AutoCAD 2010 :: Exploding Minsert Blocks
Jun 5, 2013
I've been searching for a routine to explode minserts but haven't found anything yet that works. However, this one did. It's a vlx.
Just copy it to your Support folder and load it ("AP"). Type "explodem" at the command line to run it. It first asks you to select the block; it then asks you if you want to explode? [No/Yes] Enter No. Yep, enter no. (I know; I tried Yes but it wouldn't work...might be just me though cuz I'm a bit dyslexic; either that or the programmer may be?)
View 7 Replies
ADVERTISEMENT
Apr 24, 2013
I built a building foundation for a grading plan and I have another building that is the exact mirror of it. I have tried to mirror it. Didn't work. I created a block of the feature lines and inserted it with a -1 x value but I can't explode it. I tried the regular explode and xplode. Neither worked. I can use the the block to draw feature lines over but it just seems so much easier if I could figure out how to explode the block.
C3D 2013
View 2 Replies
View Related
Nov 3, 2011
I recieved some CAD files from the architect and am not sure if theyre drawn in 3D or in revit. But everytime I go to explode the wall the doorways dissappear.
View 3 Replies
View Related
Mar 16, 2012
When I explode some work blocks they just disappear so I tried Burst but that did not work either .
View 5 Replies
View Related
Nov 6, 2011
I'm trying to create blocks which will be used in multiple drawings for Gridlines and detail marks.
These blocks are basically a circle with an attribute in the centre, and once created as a block are annotive as they will be displayed in multiple viewports.
I can create the block with attribute fine using the "block" command which then allows me to make the block annotive ( The "wblock" command dose not allow this )
However when I insert the block into a drawing I need to explode the block before I can edit the attribute ( even though I explode the block it's still actually blocked )
It's as if the block has been blocked twice?
View 5 Replies
View Related
Aug 8, 2012
Here at the company I work for, we have different drawing templates for certain clients. The templates share quite a bit of information with only a few differences. I combined them into one dynamic block with different visibility states for each template. But when we get ready to use a particular template, the block will need to be exploded to use all the information available.
My question is what happens to the objects not on the current visibility state when exploded? It seems to just disappear. Does the exploding essentially delete all objects not visible?
View 1 Replies
View Related
Aug 8, 2013
Pulling apart a drawing that someone else did, each block contains a set of text that I need, along with the polylines for editing, however, when I explode these blocks to edit the polyllines - all of the text inside the blocks changes to generic terms like "AUX".
I assume that these blocks go to a lookup table of some sort to find their names, but it's not something I'm familiar with - is there a way to get the text to "hardcode" or something? Just force it to stay as it is before I explode the block?
View 3 Replies
View Related
Apr 10, 2012
Basically the question is if it is possible to explode families similar to blocks in AutoCAD.
Here is an example: A Family made for placement in the model has 2 nested families. Once placement is done is it possible to eliminate the initial family so only the nested families remain? All the parametric values can go away that’s fine and the nested families are also shared if that matters.
Since I come from AutoCAD and started with Revit v2012 it is basically like a block within a block which you could just explode so much until only lines are left.
View 2 Replies
View Related
Mar 27, 2012
I have a strange problem with one of our library blocks.
For panel schedules and light fixture schedules, we have DWG block files, and we insert them into our drawings and explode them for editing.
The light fixture schedule loses all of its font attributes when we do this. It looks fine when you insert the block, but once you explode the block all the font information is lost. Interestingly, if you insert the block and go into the block editor, the block editor doesn't show the fonts correctly even though the un-exploded block does show the fonts correctly.
An important detail in all of this is that the panel schedules are just drawings (lines, text, hatches, etc.). The light fixture schedule is a table.
I'll attach some pictures showing what I'm talking about and the DWG block file.
View 3 Replies
View Related
Feb 27, 2011
I've been given a drawing to edit and the creator has long but left the company. I need to explode the block in order to carry out the necessary editing however I cannot explode the block as it is an MInsert Block. I've searched the forums but I haven't found anything relevant. I've gone through the list of blocks present in the drawing to check that the "allow exploding block" tab is checked however there is no block for the whole drawing.
