I am using autocad lt 2010..I am labeling items in my drawings and the text looks different in some of the leaders. When i check the properties both leaders have all the same properties that i feel are relevant.
View 9 RepliesI would like to try and set up a Multileader that reads the description of a block.
For example when I am making the block I would like to put some descriptive text that may say "Post top insert connected to haboe pin"
After the block is compelted and placed into a new drawing I would then select the multi leader option and then it would automtically fill in the text. (from the pre-defined description)
I would like it to be similar to a callout in solidworks.
I was under the impression that you could search mult ileader text with quick select, but 'contents' or some variant does not seem to be an option.
Tell me the easiest way to find a multileader with specific text (including the wildcard)? I expect it can be done with quick select or filter but can't get it happening.
I have multiple closed areas that i want to show the sq ft. Now i use the command multileader then click to insert a feild.
Select object then area. Now i have a leader with text. Can i extract the text to a table or spreadsheet. Or approach this differently. I use autocad lt 12
I am trying to circle one of the letters and each will receive a number sequence afterwards for the comm addresses (is what I want to do anyway). This is a gov project so I have to ensure everything is addressed properly.
Circling the prefix would make this look ideal but I don't know if there's a way to do it. I tried looking but couldn't find a way to do it.
The only way I could think to do it is do it manually with attdef and create a defined block with the prefix area already circled.
I'm fairly new to AutoCAD, and most certainly to the forum [URL]......
I have a question in regards to using Multileader text. Tolerance.jpg
The guy who used to work here made this text with a tolerance to a radius measurement. The tolerance is smaller ( no problem with that), but also adjusted to the top of the line.
I have a dwg template that has a Multileader Style that uses Annotative text. When I changed a viewport to a different scale....from 1"=1' to 3/4" =1', the text is not appearing to scale. It's very large. The Mtext changed to the correct scale but not the Multileader text. Where do I need to make a change?
View 5 Replies View RelatedI'm snapping to the corners of my multileader text boxes. OSNAPNODELEGACY is set to 1 and I'm not snapping to regular text or mtext. How can I change this behavior for the multileader text?
View 6 Replies View RelatedI'm looking for a way to convert leader and text that is separate into a multileader where the text is attached to the leader. We just updated to new standards using the multileader and all the old stuff is not attached.
I'm using AutoCad 2009.
When I try to create a multileader the text size is throwing me off. I draw the arrowhead location and landing with no problem, then the text box pops up. As I am typing the text into the textbox it shows up on the screen as if it was a text height of about 5, however it is actually 0.18. As soon as I click off the text box to complete the multileader the text shrinks down to the actual size of 0.18.
I want the height to be 5 but when I change it to 5 the text box shows up as huge, like it is about 200 or something even though it is actual 5. The textbox takes up most of the screen, as soon as I click of the text box to complete the multileader it shows up as a normal height of 5 and looks correct. This is so annoying. Multileader is the only tool that does this. A simple multiline text box works fine; as I am entering the text it is the same size the entire time, visually and actually.
I have noticed on several drawings that the multileaders change themselves when the drawing is closed and opened again. I put the multileaders in, they look fine, and when I close and open the drawing the multileader has extended itself across my text. If I edit it it fixes itself but it 'breaks' itself again once I close and open.
View 2 Replies View RelatedUsing Autocad 2014 and would like away to put a vertical line at the text where the leader meets it. Is this a setting that I'm missing or might there be a Lisp routine to get it? See the attached jpeg.
View 6 Replies View RelatedI am just wondering how is possible to set up a Multileader style that creates text with a background mask.
I have been trying to get this feature in the Multileader style manager and I could not find it in order to avoid to set up background mask every time I create a Multileader
I use LT 2010 and have defined a multileader style which is annontative. When i use this each time i have to make he text annotative and set the height even though it uses the right annotative text style.
View 2 Replies View RelatedI don't normally deal with multileaders with text although a drawing I have has been done with these.
The leader is justified to the left of the text. If I drag the position of the leader head to the right hand side of the text, the leader still starts from the left hand side of the text (goes at the bottom of the text) so how would I justify the leader position of a multileader to the right hand side of the text?
I had a quick look in the properties pane earlier although am fairly busy and it is only a trivial issue.
