AutoCad 2D :: Blocks And Layers Project
May 21, 2011Inputting bearing N5 degree27'23"W autocad 2010
View 8 Replies
ADVERTISEMENT
AutoCad :: Using Blocks And Layers
May 30, 2011I'm using imported blocks in my layers. I use the same layer with two maps but they do not print the same.
View 2 Replies View RelatedAutoCad :: Why Blocks Not Moving Layers
Nov 12, 2011I have multiple copies of a block, and when I move one copy to a layer, it doesn't seem to actually move.
For example, if I have 2 copies of block A, and move one copy from layer "Inside" to layer "Outside", then hide layer "Outside", the block I just moved doesn't hide, but everything else on layer "Outside" does hide.
When I inspect the moved block, the properties say it's on layer "Outside". What is going on?
AutoCad :: Importing Blocks Without All Layers?
Jul 3, 2012I was wondering if there is a way to import a bunch of detail drawings into my template, without all the layers that go along with the details.
See, sometimes I need to use details from other companies within my drawings, and they have crazy annotations and a lot of different layers. It would be nice if I could import their details as one big block into my template that I like to work with when doing my work. Is there a way that I can import that details block (including its color codings and such, not changing anything) onto ONE LAYER. Otherwise is there a way to create like a folder within the layer manager that I can dump all those layers?
It's just such a mess once I drop their details into my work, it would be nice if I could isolate all that stuff, yet keep everything as it looks on their files..
AutoCAD Dynamic Blocks :: Same Block - Different Layers
Dec 6, 2012I have a piece of machinery with a platform around it. Right now, I have it set up where, you bring in the block on a -proposed layer, and then you can change it to a -existing layer, and everything changes to that new layer's colors (elements on 0 and bylayer).
However, what I would like to have happen is, inside that same block, I would like for the platform to change from a different color to a different color when the machine does.
So... the entire block (machine + platform) is on a layer - machine-pro. I bring it in, and everything is blue (for proposed). When I switch it to the machine-existing layer, it changes to a dark blue. I know I can have the platform be red and the machine blue, but when I switch the machine over to the existing (dark blue) the platform would still be red (because its set as a "hard" color other than by layer).
Is there a way to make the platform turn to a dark red (existing) from the bright red (proposed) when the machine turns to a dark blue (existing) from bright blue (proposed), but it all be in one block?
AutoCAD 2010 :: How To Create New .dwg With No Layers Blocks
Feb 15, 2012How do I create a new .dwg that has no layers, blocks, text styles and dim styles? 2013 Civil 3D
View 3 Replies View RelatedAutoCAD 2010 :: Working With Blocks And Layers
Apr 30, 2012I have been working for a new company who likes to use blocks extensively. My question is this, is it possible to quickly change the layer of the components of a block? That is, the lines, arcs, etc of the block. Or, is the only way to explode the block, change the layer and remake the block?
View 2 Replies View RelatedAutoCad :: Switching Of Layers Including Blocks?
Oct 14, 2011I'm doing very complex drawing of a heating plant on a big ware house site. So I'm using two kinds of layers. I don't know, weather I'm using everything how it is to use or not, because I learned everything by myself.
The first layers are my so called "line type layers": hidden line, center line, wall, border, ... So all the different types of lines I'm using, when is start my drawing. I block all lines, which belong to one part like screws, doors, pips, engines, .. And at the end I put my "part" blocks" on my "part layers", like deashing, ash bin, boiler, building, electrical.
So lets say I have the layer "deashing", which includes several blocks like "deashing screw", "deashing drive", "deashing screw 2", .. And each block consists of several lines, which are on the layers, like "hidden line", "center line" and "black thin line", ...
And now I want to switch of everything in my drawing, which belongs to the "deashing layer" to get a better overview. So I "turn off" the layer "deashing", but I can still see it in my drawing. It just disappears, when I freeze the layer, but it should disappear, when I "turn off" the layer, too, shouldn't it?
So I hope I didn't wrote to much, but I good explanation is worth everything. So why does it not disappear or do I use the layers in a wrong way.
AutoCAD 2010 :: Hiding Layers Inside Blocks?
Mar 6, 2012When I bring a part in as a block into an assembly, is there a way to turn the block of just that part off and all its layers inside that block?
View 4 Replies View RelatedAutoCad :: Inserting Blocks Not Taking Color Of Layers
Jun 28, 2013When inserting certain blocks that were created in the 0 layer, they are not taking on the color of the layer in which I insert them.
Now when I click on the object, it shows up as being on the correct layer but the object is still white, I ran into something like this before, and was able to fix it by going into the Block Editor and setting the layer in there. This only happens on certain blocks.
AutoCAD Dynamic Blocks :: Assign Layers To Different Objects With A Block?
Apr 11, 2013After all this time is there a way to assign layers to different objects with a block? Perhaps using Visibility states or Lookups?
