I'm trying to explode a 3d block that I created from a manufacturer's horizontal mullion detail. Whenever I do that, it disappears. I tried setting it to layer 0, still disappears. I made sure all the layers were turned on and thawed. Whats weird is that I can explode the vertial mullion block and it doesn't disappear. I tried matching the vertical mullion properties to the horiz, still no luck.
View 3 RepliesWhen defining a block it is possible to choose wether the block can be exploded or not. Is there a way of undoing this. I can edit the block in full version with refedit but in LT there is no way of editing this block. I can see advantages of this setting but I imagine someone accidentilly unpicking this box and creating unexplodable blocks without noticing.
View 9 Replies View RelatedI need to explode this block modifications. How to explode this.
View 1 Replies View RelatedFor some reason the line type scale is way out to lunch on one of the lines in a block i use, so i was wondering if you can change that LTS without exploding the block, or if i can change the LTS for the layer that specific line is on without exploding the block
View 4 Replies View RelatedI create schematics of lighting control systems for my job, the controllers on my schematic have multiple outputs which I need to modify so they're relevant to the job.
At present I have all my blocks in a tool palette and just click and drop to add them to my schematic.
How can I tailor the text of a block without exploding it? Is this even possible?
I have multiple dynamic blocks that I would like to add descriptions to. If I have a block in a tool palette, I can add a description by right clicking and selecting "Properties." But I would like to add a description that shows up in the Design Center as well.
Is there a way to do this without redefining the block? Exploding makes me lose all of my dynamic properties, and I'd hate to have to recreate them.
I'm using LT 2008, by the way, so I don't have ref edit or any of that other cool stuff.
Can you add Attributes to a exsiting block without ,exploding it ,and remaking it?
I have made a dynamic window block and forgot to add the attribute annotation I wanted.
Tried to edit the block and add it, but when I save it and reopen the block it does not show.the attribute.
I have a strange problem with one of our library blocks.
For panel schedules and light fixture schedules, we have DWG block files, and we insert them into our drawings and explode them for editing.
The light fixture schedule loses all of its font attributes when we do this. It looks fine when you insert the block, but once you explode the block all the font information is lost. Interestingly, if you insert the block and go into the block editor, the block editor doesn't show the fonts correctly even though the un-exploded block does show the fonts correctly.
An important detail in all of this is that the panel schedules are just drawings (lines, text, hatches, etc.). The light fixture schedule is a table.
I'll attach some pictures showing what I'm talking about and the DWG block file.
Here at the company I work for, we have different drawing templates for certain clients. The templates share quite a bit of information with only a few differences. I combined them into one dynamic block with different visibility states for each template. But when we get ready to use a particular template, the block will need to be exploded to use all the information available.
My question is what happens to the objects not on the current visibility state when exploded? It seems to just disappear. Does the exploding essentially delete all objects not visible?
We have a large AutoCAD file received from a survey company consisting of one large block that I want to explode and edit. When I attempt to explode it, a portion of it disappears.
This is the fifth version of the file that we have received. The previous versions did not have that portion at all, so we had to keep sending back for it.
What's been tried:
1. Turned on/unfroze all layers and zoom extents
- No change
2. Tried both Burst and Explode
- No change
3. Tried to copy/paste into a new drawing.
- "Copy to Clipboard Failed"
4. Inserted drawing as a block into a new drawing.
- The disappearing portion did not seem to be inserted along with the rest of the drawing
5. Attempted to edit the block.
- "This block contains proxy objects and cannot be edited in the Block Editor"
AutoCAD Version:
AutoCAD Map3D 2012
Just recently we upgraded from ACAD 2010 to 2011. Some users are still on XP and some are on Windows 7. Since we began making the jump to ACAD 2011, we have begun to notice more and more drawings popping up with blocks no longer visible that were there the day before. When you go to the block editor, the block definition is still there but all of the geometry has been blown away. The only entity that seems to be immune is an attribute. The only commonality among the various drawings this is happening too is that they are all being accessed from an XP machine. Some folks have had to spend hours restoring all the blocks that were lost and that in itself was a challenge because ACAD already saw the definition so it would continue to blow away the geometry. You could purge the block IF you could find a way to pick it and delete it.
