I have been working for a new company who likes to use blocks extensively. My question is this, is it possible to quickly change the layer of the components of a block? That is, the lines, arcs, etc of the block. Or, is the only way to explode the block, change the layer and remake the block?
View 2 RepliesHow do I create a new .dwg that has no layers, blocks, text styles and dim styles? 2013 Civil 3D
View 3 Replies View RelatedWhen I bring a part in as a block into an assembly, is there a way to turn the block of just that part off and all its layers inside that block?
View 4 Replies View RelatedI’m currently working on getting a system for easier plant layout management. Part of which is condensing what started as 195 mostly random layers into about 15 usable layers.
Problem:
I have about 28 more layers that need to get rid of and I can’t delete them because there are lines assigned to them. However, when I hide all the layers I need so that only the unnecessary layers are showing, there’s nothing there.
Side Note:
I know this problem is most likely because there were layers applied to features deep within blocks. I just don’t want to go through the 700+ block to check each layer assigned to each line.
(This file I was given to start with is a mess. Examples: Some of the blocks have the same exact feature that’s buried 7 blocks deep with no features added to justify an extra bock being there. Some of the blocks aren’t even being used in the layout. Name of the block has no coloration with the actual thing it represents. Stuff like that…)
Question:
Is there a way of hunting down these layers in the blocks to delete / change them without checking each individual block? Or is it possibly because the layer i need to get rid of is applied to a block that’s not being used in the layout?
When working with layers, AutoCad 2011 goes into a "not responding" mode for a time. The more layers the longer it stays. Ctl,Alt Delete is not the answer.
My system is a Win 7, 32bit, with 4.0 Gb ram.
The system resource moniter is in the 67% MEM usage range. Normal usage is 47% with nothing visible on the display.
I was working on a drawing file when my ribbon went haywire. My layer drop down seems frozen so it only shows the current layer and the hatch edit ribbon does not function properly.
The issue with the layer drop down is if I select a line, fill, etc. on any layer the layer drop down on the home ribbon does not change to show the layer that item is on and if I select multiple items on different layers which usually causes the drop down to go blank it still shows the current layer. The object color, line thickness and linetype all change on the properties tab to show the properties of the selected item so the entire home ribbon is not frozen. If I scroll through the layer drop down and select a layer to move the selected item to a new layer AutoCAD responds *Invalid selection* Expects a point or Window/Last/Crossing/BOX/All/Fence . . .
The hatch edit ribbon is completely useless. The angle and scale boxes are greyed out and if I select any of the buttons (Set Origin, change hatch pattern, etc.) AutoCAD again responds with *Invalid selection* . . .
The only CUI shown is the ACAD.CUIX and I have done a Reset and Restore, changed the workspace, restarted AutoCAD and restarted my computer. What am I missing?
AutoCAD 2011with current patches
Windows XP, SP3
We use AutoCad to name our dxf files for our Burn Table and whenever we get a new part it is a repetitive task to input layers and common text. So what I am curious is can AutoCAD input the layers and text automatically using a Macro?
I want the Macro to put in 6 layers and choose the layer color and title then input text boxes with word in 3 different layers. There will be about a total of 10 different text boxes with text already put in the boxes by the Macro.
I am currently updating and coming up with a better system for are plant layout file for AutoCAD. When this project is complete, it will be set up so if someone needs to make a change they can just make a copy of the X-Ref file for the area they will be updating and hand it back in when there done. I will review the updated X-Ref then switch out the old X-Ref file for the updated one.
Problem: the problem I am having is when I am in the master drawing that contains all the X-Ref files, the layers list becomes enormous. There are about 30 to 40 different X-Ref files with 15 layers each. Those 15 layers contain the exact same information but you have to edit them individually.
Question: Is there a way to make the 15 layers in the master effect the corresponding layer in all the X-ref files? For instance, you hide the “Machines” layer in the master and it hides the “Machines” layer in all the X-ref.
Side Note: If you were going to make the suggestion “use Xbind” I’ve tried it and it doesn’t work well because “Xbind” creates a new layer you have to assign to things instead of making the layers relate to one another.
I'm using imported blocks in my layers. I use the same layer with two maps but they do not print the same.
View 2 Replies View RelatedInputting bearing N5 degree27'23"W autocad 2010
View 8 Replies View RelatedI have multiple copies of a block, and when I move one copy to a layer, it doesn't seem to actually move.
For example, if I have 2 copies of block A, and move one copy from layer "Inside" to layer "Outside", then hide layer "Outside", the block I just moved doesn't hide, but everything else on layer "Outside" does hide.
