AutoCAD 2013 :: Migration Toolbars From 2007 To 2014?
Jul 6, 2013
i wish to migrate all default icons of AutoCAD2007 to AutoCAD2014: i' ll wish to overwrrite default icons of 2014 with icons 2007
i know that i can do this with cui save every icon in a bmp file and sustitute every icon of 2014 with bmp file of 2007....
but i think it s so boring and long to do...
does it exist any faster mode?
P.S. i tried to export in a cui file all default toolbar of 2007: ii opened it in 2014... but icons are 2014 default!
same file cui opened in 2007 and 2014 has different icons images
View 6 Replies
ADVERTISEMENT
Jul 1, 2013
I have been migrating dozens and dozens of .pat files from one version of AutoCAD to the next for many, many versions. Most recently in AutoCAD 2013 the .pat files were stored in the C:Program FilesAutodeskAutoCAD 2013SupportPatterns - worked fine. During the migration to 2014 I received an install error report stating that this subdirectory did not exist and could not be created. Alternately it stated that the new default path C:UsersUsernameAppDataRoamiongAutodesk|AutoCAD 2014R19.1enuSupport will be used instead.
At first I created the Patterns subdirectory where it could not be done automatically. No luck. Then I placed the Patterns subdirectory in C:UsersUsernameAppDataRoamiongAutodesk|AutoCAD 2014R19.1enuSupportPatterns and no luck.
View 5 Replies
View Related
Oct 28, 2013
We've finally nibbled the bullet and upgraded to 2014. I'm getting errors in the Task Scheduler logs about missing files in various projects. It would appear that (almost) without exception, the failed files are all Content Center parts that were inserted as custom parts. Do I need to run a migration on the Content Center parts (Inventor/ContentCenter Files/R2013/en-US) in order for the custom parts to migrate properly?
View 9 Replies
View Related
Dec 20, 2013
Happens every year. Upgrade and spend half a day or more trying to get everything back to the way I had it. All I have is a couple small toolbars for commands that are several clicks deep in the ribbons and I want them "right there" all the time.
I thought Autodesk 360 might be a good tool for this. All it did was DOWNLOAD some old settings and destroy one of the toolbars I'd created. They really need an override in there to specify upload, download, overwrite or don't.
I'm trying to migrate (I guess that's the technical term) my settings from 2013 Mechanical to 2014 Mechanical. It's probably too late already, after 360 did its deal, but I really want to get this down so we don't go through it every year anymore.
I maintain that PTC had this part of it down Pro/ENGINEER. You had a config file that was editable plain text.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
View 9 Replies
View Related
Nov 14, 2013
I have a small office and 2 of the associates are using autocad lt 2014 1 is using 2013 and I am using 2007. Up until a few months ago we were all on 2007.
Now when I open drawings from the 2007 version, I cannot see some of the text. I have tried the following: Checking layers to make sure they are onChecking font to make sure they are availabemaking sure annonotation is visiblemaking sure proxy graphics are onMaking a block of just the drawing objects and opening that I am not that familiar with 2014, so I cannot figure out what is happening. Note - when i look at the drawing in the preview window, I can see the text. But when I open it, it is not there. If I save in 2014, the text no longer shows up in the preview.
View 7 Replies
View Related
May 2, 2012
I need to add toolbars in 2d annotation ???
View 2 Replies
View Related
Jan 9, 2013
I made some toolpallets and i want them to share with my collegas. I know that i can export them amd then import manualy, but is it possible to set the files of the toolbars on the server so if i change anything everybody has the same?
I dont want to import and export them everytime i change something.
View 7 Replies
View Related
Jan 22, 2013
I have just updated to 2013 LT. I want to customize my toolbars to match my old set up but once I've spent ages moving tools to new folders and arranging them how I like it, I close Autocad then open it again and it reverts back to default so all that time editing folders etc is wasted!!
View 2 Replies
View Related
Nov 1, 2012
A client is experiencing a problem whereby when he runs his software,Inventor Professional-Autodesk Product Design Suite 2013, he gets the blurred toolbars as in the attachment.