Is there anyway to explode the block and if so how would this be done? These are the blocks properties:
Select objects:
BLOCK REFERENCE Layer: "0"
Space: Model space
Handle = 57a34
Block Name: "*U243"
at point, X=-4237700.3549 Y=-1887128.2335 Z= 0.0000
X scale factor: 1.0000
Y scale factor: 1.0000
rotation angle: 0
Z scale factor: 1.0000
Scale uniformly: No
Allow exploding: Yes
And yes I can realize that allow exploding is set to yes but exploding block to attributes does not work.
View 9 Replies
View Related
Sep 7, 2013
I have a dwg with as many as 150 of the same block inserted. What command will give me a count of those blocks?
View 3 Replies
View Related
Mar 20, 2012
I'm working on creating some blocks for our office. Basically it is a simple block with a few lines that remain and then a couple attributes you can click on and change. I have added the attribute and all is working well.
My only issue is I would like to make the text in the attributes to be bold. For some reason I can't see to do this. Is it not possible.
Basically I want to try and get some of the attributes to stand out more than others. I tried changing the color and the lineweight of the attibute (which worked the color is different) but when it prints it doesn't change at all.
View 2 Replies
View Related
Aug 15, 2012
How do you add blocks from another file? Also can a block span multiple layers? How do you change the layer of a block?
View 1 Replies
View Related
Jan 26, 2012
I have received a drawing from another company that has blocks. When I try to rotate the blocks to an angle through the properties dialog box or by entering an angle at the command line, I am not able to. The value is always set to "E". I can rotate it graphically by placing points on the screen, just not through a key in. It seems like there is a lock on it.
View 3 Replies
View Related
Apr 11, 2012
I have some unnecessary blocks in the drawing with $ sign . How can i purge them.
View 2 Replies
View Related
Apr 13, 2012
Is there a quick/easy way to know if a DWG contains nested blocks?
View 6 Replies
View Related
Mar 1, 2013
Many of the blocks my company uses were created with the linework within the block on Layer 0, and set to ByLayer.
When I insert it into a drawing, I put the block on a layer other than 0, and use that layer to control the color & linetype.
If I Xref a drawing, and want to turn off or freeze a layer I use the Freeze and Off buttons in the layers section of the ribbon (I'm working in 2012). This way, I don't have to figure out what layer an object is on to turn it off.
Here's the problem: When I try to freeze or turn off a layer by clicking on a block, it doesn't do anything to the layer that the block is on. It tries to effect layer 0. Even if I use the list command to find out what layer an object is on, it says it's on 0.
I found this article that seems to explain how to use layer 0 in blocks: [URL] ....
It seems my company is doing things exactly as that writer recommends. But it still seems incredibly faulty.
What is the best way to design and work with blocks? I always try to avoid using layer 0, but that would waste a lot of time trying to override the company standards.
View 4 Replies
View Related
Mar 26, 2013
I have inherited the task of maintining out companies tool palette for all standard blocks. In my efforts I have found a number is issues with the blocks and have made efforts to update the blocks, first using bedit and then by navigating to the palette directory folder where the .dwg files for the blocks are stored. Regardless of these files being changed the palette still inserts the block revision prior to my changes. I have even re-imported the template file to no avail.
Is there a way to have to palette reference the updated files or is there a better way to update these blocks so the palette recognizes the changes immediately?
View 9 Replies
View Related
Aug 2, 2012
I am using Autocad 2011 and created a dynamic block which turned out fine.
After making a copy of this dynamic block and doing some additions to this new block (added several flip parameters), I found that when I run my mouse over this new block it lags. I have attached the drawing which contains both the blocks. The one on top is the problematic block whereas the bottom one is the one I created first and made a copy of.
View 2 Replies
View Related
Mar 21, 2012
I'm looking for samples of the above. To be used in working with Sheet Set Manager tab-to automate Sheet Set organization and view placement.
View 3 Replies
View Related
Sep 11, 2012
I am trying to create a block that contains polylines. these polylines need to be able to have the width of them set individually.