When I inspect the moved block, the properties say it's on layer "Outside". What is going on?
I was wondering if there is a way to import a bunch of detail drawings into my template, without all the layers that go along with the details.
See, sometimes I need to use details from other companies within my drawings, and they have crazy annotations and a lot of different layers. It would be nice if I could import their details as one big block into my template that I like to work with when doing my work. Is there a way that I can import that details block (including its color codings and such, not changing anything) onto ONE LAYER. Otherwise is there a way to create like a folder within the layer manager that I can dump all those layers?
It's just such a mess once I drop their details into my work, it would be nice if I could isolate all that stuff, yet keep everything as it looks on their files..
I have my title blocks, detail titles, bugs and other attributable blocks set up in 2007 and am using them in 2009. When I double click on the block to open the dialogue box in vs 2013 I don't know what to do with the dialogue box that comes up. I am an average user and set up these original attributable blocks, but I feel confident to modify them through 2009. But I don't know what to do with this dialogue box. I just want to be able to fill in the text I want in each field.
I've attached a pdf showing the two dialogue boxes I get, one with 2009 and one with 2013.
I have a piece of machinery with a platform around it. Right now, I have it set up where, you bring in the block on a -proposed layer, and then you can change it to a -existing layer, and everything changes to that new layer's colors (elements on 0 and bylayer).
However, what I would like to have happen is, inside that same block, I would like for the platform to change from a different color to a different color when the machine does.
So... the entire block (machine + platform) is on a layer - machine-pro. I bring it in, and everything is blue (for proposed). When I switch it to the machine-existing layer, it changes to a dark blue. I know I can have the platform be red and the machine blue, but when I switch the machine over to the existing (dark blue) the platform would still be red (because its set as a "hard" color other than by layer).
Is there a way to make the platform turn to a dark red (existing) from the bright red (proposed) when the machine turns to a dark blue (existing) from bright blue (proposed), but it all be in one block?
I'm doing very complex drawing of a heating plant on a big ware house site. So I'm using two kinds of layers. I don't know, weather I'm using everything how it is to use or not, because I learned everything by myself.
The first layers are my so called "line type layers": hidden line, center line, wall, border, ... So all the different types of lines I'm using, when is start my drawing. I block all lines, which belong to one part like screws, doors, pips, engines, .. And at the end I put my "part" blocks" on my "part layers", like deashing, ash bin, boiler, building, electrical.
So lets say I have the layer "deashing", which includes several blocks like "deashing screw", "deashing drive", "deashing screw 2", .. And each block consists of several lines, which are on the layers, like "hidden line", "center line" and "black thin line", ...
And now I want to switch of everything in my drawing, which belongs to the "deashing layer" to get a better overview. So I "turn off" the layer "deashing", but I can still see it in my drawing. It just disappears, when I freeze the layer, but it should disappear, when I "turn off" the layer, too, shouldn't it?
So I hope I didn't wrote to much, but I good explanation is worth everything. So why does it not disappear or do I use the layers in a wrong way.
When inserting certain blocks that were created in the 0 layer, they are not taking on the color of the layer in which I insert them.
Now when I click on the object, it shows up as being on the correct layer but the object is still white, I ran into something like this before, and was able to fix it by going into the Block Editor and setting the layer in there. This only happens on certain blocks.
LT2011 I was working on a drawing, save and closed program. When I got back from a meeting and re-opened the drawing it had converted some of my text into blocks. Question is how do I get it back to text or am I screwed?? Also since I first bought the program I've never been able to get it to work, tried both drop down menu and also short cut button neither works.
View 3 Replies View RelatedDynamic blocks not working on one new office computer with AutoCAD 2013 - The problem seems mainly with the stretch feature. some features like flip and visibility states seem to work. The blocks are good, they work on other machines and on saved files from that computer.
We have tried doing a repair with the disk and updating with service pack 1.1.
Other computer have AutoCAD MEP 2013, but these are not MEP features.
I read an older post (2007) regarding the blocks not working due to the shortcut menus in drawing area no checked in the options, but that does not seem to be the issue.
After all this time is there a way to assign layers to different objects with a block? Perhaps using Visibility states or Lookups?
As an example:
I have a dynamic block with a door swing and text. As I increase the size of the door the text changes to reflect door size. The objects are all on the 0 Layer. When I insert the block I can assign a 'Text A' Layer to the text and a 'Door A' layer to the door. So when I switch layer states around I will either see the door, the text or both. Then I move to the second floor which has been stacked on the first floor. I insert my DB and assign layers 'Text B' and 'Door B' respectively to the text and door.