View 1 Replies
View Related
Jun 26, 2013
I have 1 user who refuses to learn the ribbon and turns every toolbar known to man on.
It has been suggested that I could remove his ACAD.cui (menuload, then unload). Is this the best way to make sure he cannot use them at all and is forced to learn the ribbon?
Another option I have is to simply click the View tab and uncheck the User Interface panel, but he could just as easily turn it back on as soon as I walk away, or even better he could turn on the Menu Bar from the quick access toolbar and add them through the View pulldown menu or just type in CUI and turn toolbars on that way also.
View 9 Replies
View Related
May 9, 2012
We have always made extensive use of File Linking our Autocad (2009) models into 3dsmax. I seem to have found a stability issue when migrating from a Max2012 scene that includes a file linked Autocad file to Max2013.
When you Reload the linked file with 'Show Reload Options' ticked, and then click on the Advanced tab and then on 'Select Layers to include...', Max will crash. It seems to do this every time.
This only seems to happen with Max scenes that have begun in Max2012.
Workstation spec: i7 2700k, 16GB RAM, GTX480, W7x64
View 9 Replies
View Related
Jan 22, 2013
The file are created in AutoCAD 2007.It is a drawing with 2D and 3D drawing in it.When I open this file in my AutoCAD2013 and make the recovery as AutoCAD suggest.
The are no 3D left in the drawing. The file are working fine and whiteout no plebes I AutoCAD2007
System:
Autodesk Product Design Suite Ultimate 2013
AutoCAD Mechanical 2013
View 2 Replies
View Related
Jan 7, 2013
When I first time use AutoCAD 2013, my Properties toolbar can be displayed by right-clicking at the pull-down menu at click on the properties. But now I could not find the properties option anymore after right-clicking at the pull-down menu. get back my properties toolbar displayed in my AutoCAD 2013.
View 6 Replies
View Related
Sep 24, 2012
I finally cleared enough space on my creaky old PC to install 2013 and once again am having trouble with that CUI.
The ribbon is useless to me, partly because it contains nothing relevent (most of the commands I use are legacy) and partly because this creaky PC can't handle it. My usual workspace is set to toolbars (some custom) and menus.
I exported my workspace from 2012 including all the menus and toolbars.
I imported that cuix file into 2013. Everything is there listed as it should be, but when I select the workspace and click apply I have neither toolbars nor menus showing (well I have a tiny toolbar with just new, open and save on it, and another that appears to be related to survey, but none of the ones I want or need.)
What do I have to do to get my menus and toolbars back? they haven't abolished them completely? This PC cannot handle the ribbon and my every request for an upgrade is denied due to politics.
View 1 Replies
View Related
Mar 26, 2013
My place of work recently changed from Autocad 2007 to Autocad 2013 (big jump.. i know), when we try to plot old drawings the .ctb files that were used in 2007 now says missing beside it. We also only have a few options in regards to .ctb files, whereas in older versions we had hundreds to choose from. Any function to get our old .ctb files back or where to download them?
View 1 Replies
View Related
Oct 16, 2012
Every time I open ACA 2013, my toolbars that I have loaded turn off. Well currently only the layers toolbar remains, my custom toolbar and the properties toolbar turn off every time I open ACA with the icon or the exe file itself. If I open a drawing file the toolbars seem to remain. I also just installed the service pack, no change.
View 1 Replies
View Related
Apr 8, 2013
I'm using Cad and i'm trying to get a floorplan drawing into Lightscape 2007. The CAD drawing appears fine when loaded into Lightscape 2012, but because of the project we have to use Lightscape 2007. Unfortunately only parts of the floorplan appear when loaded into Lightscape 2007, I've played around with layers, I've saved it as the earliest version of CAD that I can and nothing works. How to load a CAD drawing into Lightscape 2007?
View 1 Replies
View Related
Oct 19, 2012
I just completed my first topo using Civil3D 2013 (yay!) and now I want to send it to a client. However, when I save it as an ACAD 2007 file and go to open it using ACAD 2007 the spot elevations and all text and symbols associated with them disappear. I can't imagine that you have to have Civil3D to view a Civil3D file. Is there something I can do here?
I did not create a survey database with these points, just imported the .txt file from the field.