What parameter do i need to assign so that this can happen?
View 4 Replies
View Related
Feb 4, 2013
I need to create a dynamic title block, so I can change the date on layout 1 and all the others change too.
View 5 Replies
View Related
Mar 29, 2012
I have several script commands that insert items such as title blocks (xrefs) and page boundaries (blocks). The base point and INSBASE for all files are set to 0,0,0. However the blocks will occassionally come in at different positions. In some cases I can repeat the command multiple times and each time the same block will inset at a different position in the same drawing even though the insert point is set to 0,0,0.
Autocad LT 2012
View 5 Replies
View Related
Feb 22, 2012
We've recently converted all our microstation drawings to autocad now that the company has decided to go with one cad program company wide. One of the issues we are having after getting the drawings back from the this co. converting them is the cells to blocks conversion inside the drawing. when we open a drawing and see a "Fuse" block for instance and if it a has multiple inserts, it named them:
Fuse
Fuse_1
Fuse_2 etc....
is there a lisp routine or some command that would replace the "Fuse_*" blocks with "Fuse"..I've been searching the forums and know about the express tool Replace Block but need to be able to automate somehow. I thought about trying to rename each of the "Fuse_*" but of course it won't let you rename to a block name that already exists.
View 1 Replies
View Related
Jul 7, 2012
I am doing electrical drawings with the architect giving me an exported DWG from Vectorworks. I have XREF the background drawing that when opened is about 6 blocks of the building background and 2 blocks of the electrical devices.
Here is the problem: The architect sent me an updated DWG that only has the electrical updates without any backgrounds. My thought was to purge all and then select all the items and then copy with basepoint. Then open the original architects XREF drawing. Select those two electrical block, erase them (or move them to the size a fixed distance). Then paste as block from the other file. Then move the block to the correct location, explode, done.
Big problem: I just tons of this error in the command line referencing different block group numbers being ignored:
Duplicate definition of block Group-1265-1 ignored.
Then the block that was pasted added a background that wasn't in the old drawing and many of the items in that block was either missing or still had the old symbols. Can't figure out how to update the background with confidence that it is really updated with new information and not keeping old.
If I open a new drawing and paste that block in, everything comes in perfectly
View 6 Replies
View Related
Apr 12, 2012
I have a large amount of P&ID drawings that have blocks with attributes. One of the blocks is missing an attribute field that I need so I recreated the block using the same name and added the missing attribute. When I reinsert the block and say "yes" to updating the block's definition within one of my P&ID drawings everything seems fine except when I try to edit the block to fill in that field.
The newly added attribute doesn't show up but when I right click one of these blocks and select Block Editor the new attribute field does shows up so the redefine did work I just can't use that attribute. Is this a bug in AutoCAD? How I can use this attribute?
View 2 Replies
View Related
Dec 27, 2013
I have a drawing that have blocks in them I cant find inserted. I cant purge them or the linetypes they have. How do I strip them out if I cant find them to explode them?
I have attached the file.
View 9 Replies
View Related
Feb 15, 2012
How do I create a new .dwg that has no layers, blocks, text styles and dim styles? 2013 Civil 3D
View 3 Replies
View Related
Aug 11, 2012
I need to make block with certain random elements in it which regenerate when the block is copied. In this case it's the rotation of the main part of a drawn tree, In which I want the trunk to stay the same but for the polyline that makes up the leafy part to rotate randomly.
View 2 Replies
View Related
Apr 30, 2012
I have been working for a new company who likes to use blocks extensively. My question is this, is it possible to quickly change the layer of the components of a block? That is, the lines, arcs, etc of the block. Or, is the only way to explode the block, change the layer and remake the block?
View 2 Replies
View Related
Jul 28, 2009
I am having a problem with a bunch of existing drawings. The drawings displayed fine with Autocad 2009 but with 2010 the blocks have huge rectangles drawn around them. (so big they extend off the title block) We have a few machines running older versions and the drawings display fine but any machine with 2010 all displays these boxes.
View 5 Replies
View Related
