AutoCad :: Exploding Work Blocks
Mar 16, 2012When I explode some work blocks they just disappear so I tried Burst but that did not work either .
View 5 Replies
ADVERTISEMENT
AutoCAD Dynamic Blocks :: Exploding Blocks With Negative Values?
Apr 24, 2013I built a building foundation for a grading plan and I have another building that is the exact mirror of it. I have tried to mirror it. Didn't work. I created a block of the feature lines and inserted it with a -1 x value but I can't explode it. I tried the regular explode and xplode. Neither worked. I can use the the block to draw feature lines over but it just seems so much easier if I could figure out how to explode the block.
C3D 2013
AutoCAD LT :: Exploding Walls That Are Blocks Or 3D?
Nov 3, 2011I recieved some CAD files from the architect and am not sure if theyre drawn in 3D or in revit. But everytime I go to explode the wall the doorways dissappear.
View 3 Replies View RelatedAutoCAD 2010 :: Exploding Minsert Blocks
Jun 5, 2013I've been searching for a routine to explode minserts but haven't found anything yet that works. However, this one did. It's a vlx.
Just copy it to your Support folder and load it ("AP"). Type "explodem" at the command line to run it. It first asks you to select the block; it then asks you if you want to explode? [No/Yes] Enter No. Yep, enter no. (I know; I tried Yes but it wouldn't work...might be just me though cuz I'm a bit dyslexic; either that or the programmer may be?)
AutoCad :: Annotative Blocks With Attributes Require Exploding?
Nov 6, 2011I'm trying to create blocks which will be used in multiple drawings for Gridlines and detail marks.
These blocks are basically a circle with an attribute in the centre, and once created as a block are annotive as they will be displayed in multiple viewports.
I can create the block with attribute fine using the "block" command which then allows me to make the block annotive ( The "wblock" command dose not allow this )
However when I insert the block into a drawing I need to explode the block before I can edit the attribute ( even though I explode the block it's still actually blocked )
It's as if the block has been blocked twice?
AutoCAD Dynamic Blocks :: Exploding Block With Visibility State
Aug 8, 2012Here at the company I work for, we have different drawing templates for certain clients. The templates share quite a bit of information with only a few differences. I combined them into one dynamic block with different visibility states for each template. But when we get ready to use a particular template, the block will need to be exploded to use all the information available.
My question is what happens to the objects not on the current visibility state when exploded? It seems to just disappear. Does the exploding essentially delete all objects not visible?
AutoCAD 2013 :: Exploding Blocks Causes The Contained Text To Change?
Aug 8, 2013Pulling apart a drawing that someone else did, each block contains a set of text that I need, along with the polylines for editing, however, when I explode these blocks to edit the polyllines - all of the text inside the blocks changes to generic terms like "AUX".
I assume that these blocks go to a lookup table of some sort to find their names, but it's not something I'm familiar with - is there a way to get the text to "hardcode" or something? Just force it to stay as it is before I explode the block?
Revit :: Exploding Families (nested) Similar To Blocks
Apr 10, 2012Basically the question is if it is possible to explode families similar to blocks in AutoCAD.
Here is an example: A Family made for placement in the model has 2 nested families. Once placement is done is it possible to eliminate the initial family so only the nested families remain? All the parametric values can go away that’s fine and the nested families are also shared if that matters.
Since I come from AutoCAD and started with Revit v2012 it is basically like a block within a block which you could just explode so much until only lines are left.
AutoCad :: Annotative Blocks Work In MEP But Don't Work In Vanilla
Sep 29, 2011All of my block updates work just fine when I use them in MEP 12, but we have a couple of drafters working in vanilla AutoCAD & for some reason the same commands/ blocks/ settings (same exact file even) that work in MEP do not work in regular ACAD.
Now they do "work" - the commands/ block insertion - but the annotative adjustment (i.e. 1/4" to 1/8" to etc) do not work until I select the block and add the desired scale to its annotative object scale list - why is this necessary? it isn't in MEP? The blocks work/ act properly annotatively once inserted and adjusted as mentioned above, but again, why? Why? Why is this necessary? All of the scale are in the block file as it resides in my block folder...?
AutoCAD LT :: Dynamic Blocks Won't Work In 2012
Nov 15, 2013I have an employee in our office with Autocad LT 2012, none of our dynamic blocks work on his machine? We have another machine with Autocad LT 2009 and the blocks work just fine? I can create dynamic blocks on the the machine, but when I close out of the block editor, none of the dynamic block grab-point show up. Is there a setting or somthing that needs to be turned on?