View 5 Replies View RelatedI have created an attribute say 1 and made a circle and moved the attribute text next to the circle and now making a block including both text and circle but when the block is created the text disappears I have made sure to check the annotation on in both attribute and block creation. This is just happening in Autocad Map 3D 2012. Dont know why the text disappears but when i explode the block it is back.
View 9 Replies View RelatedHaving problems when copy/cut and paste. When pasting or inserting a block into a drawing the subject disappears.
View 4 Replies View RelatedI have a library of blocks that I built for our company to use. We recently upgraded from 2013 to 2014 and boy did it throw our library for a loop!
There is a check box (reflectivity) that leaves the materials black when the drawing shade mode is changed to Realistic (unless you go in and uncheck the reflectivity box) and while I have figured out how to alleviate that issue (by unchecking it on our tempate and saving it) I am still having a materials issue with our blocks.
I can open the block (and turn on Realistic mode) and all the pieces have their materials like they should. I then open a new drawing and insert the same block into the drawing .. one piece is sans material.
I cannot for the life of me figure out why it's there on one drawing but it gone when inserted. The new drawing has been purged and doens't contain anything it shouldn't.
[URL]
I recieved some CAD files from the architect and am not sure if theyre drawn in 3D or in revit. But everytime I go to explode the wall the doorways dissappear.
View 3 Replies View RelatedWhen I explode some work blocks they just disappear so I tried Burst but that did not work either .
View 5 Replies View RelatedMost of my design work requires me to xRef an existing title block to my paperspace and vport my drawing into my titleblock in paperspace. However, when I attach my titleblock using xRef into my paperspace, the scaling went totally out. Mostly my block comes out way bigger than it is suppose to. The problem is that I have set my designs and block to function in milimeters, so basically it should scale down to the same scale right?
And also, it's quite troublesome to keep going back to my titleblock dwg to edit/save and reload it back in my design. Is there anyway to explode the xRef titleblock? Every time I tried they keep saying its an external reference. Is there any way to go around this so I can edit it without going back and forth?
I have a Mechanical drawing with numerous Xrefs. I need to make changes to the Plumbing layers which is in O-Xref layer. I have tried to bind all Xrefs but cannot bind all of them. The piping is in the O-Xref layer. I cannot explode nor can I Xref-Edit anything in this layer. This is one of a number of drawings but this is the first one that I cannot explode or edit the layer and I have never run into this problem before.
Is there a way that the file can be locked up to prevent editing?
I've been searching for a routine to explode minserts but haven't found anything yet that works. However, this one did. It's a vlx.
Just copy it to your Support folder and load it ("AP"). Type "explodem" at the command line to run it. It first asks you to select the block; it then asks you if you want to explode? [No/Yes] Enter No. Yep, enter no. (I know; I tried Yes but it wouldn't work...might be just me though cuz I'm a bit dyslexic; either that or the programmer may be?)
I'm trying to export some AutoCAD files to SketchUp as DWGs... everything comes through fine, but the text (and certain other line-types) won't transfer over. I know that with AutoCAD 2008 using Express Tools, you could do this easily by exploding the text. How can I explode text using AutoCAD 2013, so that it will export as vectors in the DWG file?
View 6 Replies View RelatedIs there a way if I want my suface to be exploded for the components to be sent to different layers. For example if I make a building pad using the grading tool and create a surface for a design. I would like the minor and major contours to be on different layers. Same for my grading I would like my cut daylight boundary to go to a CG-Cut and fill daylight boundary to go to CG-Fill layers. Is there a way to do this? It would really streamline my work designing pads.
View 4 Replies View RelatedIf I modify a 3D solid and it is left with two seperate pieces it is still one solid piece, even though there are two parts. My question is: What if only need one of those two sides? If I explode the object and delete the one side I cannot change the remaining object into a 3D solid. It remains as surface object.
