off pre-select, but that doesn't work, because once I start moving a part in the flexible assembly, the assembly is "selected" and the wire-mesh displays.
View 3 Replies
View Related
Sep 11, 2013
When creating a selection Command using the PromptXXXOptions and PromptXXXResult. The entities are selected on the current view, but once the selection ends the entities return to an unselected state.
Is it possible to leave them in selection mode.
I want to this, because it will be better to use Editor.SelectImplied() instead of saving the last selection object Ids.
View 2 Replies
View Related
Nov 15, 2013
I've created a lisp that draws the boltholes of a pipe flanges, using the correct number of holes, at the correct diameter at the correct bolt-hole diameter and then rotates. Everything works seamlessly, when i do just one flange. But I've discovered that fewuently there will be mulitple times when a user will have to perform the command.
So the idea I had was to do the following:
Select all circles with (setq CirclesFirst (ssget "X" (list (cons 0 "CIRCLE"))))
Go through the code to create the new circles.
Select all circles with (setq Circles (ssget "X" (list (cons 0 "CIRCLE"))))
Remove selection set "CirclesFirst" from "Circles".
But what for some reason (command "_.select" Circles "R" CirclesFirst "") does not work.
View 9 Replies
View Related
Oct 28, 2013
While working in AutoCAD, Sometimes everything just disappears.
I'll be working. I move a block, or draw a line, copy something, etc.. And after I execute the command, and finish. What I just moved,copied, drawn, etc, doesn't show up. I do a _regen, and EVERYTHING in the drawing disappears. If I zoon extents, everything is gone. I can undo commands, but nothing shows back up. If I save the drawing, and reopen the file. Everything shows back up. Is there a setting I need to click or something? It's getting really annoying. It happened 6 times in the hour.
My company recently upgraded to 2013 (from 2010), and we've had nothing but problems. It's one thing after the other with this version.
View 8 Replies
View Related
May 13, 2011
I have created a custom ribbon in vb.net. And it works now.
However. To make it work i had to do a workaround because IExtensionApplication.Initialize is apparently run before the Ribbon is created in AutoCAD. To make it work i created a time that runs until the ribbon is created.
But i think this is implementation is flawed since i had to do the workaround, but also because the ribbon disappearse when the ribbon is updated. Say when the user changes something in the CUI menu.
Partial Public Class BenteMenu Implements IExtensionApplication Dim WithEvents WSARibPanel As RibbonPanel Dim WithEvents ReformerRibPanel As RibbonPanel Dim WithEvents CNVPanel As RibbonPanel Dim WithEvents ModelPanel As
[Code]....
View 6 Replies
View Related
Nov 20, 2011
When panning/zooming in mid-command, say while drawing a polyline and I need to pan from one side to the other to complete the line, my navigation bar disappears. Very annoying. If I change layouts, then come back, the navigation bar reappears. When I click the User Interface, under the View ribbon, the navigation bar is checked. Unchecking and rechecking causes the navigation bar to reappear. Running Autocad LT 2011.
View 3 Replies
View Related
Jun 10, 2011
I just upgraded to AutoCAD LT 2012. I am having a problem with background jpg's disappearing when you pan. It comes back once you stop but it really, really annoying. I have to trace drawings off of jpg's and I have to do a lot of panning. It didn't use to do this in AutoCAD 2010. Ohh I am doing this in Model space. Is there a new setting or something that I don't know about.
View 9 Replies
View Related
Jan 19, 2012
I have a georeferenced drawing with aerial photos and linework that I have Xref'd in a recent survey drawing. I checked that the coordinate systems match and the xref shows that it is loaded and the layers are listed as on and thawed.
However, the xref is not visible.
I tried a new blank drawing using the Map 3D template, same coordinate system. Same thing happens. However, this time, I noticed that the xref is visible when zoomed out. When I zoom in, it disappears. Screen shot attached.
View 6 Replies
View Related
Mar 5, 2013
I have a drawing xrefing another drawing which has the ecw attached to it - if I change the UCS the ecw disappears.
So the image only shows when the ucs is set to WUCS - I should also note that just the image disappears I can still see the image frame.
View 6 Replies
View Related
Aug 27, 2012
When using Autocad 2013, the minimize, maximize, and close buttons on the right side of the title bar frequently disappears. I can make it reappear by selecting the drawing name under the window tab.
View 1 Replies
View Related
Jul 8, 2011
I'm trying to explode a 3d block that I created from a manufacturer's horizontal mullion detail. Whenever I do that, it disappears. I tried setting it to layer 0, still disappears. I made sure all the layers were turned on and thawed. Whats weird is that I can explode the vertial mullion block and it doesn't disappear. I tried matching the vertical mullion properties to the horiz, still no luck.
View 3 Replies
View Related
Jun 19, 2012
I've tried both draging an image into Autocad and importing it in as a block. When I try to rotates the image it either rotates around a point (but doesn't actually rotate itself) or rotates and disappears only leaving a white outline. How can I properly rotate an image?
View 3 Replies
View Related