I have a Multileader Style and have the Mtext to come in with "Underline top line". The text sits right where I want such as EXIST. 24 RCP but when I enter something with an inch or foot symbol such as EXIST. 24" RCP the text will end up sitting right on the leader line. I don't see where I can set an offset for the Mtext coming in with the leader. What can I do to make this change?
View 4 Replies View RelatedActually We are trying AutoCAD 2010 and i have a question about multileader i cannot find in the manual.we are used to set a bright background mask under our text (including Mtext, Qleader, Dimensions) this way the printed text can be seen much better in dark area.
Now i'm am upgrading from AutoCAD 2007 and discovering Multileader (and i cannot find the Qleader button on the ribbon) so i conclude the new "standard is multileader", this is annoying because i cannot find anywhere how to put text mask background inside text in mleader. any option available? i would like to begin to use this function, but the text background is mandatory here.
I have recently converted mtext to multileader text & i thought it was causing some issues but now im not so sure. Some of my users are experiencing a long time to regen & it has caused some peoples computers to freeze up. Is there a setting or a variable that could be causing this? I am not sure if this is an issue with the multileaders or with autocad release 13 or 14 in general. I had the users turn regenauto off until i can find a solution.
View 3 Replies View RelatedI would like to use the entmod method to rotate the text in a Multileader object. Reading the DXF code tells me the dotted pair of 42 seems to be the rotation angle, but entmoding that does nothing. Obviously I don't know how to modify this complex object.
View 3 Replies View RelatedI'm looking for a lisp routine that can find and replace multileader text.
I want to replace "T." with "T+" and "B." with "B+".
All the multileaders are on layers with a suffix of "-elev".
I'm setting up styles and trying to play spot-the-difference; I can't see any difference between these three settings.
View 9 Replies View RelatedMA.JPG
why i can't not match properties (MP) multileader texts, as you can see on the pic, i want the Mleader text on the right to be the same size as on the left, they are in the same layer, same mleader style but when click MP to match with the one on the left, nothing happen?
how to set the overall scale of a multileader? I have set the .Scale property, but that seems to have done nothing.
MleaderStyle.Annotative = AnnotativeStates.False MleaderStyle.LeaderLineType = LeaderType.StraightLeader MleaderStyle.ArrowSize = Me.ArrowHeadSize MleaderStyle.BreakSize = Me.DimensionBreak MleaderStyle.DoglegLength =
[Code]...
I have created a 1/4" DIM style and everything is how I want it to look except my leader function. When I go to use the leader it is grossly out of scale ( much smaller than I want) and it uses a different text than that of what I set in the style.
View 5 Replies View RelatedIn the samples of the multileader in the help box, the frames around the text are circular. When I insert a multileader, it has a square frame and I cannot find where to change that.
View 3 Replies View RelatedI'm using multileader overall scale to define ml. types for different drawing scales. For example ml. style 1_10 uses overall scale 10 and 1_20 uses overall scale 20.
When i select the ml. and change its style from 1_10 to 1_20 it also changes the overall scale to 20 which is ok.
Thing is that if i want to change it back from 1_20 to 1_10 (or something else) it only changes the dimstyle and not the overall scale(text height).
Apart from FLATTEN, is there a way to change the Z coordinates of an MLEADER to stop the text from appearing bold.
FLATTEN explodes the MLEADER & is thus not suitable for this.
One of the things about Mtext that I really like is to dynamically adjust the text box size. I don't seem to be able to do this when using the multileader with the Mtext. The Mtext when selected with the Multileader acts like the single line text where I have to manually insert returns.
View 9 Replies View RelatedI created a Multileader style in AutoCAD LT 2011 that worked pretty good. Basically a keynote callout with a tick on one end and a circle on the other end. After using AutoCAD LT 2012 it was noticed that there was a small dot in all the circles. It seems that if your Multileader type is set to "block", your source block is set to, whatever (triangle, circle, etc...), and most importantly, if your attachment is set to "Insertion Point", a very small dot is placed in the insertion point. It prints as well. When the same drawing is opened with AutoCAD LT 2011, the problem disappears.
View 6 Replies View Relatedsomehow one of my colleges managed to explode all multileaders in several drawings. Is it possible to re-create a multileader from an MText and a Line? Editing the text and re-adjusting the lines consumes far too much time...
View 1 Replies View RelatedTrying to create a multileader callout that doesn't have a landing and the leader axis passes through the center of the ballon circle and not the side. Most the CAD applications I have worked with don't use leaders with "Landings".
View 3 Replies View Related