AutoCAD Civil 3D :: Exploding Surface Components To Different Layers
Feb 8, 2013
Is there a way if I want my suface to be exploded for the components to be sent to different layers. For example if I make a building pad using the grading tool and create a surface for a design. I would like the minor and major contours to be on different layers. Same for my grading I would like my cut daylight boundary to go to a CG-Cut and fill daylight boundary to go to CG-Fill layers. Is there a way to do this? It would really streamline my work designing pads.
View 4 Replies
ADVERTISEMENT
Feb 26, 2013
The name of layers of surface elements,
I’m not sure if there is a smart way to know the name of the layer of surface elements (attached). For example, the surface may contain major contour, minor contour, boundary, etc. how one can know their layers to edit them. Is this done by trial and error?!
Also, I’m not sure how the size, color and orientation of the contour text is controlled
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 8 Replies
View Related
Mar 29, 2012
So I have an existing grade surface and I am laying out a number of different site designs. I've got all my surfaces from those site designs on different layers each displayed in a different layout. I need to label existing contours on each layout in different places. I've setup additional contour label styles (two for each design, major, and minor) and layers (two for each design, major, and minor). However, when I add labels to my existing surface, they come in on the right layer, but whenever I freeze any of the many layers my contour labels are on, they all turn off. The only workaround I can figure is to make copies of my existing surface for each design option and label each independantly. However, this is inacceptable as far as data management goes, since my one file will be hundreds of megs with all those surfaces.
Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3
View 8 Replies
View Related
Nov 7, 2012
C3D 2010
Win7 Professional
16M RAM
I have to put out record drawings that contain C3D objects; Surfaces, Contour labels, Points and Point tables.
Many drawing Xrefs are nested. I tried the Civil batch converter with xref binding turned off and objects set to explode, and I get error messages, and the task is never completed. Is there a work around procedure to preserve the C3D information in each drawing? Can points be exploded and retain their apperance?
View 3 Replies
View Related
Oct 30, 2013
I have several featurelines that I wish to explode to be 3D Polylines (bad, I know, but it's a test for a way to get data across from our design group to our survey group).
Last week, in this drawing, I exploded a large selection of featurelines and they all became 3D polylines, preserving their elevation data. This week, I drew an additional set of featurelines in the same drawing. When I explode them once, they lose all elevation data, becoming lpolylines at z=0. Additionally, the Prospector shows me several errors: "breaklines not added to surface" or something similar. Which is an odd result for the explode command.
Why did this work once but not a second time?
Win 7E 64-bit, Intel i7, 12 GB C3D 2012
View 9 Replies
View Related
Jun 3, 2010
Is there a way to associate components to layers so when they are placed in a drawing they are automatically placed on the proper layer.
Example: a frame assembly is associated with a "Frame" layer that has certain attributes. That frame assembly is part of a larger assembly and when that larger assembly is placed in a drawing the frame is automatically assigned to the Frame layer.
View 5 Replies
View Related
Nov 8, 2013
I received a drawing where I have to add Bearings to an alignment and Right-of-Way lines. I have a Line Label Style that it works for that purpose. These new bearings are "Alignment Tangent Labels" and we need them to be "MTexts"
Select & explode once, and you get "Block Reference"
Select & explode again, and you get "MText"
Once that is done, unfortunatly, I get "3D Faces" objects in the background. Invisible on the drawing, but visible on paper once we plot them. The only way to remove them is by selecting around the new MText until I click on one, then, right-click, Select simnilar, Delete!
Is there any way to prevent that to speed up the process???
View 1 Replies
View Related
Dec 2, 2011
I often have to do storm pond surfaces that (for the purposes of planning) are flat on the bottom. These surfaces are created from a combination of survey data and grading groups and the tin of these surfaces is perfectably acceptable. However, when contours are shown, the flat bottom is shown with contours jig-jagging all over the place.
The attached image shows a comparison of the same pond. The top was created with survey data and grading groups; the bottom was created using contour data only. The generated surface on the top shows the bottom contour going in different directions and has parts where the an expected contour is missing.
How to correct/manipulate the surface to show a proper flat surface?
View 6 Replies
View Related
Oct 22, 2012
Has instances where you set your tolerance for the maximum triangle lenth to say 50m to reduce the amount of triangles along the edge that run at long distances. When I do this I end up with multiple surface holes and I'm not sure why as there are points in the area.
I thought well maybe it's because i should've reduced my max triangles first then added breaklines. Would this matter? I also thought I could add a line to the surface to fix the holes vs. deleting surface lines along the entire edge of a surface for many many miles.
View 9 Replies
View Related
Nov 14, 2012
I am trying to add points into a surface. I have done this before without any problems, but now I am having issues.