View 9 Replies View RelatedAutoCAD Dynamic Blocks :: Created In LT 2013 Don't Work In 2014?
Aug 9, 2013I created a library of Dynamic cabinets in AutoCAD LT 2013. I have tested them and used them in drawings. I just upgraded to 2104 and when I insert those same dynamic blocks into a drawing, the parameters do not show and i can not use the dynamic block as intended. when I click on it...tons ot grips show up and no parameters.
View 2 Replies View RelatedAutoCAD 2010 :: Quick Dimensioning A Number Of Blocks Doesn't Work?
Sep 3, 2013Quick dimensioning a number of blocks doesn't work. Is there a way to do this without exploding the blocks.
For example I have 10 blocks at various intervals and I want to pick up the centre line position of each block to show the dims between each block centre.
AutoCAD Dynamic Blocks :: How To Get Detail Callout Block To Work Properly
Sep 23, 2011I am having difficulty figuring out how to get my detail callout block to work properly. What I would like the block to do is scale/stretch the circle so a larger area can be detailed. Linked to this function I would like the attributed tag with line to stay on the outside of the circle once it's adjusted.
Another function I can't figure out is rotating the the text/line so it can be located anywhere around the circle. I currently have a vertical and horizontal flip but the attributed text doesn't remain on top of the line. So, I guess there are 2 things I can't get to work in that one.
File is attached.
AutoCAD Dynamic Blocks :: Attribute Justification FIT Option Doesn't Work Anymore?
Feb 16, 2012I thought for certain that justification FIT option worked for Attribute definitions.
View 5 Replies View RelatedAutoCAD Dynamic Blocks :: Block With Field Doesn't Work If Paste From Tool Pallet
Sep 27, 2012I have problem with attached block (also with other similar blocks with field). This block include field in block attribute. Works fine if I copy and paste this block. When I drag and drop from Tool Pallete field disappeary.
View 9 Replies View RelatedCorelDRAW X6 :: Arrow Keys Don't Work In Certain Text Blocks
Apr 17, 2013Problem file.cdr
Attached is an x6 file with 2 text blocks. The top block has the following instructions:
Using your text tool, select the text below.Try to move around in it using your arrow keys.Also, left justify the text. Then right justify the text.(Watch the icon when you do it)
The second text block is the problem. This second block of text is originally from an x3 file, then x5, now x6. Never had a problem with it before but today it didn't work, so I copy and pasted this text block to a new file, same problem. I don't have this problem in any other file.
EDIT: to be clear, I mean 'move around the cursor in the text' not move the text around the page.
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
AutoCAD LT :: Allow Exploding Block Setting?
Jun 6, 2005When defining a block it is possible to choose wether the block can be exploded or not. Is there a way of undoing this. I can edit the block in full version with refedit but in LT there is no way of editing this block. I can see advantages of this setting but I imagine someone accidentilly unpicking this box and creating unexplodable blocks without noticing.
View 9 Replies View RelatedAutoCad 3D :: 3D Block Disappears When Exploding?
Jul 8, 2011I'm trying to explode a 3d block that I created from a manufacturer's horizontal mullion detail. Whenever I do that, it disappears. I tried setting it to layer 0, still disappears. I made sure all the layers were turned on and thawed. Whats weird is that I can explode the vertial mullion block and it doesn't disappear. I tried matching the vertical mullion properties to the horiz, still no luck.
View 3 Replies View RelatedAutoCad 2D :: Scaling And Exploding Of XRef?
Oct 5, 2011Most of my design work requires me to xRef an existing title block to my paperspace and vport my drawing into my titleblock in paperspace. However, when I attach my titleblock using xRef into my paperspace, the scaling went totally out. Mostly my block comes out way bigger than it is suppose to. The problem is that I have set my designs and block to function in milimeters, so basically it should scale down to the same scale right?
And also, it's quite troublesome to keep going back to my titleblock dwg to edit/save and reload it back in my design. Is there anyway to explode the xRef titleblock? Every time I tried they keep saying its an external reference. Is there any way to go around this so I can edit it without going back and forth?
AutoCad :: Exploding Block Modifications
Mar 20, 2013I need to explode this block modifications. How to explode this.
View 1 Replies View RelatedAutoCAD 2013 :: Unlocking / Exploding Xref
May 29, 2012I have a Mechanical drawing with numerous Xrefs. I need to make changes to the Plumbing layers which is in O-Xref layer. I have tried to bind all Xrefs but cannot bind all of them. The piping is in the O-Xref layer. I cannot explode nor can I Xref-Edit anything in this layer. This is one of a number of drawings but this is the first one that I cannot explode or edit the layer and I have never run into this problem before.