Finally when I go to my layer states I either select 'First Floor' or 'Second Floor' and the respective blocks appear depending on the layer state.
We have blocks of process valves. The valve body in layer "valve" and the ports in layer "pipe" The Lower port of the valve is for "fluid A", the upper port for "fluid B".
Now we want to dynamically choose the layers for both the lower port and (a different layer for) the upper port. Dynamically because the same valve can be used twice with completely different fluids / layers. Is there an attribute or dynamic parameter to do this?
I cleaned up my block and I am trying to use a field to reference a polyline for it's overall distance. The distance changes with my lookup action. After rotating and going back and forth from "On" - "Off" - "Both Off", then back to "On", the red polyline doesn't stretch back on it's original plane.
View 5 Replies View RelatedI'm new to dynamic blocks. In my first attempt to create a simple dynamic block with various visibility states in which each would have it's own attribute, the only attribute that works is the attribute in the first visibility state listed. I have read all the postings I could find here in the group on this subject and have made the following changes suggested here to the block:
1. All attributes have distinct tags and prompts. (I even erased all the originial attributes and created new with original tags.)
2. All attributes are locked in position.
3. I REGEN after selecting a different visibility state.
None of these changes has had any effect. Still, then only attribute that opens an attribute edit dialogue box is the "W" attribute in the first visibility state listed.
Are there any official document describe the limits in a DWG file? For example, the maximum number of blocks that can be added, the maximum number of layers, the maximum length of an object name, etc.?
View 2 Replies View RelatedI was able to write a LISP that replaced each node with a block of my choice.However, now I need to find a way now to replace the blocks with different blocks.Each point shares the exact same block called "PILE". Different blocks are on different layers and have 11 different colors. I'd like to replace blocks on layer 1 with a block called "1" and blocks on layer 2 with a block called "2" and so on.I was hoping there would be an easy way to do this in LISP, but I've been unable to get any of my scripts to work.
I've attached a link that visualize what my drawing is currently looking like: [URL] ......
The routine below delete group of blocks by name, but if the blocks are on locked layers, these are not removed.
How can improve the lisp?
(defun c:deleteblock (/ rn ss)(defun Jd (realname) (setq ss (ssget "x" (list '(0 . "INSERT")(cons 2 (strcat "`*U*," REALNAME))))) (mapcar '(lambda (x) (if (not (eq REALNAME (vla-get-effectivename (vlax-ename->vla-object (cadr x))))) (ssdel (cadr x) ss))) (ssnamex ss))(setq ss_len (sslength ss)) (command "_erase" ss "") ) (setq rn (vla-get-effectivename (vlax-ename->vla-object (car (entsel "
Select the block you want to delete:"))))) (jd rn) (princ (strcat "
" (itoa ss_len) " Blocks called "" rn "" has been deleted")) (princ) )
I have a drawing with a bunch of layers that cannot be deleted since they are nested in block definitions. However, the blocks are not in use and cannot be purged. I think it is because they are referenced for point styles, that are also not in use. Is there a way to delete the point style in order to clear these layers and blocks?
View 1 Replies View RelatedI've made a dynamic block that consists of two lots of attributed text and has the alignment function in it but the alignment part doesn't work when looking through a viewport into modelspace ie i can move it by grapping the alignment grip point - it won't move at all. If i'm in the model tab the block works fine exactly how i made it. I'm the only person in my offie with 2011lt so i don't know if it is my computer or if it is a setting in 2011lt. It works fine in 2011 full and a few other versions around here aswell.
View 1 Replies View Relatedi am trying to restrict users from modifying certain attributes in a block,i can create the blocks with some of the attributes on locked layers, but then autocad pops up an annoying alert box, is there a way to disable this? the other option i can think of is to redefine the commands *ddedit, *attedit, *ddatte,*attipedit,
View 5 Replies View RelatedI have a dwg with as many as 150 of the same block inserted. What command will give me a count of those blocks?
View 3 Replies View RelatedI'm working on creating some blocks for our office. Basically it is a simple block with a few lines that remain and then a couple attributes you can click on and change. I have added the attribute and all is working well.
My only issue is I would like to make the text in the attributes to be bold. For some reason I can't see to do this. Is it not possible.
Basically I want to try and get some of the attributes to stand out more than others. I tried changing the color and the lineweight of the attibute (which worked the color is different) but when it prints it doesn't change at all.
How do you add blocks from another file? Also can a block span multiple layers? How do you change the layer of a block?
View 1 Replies View Related