When I ID points which makes up the surface it gives me the correct Z level e.g. 24.5m, however when I hover over the surface it shows me the surface name and a different z level e.g. 0.65m. What is the reason for this difference in z levels? I think this may be causing the issue I am having when I add new points.
I select the surface and use the 'edit surface command' in the ribbon, choosing add point.
When I add a point at the level I require(23.89m), it puts it in a lot higher than the surrounding area, so I tried to put the point in to the lower z levels (0.4m) it puts it in a lot lower!
View 5 Replies
View Related
Dec 10, 2012
My goal is coming up with the volume bounded by the design surface and the existing surface. I don't have the design surface modeled yet.
Do i need to create alignment offsets?. Alignment 1 profile view is also attached. Then Alignment2.
What about starting with alignment1 profile view? Since I have created a polyline as the design profile ?
how do I shrink labels? Where is it in the settings ; the Align folder had been check.
View 2 Replies
View Related
Oct 2, 2012
I am issues with DEM files that I am downloading from the USGS website.I download 24k, elevation for the area I need. I then choose staged 1 second, add a surface to a blank drawing, then upload the DEM files to the surface.
The surface imports correcty, but when I try to import points taken by a surveyor on the same drawing, they plot incorrectly.The DEM surface and the points from the surveyor do not correspond. Also, the DEM surface is in meters, not feet. I have tried changing drawing settings, datum types, coordinate types, etc.
View 9 Replies
View Related
Apr 4, 2012
Is there any way to change the referenced surface on a Surface Elevation Label. I can see the surface in the properties but cannot change it.
C3D 2011
View 1 Replies
View Related
Jul 29, 2013
I have a project involving 3 programs. I am creating a planned development in 3d to be 3d printed when finished. The project is a 5 acre tract containing 8 buildings. I have built the surface in C3D and each building in Revit. The buildings are not in the same Revit file. For my solid work, I will bring the files over into 3ds Max Design to section into smaller quadrants to build in the 3d printer.
The questions:
Would it be better to import the surface into Revit to merge surface and buildings together?
Would it be better to import the buildings into C3D to merge entities?
Would it be better to bring those entities into 3ds Max and then merge them into one? Will 3ds Max Design allow me to insert entities accurately in the environment?
View 6 Replies
View Related
Sep 15, 2013
I need to create a sub-set surface from my main surface. not sure what the vernacular is for a "subset surface" in c3d but i do have a feature line that bouinds the desired area, but that is as far as i can solve.
i did try creating a new surface - pasted the main surface in the edit definition, then deleted triangles until the boundary alighned wiht my featureline. This seemed to work, but when i view the properties of the smaller subset suface, it shows a mimum and maximum elevation that is incorrect.
View 3 Replies
View Related
Mar 1, 2013
Im currently using an addon for Civil 3D called Novapoint. It allows me to create 3D models of surfaces made out of 3d faces and easily models cut and fill 3d-models for me.
The only thing i need to create a cut and fill model is one or several ground surfaces (existing ground, earth layers, rock etc. whatever i need) and a closed polyline/3Dpolyline that represents the level I want my cut and/or fill model.
I enter the spcifications I want such as; earth cut angle, rock cut angle, fill angle, select which surfaces i want to include in the model calculation and select the polyline.Novapoint then calculates the cut/fill model from the surfaces to the polyline and models the different cut/fill angles and gives me the results in a 3d-face model and a specification of the volyme of rock cut, earth cut an fill.
1. Novapoint is quite unstable and crashes alot
2. You cant create profiles out of 3d faces
3. Novapoint does not automaticly combine the start surfaces with the modeled cut/fill surface
4. A large surface made out of 3d-faces demands alot of computer power
So I want to how I do the same that Novapoint does for me in Civil 3D? (I have access to Civil 3D 2007-2013 depending on which one you're using)I know I can take the 3Dfaces i created in Novapoint and make a surface in Civil 3D with them but I want to exclude Novapoint completely.
View 9 Replies
View Related
Mar 26, 2012
all of a sudden whenever I run audit on my corridor file the surface definition becomes a snapshot. To add to the drama, the corridor surface will not paste into an empty surface. Why?
View 2 Replies
View Related
Feb 7, 2013
My problem added with pic ... I want to make volume calculate for sample road project. When I try to compute materials I cant use Corridor surface for DATUM... There is only target surface on option..
View 2 Replies
View Related
Mar 6, 2012
I am trying to visualize a road project. The problems is, whenever the corridor surface goes below the EG surface (when the road is in cut) the EG surface is the only visible surface.