As an example:
I have a dynamic block with a door swing and text. As I increase the size of the door the text changes to reflect door size. The objects are all on the 0 Layer. When I insert the block I can assign a 'Text A' Layer to the text and a 'Door A' layer to the door. So when I switch layer states around I will either see the door, the text or both. Then I move to the second floor which has been stacked on the first floor. I insert my DB and assign layers 'Text B' and 'Door B' respectively to the text and door.
Finally when I go to my layer states I either select 'First Floor' or 'Second Floor' and the respective blocks appear depending on the layer state.
AutoCAD Dynamic Blocks :: Choose Item Layers Within A Block
May 24, 2013We have blocks of process valves. The valve body in layer "valve" and the ports in layer "pipe" The Lower port of the valve is for "fluid A", the upper port for "fluid B".
Now we want to dynamically choose the layers for both the lower port and (a different layer for) the upper port. Dynamically because the same valve can be used twice with completely different fluids / layers. Is there an attribute or dynamic parameter to do this?
AutoCAD 2013 :: Limits In DWG File (Maximum Number Of Blocks / Layers)?
Dec 26, 2013Are there any official document describe the limits in a DWG file? For example, the maximum number of blocks that can be added, the maximum number of layers, the maximum length of an object name, etc.?
View 2 Replies View RelatedAutoCAD 2010 :: Removing / Changing Line Layers Buried In Blocks
Mar 21, 2012I’m currently working on getting a system for easier plant layout management. Part of which is condensing what started as 195 mostly random layers into about 15 usable layers.
Problem:
I have about 28 more layers that need to get rid of and I can’t delete them because there are lines assigned to them. However, when I hide all the layers I need so that only the unnecessary layers are showing, there’s nothing there.
Side Note:
I know this problem is most likely because there were layers applied to features deep within blocks. I just don’t want to go through the 700+ block to check each layer assigned to each line.
(This file I was given to start with is a mess. Examples: Some of the blocks have the same exact feature that’s buried 7 blocks deep with no features added to justify an extra bock being there. Some of the blocks aren’t even being used in the layout. Name of the block has no coloration with the actual thing it represents. Stuff like that…)
Question:
Is there a way of hunting down these layers in the blocks to delete / change them without checking each individual block? Or is it possibly because the layer i need to get rid of is applied to a block that’s not being used in the layout?
AutoCAD Visual LISP / AutoLISP :: Replace Block On Different Layers With Different Blocks
Jun 20, 2012I was able to write a LISP that replaced each node with a block of my choice.However, now I need to find a way now to replace the blocks with different blocks.Each point shares the exact same block called "PILE". Different blocks are on different layers and have 11 different colors. I'd like to replace blocks on layer 1 with a block called "1" and blocks on layer 2 with a block called "2" and so on.I was hoping there would be an easy way to do this in LISP, but I've been unable to get any of my scripts to work.
I've attached a link that visualize what my drawing is currently looking like: [URL] ......
AutoCAD Visual LISP / AutoLISP :: Remove Blocks In Locked Layers?
Jun 25, 2012The routine below delete group of blocks by name, but if the blocks are on locked layers, these are not removed.
How can improve the lisp?
(defun c:deleteblock (/ rn ss)(defun Jd (realname) (setq ss (ssget "x" (list '(0 . "INSERT")(cons 2 (strcat "`*U*," REALNAME))))) (mapcar '(lambda (x) (if (not (eq REALNAME (vla-get-effectivename (vlax-ename->vla-object (cadr x))))) (ssdel (cadr x) ss))) (ssnamex ss))(setq ss_len (sslength ss)) (command "_erase" ss "") ) (setq rn (vla-get-effectivename (vlax-ename->vla-object (car (entsel "
Select the block you want to delete:"))))) (jd rn) (princ (strcat "
" (itoa ss_len) " Blocks called "" rn "" has been deleted")) (princ) )
AutoCAD Civil 3D :: Unable To Remove Layers / Blocks / Point Styles
May 3, 2012I have a drawing with a bunch of layers that cannot be deleted since they are nested in block definitions. However, the blocks are not in use and cannot be purged. I think it is because they are referenced for point styles, that are also not in use. Is there a way to delete the point style in order to clear these layers and blocks?
View 1 Replies View RelatedGIMP :: Layers Missing When Open Project (XCF)
Feb 29, 2012I just opened up a project (.xcf) I hadn't worked on in a couple days only to find about half of the layers missing. I have no idea what's happened to them and I'd really like to get them back.