Is there a way that the file can be locked up to prevent editing?
AutoCAD Architecture :: Exploding Text With 2013?
May 29, 2012I'm trying to export some AutoCAD files to SketchUp as DWGs... everything comes through fine, but the text (and certain other line-types) won't transfer over. I know that with AutoCAD 2008 using Express Tools, you could do this easily by exploding the text. How can I explode text using AutoCAD 2013, so that it will export as vectors in the DWG file?
View 6 Replies View RelatedAutoCad :: Change LTS In Lines In Block Without Exploding?
Sep 16, 2011For some reason the line type scale is way out to lunch on one of the lines in a block i use, so i was wondering if you can change that LTS without exploding the block, or if i can change the LTS for the layer that specific line is on without exploding the block
View 4 Replies View RelatedAutoCad :: Edit Block Text Without Exploding
Jan 8, 2012I create schematics of lighting control systems for my job, the controllers on my schematic have multiple outputs which I need to modify so they're relevant to the job.
At present I have all my blocks in a tool palette and just click and drop to add them to my schematic.
How can I tailor the text of a block without exploding it? Is this even possible?
AutoCad :: Edit Block Description Without Exploding
Feb 19, 2009I have multiple dynamic blocks that I would like to add descriptions to. If I have a block in a tool palette, I can add a description by right clicking and selecting "Properties." But I would like to add a description that shows up in the Design Center as well.
Is there a way to do this without redefining the block? Exploding makes me lose all of my dynamic properties, and I'd hate to have to recreate them.
I'm using LT 2008, by the way, so I don't have ref edit or any of that other cool stuff.
AutoCAD Civil 3D :: Exploding Surface Components To Different Layers
Feb 8, 2013Is there a way if I want my suface to be exploded for the components to be sent to different layers. For example if I make a building pad using the grading tool and create a surface for a design. I would like the minor and major contours to be on different layers. Same for my grading I would like my cut daylight boundary to go to a CG-Cut and fill daylight boundary to go to CG-Fill layers. Is there a way to do this? It would really streamline my work designing pads.
View 4 Replies View RelatedAutoCAD 2013 :: Make Object Into 3D Solid After Exploding?
Oct 14, 2013If I modify a 3D solid and it is left with two seperate pieces it is still one solid piece, even though there are two parts. My question is: What if only need one of those two sides? If I explode the object and delete the one side I cannot change the remaining object into a 3D solid. It remains as surface object.
How can make an object into a 3D solid after exploding it? I belive there is a simple command like union or some other but I can't remember.
AutoCAD Civil 3D :: Exploding Objects For Record Drawings
Nov 7, 2012C3D 2010
Win7 Professional
16M RAM
I have to put out record drawings that contain C3D objects; Surfaces, Contour labels, Points and Point tables.
Many drawing Xrefs are nested. I tried the Civil batch converter with xref binding turned off and objects set to explode, and I get error messages, and the task is never completed. Is there a work around procedure to preserve the C3D information in each drawing? Can points be exploded and retain their apperance?
AutoCAD Civil 3D :: Exploding Feature Lines To 3D Polylines
Oct 30, 2013I have several featurelines that I wish to explode to be 3D Polylines (bad, I know, but it's a test for a way to get data across from our design group to our survey group).
Last week, in this drawing, I exploded a large selection of featurelines and they all became 3D polylines, preserving their elevation data. This week, I drew an additional set of featurelines in the same drawing. When I explode them once, they lose all elevation data, becoming lpolylines at z=0. Additionally, the Prospector shows me several errors: "breaklines not added to surface" or something similar. Which is an odd result for the explode command.
Why did this work once but not a second time?
Win 7E 64-bit, Intel i7, 12 GB C3D 2012
AutoCAD LT :: Add Attributes To Existing Block Without Exploding And Remaking It?
Mar 15, 2013Can you add Attributes to a exsiting block without ,exploding it ,and remaking it?
I have made a dynamic window block and forgot to add the attribute annotation I wanted.
Tried to edit the block and add it, but when I save it and reopen the block it does not show.the attribute.
AutoCAD 2013 :: Raster Image / OLE Object Exploding?
Oct 20, 2012Insert a Raster Image or an OLE object (like a selection from a XLS worksheet).
Explode the Raster Image/OLE object.
=> the Raster Image/OLE dissapears and the frame remains (LINE objects).
I think that these types of entities should not allow exploding.