I sort of need to subtract the corridor surface from the EG surface, or merge the both surfaces into one.
View 3 Replies
View Related
Oct 9, 2013
I was given a AutoCAD file (see attachment) and I need to make a visual surface. This is for a university project and I don't have a lot of experience with Civil 3D.
View 2 Replies
View Related
Nov 29, 2012
I am having some difficulty figuring out how to get the extents to a civil 3d label object. I want to be able to select a label, and draw a custom polyline around it (in dragged state) and draw a leader or multiple leaders from that new polyline. I just can't seem to figure out how to get at the label data itself.
View 2 Replies
View Related
Feb 27, 2013
Editing components of “profile view”,
In the case of horizontal alignment, one can choose any component and edits its properties (attached) such as its label height (attached).
I’m wondering why such option is not available in the case of “profile view”. The selected component doesn’t bring its edits option (as in the case of horizontal alignment”) and thus one can’t edit its properties like labels (attached).
Then how to edit the components of the “profile view”?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 3 Replies
View Related
Dec 1, 2013
I want to modify the default Profile Grade Break label style that comes with the product as I don't want the line component in the style. When I delete the line component I have to reconfigure the attachment points of the remaining components. I want the marker to attach to the feature, then the PVIS to the marker, then the PVIE to the PVIS. The problem is these components are in the wrong order in the style and thus I can't get the PVIE to be left aligned with the PVIS. There apparently is no way to re-order the components in the style. The only solution seems to be to delete and recreate them in the proper order. Is this the case? If so then there defintely needs to be an enhancement in the product to change the order.
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
View 9 Replies
View Related
May 3, 2013
I was wondering if there is an easy way to trim one surface to another. Right now, I have two slopes (3:1) that are perpendicular to each other. They meet at a corner and I have extended them past each other so that I could see the intersecting edge. Now I would like to trim them to each other like you would a polyline etc... but I am not sure how to do this.
If I select surf trim, it tells me they are the wrong object type, but they are tin surfaces?
View 5 Replies
View Related
Jan 8, 2014
I have alingment style components set to various layers, where I control their plot and view style. After years of successful control, recently I found that I the viewports are not displaying the layers correctly pertaining to the sytle. For example, I have line & curve components set to a layer C-Road-Cl and all properties by layer. Then in various viewports throughout the project, I'll set viewport overrides to control color and plotsytle of those components.
Today, I found that the C-Road-Cl layer will not control the view of the components or the plotsytle, and that the objects are only being controlled by the layer that the object is on. But, this does not relate to Object Layers Drawing Settings, as I have the "immediate and independent layer on/off...." box unchecked. Further, nothing seems to affect the color of the object in the viewport.
After further research, I found that the a completely different layer is controlling the viewport display of the "line & curve" components (C-Road-Stan) and the alignment object layer is controlling the plotstyle.
View 2 Replies
View Related
Apr 22, 2012
I'm attempting to create a profile view and then modify the label by overriding the text components. Unfortunately the profile view bands don't populate the labels until after my command is complete making it not possible to modify them in one command. Is there a way to update the band to have it show the labels?
Civil 3D 2013
View 3 Replies
View Related
Dec 31, 2013
I would like to know how to write a routine to thaw all layers in current drawing and multiple xrefs; then freeze all, then thaw only certain layers globally for a drawing that is open. Such as a dimension plan will thaw only *-BLDG, *-DIMS, *-RD-*, *BNDRY.
I would like to create one that will fit every project which has a different xref name.
View 2 Replies
View Related
Oct 24, 2012
I used a 2d polyline to create a surface boundary for a surface created. The polyline is a closed loop. For the boundary type it is outer, unchecked Non-destructive breakline, and mid-ordinate distance = 1.
My problem is that when I do this I only get a small portion of the surface to show up within my surface boundary. If I don't have a surface boundary the entire drawing surface shows up no problem.
The purple polyline is my boundary and the light blue is the surface created within the boundary.
View 3 Replies
View Related
Dec 17, 2013
Is it possible to export created surface from civil to revit architecture? If yes , How? And if its not possible - maybe i can somehow import cogo points to revit?
View 6 Replies
View Related
Nov 3, 2011
I recieved some CAD files from the architect and am not sure if theyre drawn in 3D or in revit. But everytime I go to explode the wall the doorways dissappear.
View 3 Replies
View Related
Jun 6, 2005
When defining a block it is possible to choose wether the block can be exploded or not. Is there a way of undoing this. I can edit the block in full version with refedit but in LT there is no way of editing this block. I can see advantages of this setting but I imagine someone accidentilly unpicking this box and creating unexplodable blocks without noticing.
View 9 Replies
View Related