View 1 Replies
View Related
May 13, 2013
In my AutoCAD 2014, after selecting a grip on an object or a point it will snap to other grip points even when osnap is turned off. Is there a command or variable to turn what appears to be an auto grip snap function off?
View 8 Replies
View Related
Apr 6, 2013
I'm a student at lone star college in houston, and I'm working on a set of piping plans in autocad 2013. I just downloaded a student version of autocad 2014. I wanted to know if I can work on my plans in both the 2013 and 2014 versions without any hiccups or issues.
View 6 Replies
View Related
Jun 18, 2013
I am having problems opening an idw created in the 2013 version on my inventor professional 2014.
The idw contains its own template, views, dimensions, details and cuts.
Upon opening in 2014 to release details of the scale is changed randomly and the views are out of the leaf.
View 1 Replies
View Related
Jun 11, 2013
i made some 3d modelling in autocad 2014 in the 3d drawing mode but i have some difficulty in modifying the dimensions of the subobjects.
1 method that i already know is to use the scale gizmo which works but not much as i am not able to set the exact dimensions i need. it only scales the subobject according to the previous size.
modify and determine the exact dimensions of the sub-objects.
View 4 Replies
View Related
Oct 3, 2013
each attempt to save as or publish / plot to DWF in Autocad 2014 fails (Device not found) other than the device what am i missing?
tried from the Output tab on the ribbon as well as the application icon save as , publish, and plot all with the same result
View 4 Replies
View Related
Mar 28, 2013
I just installed AutoCAD 2014, but it's not pulling my custom .pgp file, even though the folder that file is in is first in my support path.
System specifications: AutoCAD 2014 64-bit SP1, Windows 7 64-bit SP1, Intel Core i7-2600K, AMD FirePro V4900
16GB RAM, Crucial M4 SSD, 3 Dell Monitors (2 30" 2560x1600 & 1 20" 1200x1600)
View 7 Replies
View Related
May 9, 2013
I've a problema with autocad 2014 when I start it all programs are freezing about a variable period fron 30s at 1min.
With autocad 2013 I don't has problems.
View 2 Replies
View Related
Aug 2, 2013
My instructor taught us to attach images with materials rendering tool to add jpegs to our 3d modelling. Every time I try to use it, it stretches my image to nothing but horizontal lines and despite trying to modify it with the texture editor it eventually colllapses the autocad. Here is my error number. CER_83372936
View 3 Replies
View Related
Apr 10, 2013
do you have a detailed procedure for updating autocad 2013 to 2014?
View 7 Replies
View Related
Oct 10, 2013
can autocad 2014 import inventor ipt files?
View 3 Replies
View Related
Sep 20, 2013
I have problem with compatibility this two versions of civil 3D. Files created in C3D 2013 then modified in 2014 don't want to open in C3D 2013. Files contain many civil objects: shortcuts, corridors. During opening occurs fatal error.
There is no problem with files which were created in C3D 2014 from the begining only modified in C3D 2014.
View 6 Replies
View Related
Dec 12, 2013
I'm running AutoCAD 2014 (part of AutoCAD Structural Detailing 2014), & it occasionally freezes on me. I haven't figured out how to reproduce it regularly yet, but it is somewhat predictable. When I run a list routine that opens a dialog box, if I press Escape immediately after the dialog box appears, AutoCAD quits responding & I have to force it to close with the task manager. It doesn't always happen, but it has become a semi-regular event. I've previously used AutoCAD 2010 Mechanical & AutoCAD 2012 (part of Structural Detailing 2012) before with the same routines on this machine with no issue.
Computer Specs:
Dell Inspiron 560
Windows 7 Professional x64
Pentium E6700 3.2 GHz
4GB RAM
NVidia GeForce 8400GS
AutoCAD 2014 doesn't seem to be noticably more resource intensive than 2012 was, so I don't think that's my issue. I'm just trying to make a habit of saving more often & not accidentally running the wrong command.
View 5 Replies
View Related
Jul 8, 2013
to open two or more files in autocad 2014
becomes very slow to use?
zooming is slow?
why this happens?
View 7 Replies
View Related