Using GIMP 2.6.11 and Windows Vista
AutoCAD Visual LISP / AutoLISP :: Create Blocks With Some Of Attributes On Locked Layers
Jan 4, 2012i am trying to restrict users from modifying certain attributes in a block,i can create the blocks with some of the attributes on locked layers, but then autocad pops up an annoying alert box, is there a way to disable this? the other option i can think of is to redefine the commands *ddedit, *attedit, *ddatte,*attipedit,
View 5 Replies View RelatedAfter Effects :: How To Find Number Of Keyframes And / Or Layers Used In A Project
Sep 12, 2013how many keyframes and layers I ended up using. Does AE have any kind of function for getting this info?
View 1 Replies View RelatedIllustrator :: Export To DWG - Some Layers Are Not Exported / Some Appear As Blocks
Nov 12, 2012I was trying to export a dwg file from Illustrator CS5 in order to edit the drawing in AutoCAD and keep the layer structure. Unfortunatly it results in a bunch of mistakes... some layers are not exported, some layers appear in AutoCAD as blocks.
View 1 Replies View RelatedGIMP :: Creating Basic Logo - Blocks Of Text Appear As Different Layers
Nov 24, 2011So I've created a few different blocks of text, which appear as different layers in the layers dialog box.
The area I've created them in 640x400. The various words placed together is much smaller though. So I want to crop the image to just be their size. However, attempting to select all the text bits fails, as I seem to be confined to whatever layer I last clicked on the layers dialog box. e.g. The word "shop" is selected, and highlighting all words using results in only the word "shop" being active to work with.
How do I unselect a layer, or choose all of them??
AutoCAD Architecture :: Tool Palettes Aren't Same In New Project As In Project Template?
Dec 6, 2011I have a Project Template that is used when creating a new project. I noticed that the Tool Palette in the Project Template and the Tool Palette in the new Project are not the same. How do I get the new Projects to pull the same Tool Palettes from the Project Template?
View 2 Replies View RelatedAutoCAD 2010 :: Project Browser - Create New With Project Number Prompt?
May 14, 2012How can I change the way the Project Browser maps the creation of new projects?
Currently, the new project folder is created and named according to the Project Name prompt. We want the folder to be named according to the Project Number prompt...
AutoCAD Inventor :: Can Project Number Be Assigned To Project File
May 6, 2013Is it possible to assign a project number to a project file and have it fill in the project Iproerties field?
View 2 Replies View RelatedAutoCAD 2013 :: Project Navigator - Change Project Number
Jul 17, 2013I have to set up a project in Navigator so we can get started on it but I will have to go back and change the project number when we get it.
My question is how do I change the project no so that it re paths everything and reorganizes itself numerically in Windows Explorer...or should I just create a new project in Navigator and copy the files I need into the new project?
AutoCAD Inventor :: Add Non Project Files To Project?
Dec 12, 2011I do not have vault installed and I am trying to add sub files to my project. As of now my project has to find many of my files and I do not want to copy and past them into my project folder as this will mess with my parts numbering system. I want only one part / assembly file per part. I assume that you can do this with the project dialog box or some other system tool I just can not seem to figure it out.
View 1 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Select All Blocks Like Selected Blocks With Window?
Feb 28, 2011(defun CELBLKS ( / e blk ss blkl)
(setq blkl "" ss (ssadd))
(while (setq e (entsel "
[Code]....
i have this lsp, it works great but how can modify it if i want select with a window.? exemple: if i have 3 differentes blocks, i want to select them with windows and the lisp select all blocks that are identical of those 3.?
AutoCAD Dynamic Blocks :: Zoom All & Extents With Blocks Containing Fields On Layout Tabs
Aug 22, 2013We have a new title block which now contains various fields to automatically populate the drawing number, number of sheets, issue etc. The problem we have is when we go to zoom all or extents on a layout tab it moves the layout to the right each time. If we only have one layout or we use a plain title block i.e. with no fields, the zoom works fine (layout stays put in the center). This is also true if we directly insert a field onto the layout - again no problems.
The cause of the problem only happens when a block containing a field is inserted onto the paper space of a layout and,there are multiple layouts containing blocks with fields.
AutoCAD Dynamic Blocks :: Finding Number Of Times Specific Blocks Used In A Drawing?
Aug 8, 2013How to find no of times specific blocks used in a drawing?
View 9 Replies View RelatedAutoCAD Dynamic Blocks :: Stretching Same Parameter In All Blocks In Drawing From One Field?
Jul 15, 2011How do I manipulate a height parameter all of the dynamic blocks in the drawing from one single field? Say a field located in the drawing properties or on the drawing itself.
For example: Multiple blocks of different walls of same height with other blocks of things on located on those walls, dependant on the wall height, all linked to and changed by a single field. Possibly a Wall Height field located in the custom tab of the drawing properties.
I can pickout each of the blocks and change them at the same time in properites menu because they all share the same parameter name. I would just like to have that height parameter of every block in the drawing, that has that specific parameter controled by a single field. Which I could enter a new height at anytime that would change every block in the drawing to that height.