How can make an object into a 3D solid after exploding it? I belive there is a simple command like union or some other but I can't remember.
C3D 2010
Win7 Professional
16M RAM
I have to put out record drawings that contain C3D objects; Surfaces, Contour labels, Points and Point tables.
Many drawing Xrefs are nested. I tried the Civil batch converter with xref binding turned off and objects set to explode, and I get error messages, and the task is never completed. Is there a work around procedure to preserve the C3D information in each drawing? Can points be exploded and retain their apperance?
I have several featurelines that I wish to explode to be 3D Polylines (bad, I know, but it's a test for a way to get data across from our design group to our survey group).
Last week, in this drawing, I exploded a large selection of featurelines and they all became 3D polylines, preserving their elevation data. This week, I drew an additional set of featurelines in the same drawing. When I explode them once, they lose all elevation data, becoming lpolylines at z=0. Additionally, the Prospector shows me several errors: "breaklines not added to surface" or something similar. Which is an odd result for the explode command.
Why did this work once but not a second time?
Win 7E 64-bit, Intel i7, 12 GB C3D 2012
Insert a Raster Image or an OLE object (like a selection from a XLS worksheet).
Explode the Raster Image/OLE object.
=> the Raster Image/OLE dissapears and the frame remains (LINE objects).
I think that these types of entities should not allow exploding.
I have encounter some text exploding problem. As shown in attachment, I would like to know if there any possible way I can explode the text into polyline or single line and maintain it within the position and style?
View 8 Replies View RelatedI have a series of block references in a tool palette which I want to explode once inserted. Simple I think, just set the 'explode' property on the tool palette icon.
Wrong. What actually happens is that in my case where the block refernce is simply two blocks inserted on different layers, the tool palette will insert onto the layer specified, and then explode, moving each block from its original later, onto the layer the host block is inserted on.
For example:
BlockRef_A consists of two enties:
BockRef_1 on Layer1Blockref_2 on Layer2
Using the tool palette to insert and explode using the 'use current' for the destination layer, I get the following:
BlockRef_1 on 0
BlockRef_2 on 0
Both the destionation layer (Layer1 Layer2) already exist in the target drawing.
It looks to me like autocad is importing the block, exploding it, moving it to the required layer.
This doesn't happen to any other entities, if there's a block that consists of a mix of parts, only the block references within it get moved to the destination layer.
ACad, MEP, 3DS Max
Windows 7x64
X5482 @3.2Ghz 8Gb Ram
Quadro FX1700
I have a problem in autocad7, once i explode text to make it a vector the vectors go from being curves or radius to straight lines, how to make them into curves as we have to run a cutter path the only thing is they cant be splines.
View 1 Replies View RelatedI'm trying to create blocks which will be used in multiple drawings for Gridlines and detail marks.
These blocks are basically a circle with an attribute in the centre, and once created as a block are annotive as they will be displayed in multiple viewports.
I can create the block with attribute fine using the "block" command which then allows me to make the block annotive ( The "wblock" command dose not allow this )
However when I insert the block into a drawing I need to explode the block before I can edit the attribute ( even though I explode the block it's still actually blocked )
It's as if the block has been blocked twice?
Im drawing on autocad 2008, but im having some trouble with trying to explode an 'external reference' this external reference needs to be edited.
I opened a DWT renamed it and saved it as a DWG, then i used the INSERT/EXTERNAL REFRENCES/ATTACH DWG to bring in drawing. When i select the explode button i cant select the drawing i need to edit.
I just upgraded from Inventor 2012 LT to Inventor 2013, and I have to say that I love the new features !
I am now making my frames with the Frame Generator. We usually give to the trade persons a cut list (a drawing of each member of the frame with the dimensions) that goes with the frame. Until now someone is doing it using AutoCAD, but I was wondering if it was possible to make an explode view of a frame on a drawing and add the dimensions.