AutoCAD LT :: 2012 Multileader Now Has Dots Appear In It
Apr 5, 2011
I created a Multileader style in AutoCAD LT 2011 that worked pretty good. Basically a keynote callout with a tick on one end and a circle on the other end. After using AutoCAD LT 2012 it was noticed that there was a small dot in all the circles. It seems that if your Multileader type is set to "block", your source block is set to, whatever (triangle, circle, etc...), and most importantly, if your attachment is set to "Insertion Point", a very small dot is placed in the insertion point. It prints as well. When the same drawing is opened with AutoCAD LT 2011, the problem disappears.
View 6 Replies
ADVERTISEMENT
Jul 12, 2012
I created a Multileader style in AutoCAD LT 2011 that duplicated our Architectural firms standards from previous versions. Pretty simple. The problem is, when utilized using AutoCAD LT 2012, AutoCAD LT 2013, AutoCAD 2012, or AutoCAD 2013, a small dot appears in the keynote bubble. (it also plots) Workarounds include checking “Automatically include landing” and/or changing “Content – Insertion point” to “Content – Center Extents”, in the “Modify Multileader Styles” dialogue. Both unacceptable per our office standards. Tough being 2 versions of AutoCAD behind office wide, because of such a minor bug but our keynoting has looked the same since 1992 and I really thought it would have been fixed since posting after the release of 2012.
Attached is a .dwg or you can follow these instructions. Start a new drawing, go in to “Annotate”, Click “Leaders”, hit “new”. Name it whatever you like, I’ve named mine “Test”. Under “Leader Structure”, uncheck “Automatically include landing”. Under “Content” change “Multileader type:” to “Block”, “Source block” to “Circle”(this setting can be set to anything), and “Attachment:” to “insertion point”. Hit “O.K.”, highlight your newly created Multileader style, hit “Set Current”, and close out. Test your new multileader style and notice the dot.
View 2 Replies
View Related
Nov 21, 2011
In 2010, when you did a multileader, on the landing you had an arrow grip on both ends and then the box grip in the middle.. Now in 2012 they have the landing set to where there is an arrow grip at one end closest to the text and the box grip at the other end....
Is there any way to set the multileader grips on the landing in 2012 the way they were set up in 2010?
View 2 Replies
View Related
Apr 3, 2006
what Im looking and seen it around other places is like an outer glow but instead of a glow its dots where the dots closest to the object are large and close together and as they move out they get smaller and further apart...
View 8 Replies
View Related
Mar 21, 2011
how to set the overall scale of a multileader? I have set the .Scale property, but that seems to have done nothing.
MleaderStyle.Annotative = AnnotativeStates.False MleaderStyle.LeaderLineType = LeaderType.StraightLeader MleaderStyle.ArrowSize = Me.ArrowHeadSize MleaderStyle.BreakSize = Me.DimensionBreak MleaderStyle.DoglegLength =
[Code]...
View 9 Replies
View Related
Aug 24, 2012
I am using autocad lt 2010..I am labeling items in my drawings and the text looks different in some of the leaders. When i check the properties both leaders have all the same properties that i feel are relevant.
View 9 Replies
View Related
Aug 6, 2012
I have created a 1/4" DIM style and everything is how I want it to look except my leader function. When I go to use the leader it is grossly out of scale ( much smaller than I want) and it uses a different text than that of what I set in the style.
View 5 Replies
View Related
Jun 27, 2007
In the samples of the multileader in the help box, the frames around the text are circular. When I insert a multileader, it has a square frame and I cannot find where to change that.
View 3 Replies
View Related
Jul 24, 2013
I'm using multileader overall scale to define ml. types for different drawing scales. For example ml. style 1_10 uses overall scale 10 and 1_20 uses overall scale 20.
When i select the ml. and change its style from 1_10 to 1_20 it also changes the overall scale to 20 which is ok.
Thing is that if i want to change it back from 1_20 to 1_10 (or something else) it only changes the dimstyle and not the overall scale(text height).
View 9 Replies
View Related
Sep 16, 2013
Apart from FLATTEN, is there a way to change the Z coordinates of an MLEADER to stop the text from appearing bold.
FLATTEN explodes the MLEADER & is thus not suitable for this.
View 9 Replies
View Related
Apr 9, 2011
One of the things about Mtext that I really like is to dynamically adjust the text box size. I don't seem to be able to do this when using the multileader with the Mtext. The Mtext when selected with the Multileader acts like the single line text where I have to manually insert returns.
View 9 Replies
View Related
Aug 17, 2009
I would like to try and set up a Multileader that reads the description of a block.
For example when I am making the block I would like to put some descriptive text that may say "Post top insert connected to haboe pin"
After the block is compelted and placed into a new drawing I would then select the multi leader option and then it would automtically fill in the text. (from the pre-defined description)
I would like it to be similar to a callout in solidworks.
View 9 Replies
View Related
Apr 30, 2012
I was under the impression that you could search mult ileader text with quick select, but 'contents' or some variant does not seem to be an option.
Tell me the easiest way to find a multileader with specific text (including the wildcard)? I expect it can be done with quick select or filter but can't get it happening.
View 2 Replies
View Related
Feb 7, 2013
somehow one of my colleges managed to explode all multileaders in several drawings. Is it possible to re-create a multileader from an MText and a Line? Editing the text and re-adjusting the lines consumes far too much time...
View 1 Replies
View Related
Mar 2, 2012
Trying to create a multileader callout that doesn't have a landing and the leader axis passes through the center of the ballon circle and not the side. Most the CAD applications I have worked with don't use leaders with "Landings".
View 3 Replies
View Related
Jan 21, 2012
I have multiple closed areas that i want to show the sq ft. Now i use the command multileader then click to insert a feild.
Select object then area. Now i have a leader with text. Can i extract the text to a table or spreadsheet. Or approach this differently. I use autocad lt 12
View 3 Replies
View Related
Dec 5, 2012
I am trying to circle one of the letters and each will receive a number sequence afterwards for the comm addresses (is what I want to do anyway). This is a gov project so I have to ensure everything is addressed properly.
Circling the prefix would make this look ideal but I don't know if there's a way to do it. I tried looking but couldn't find a way to do it.
The only way I could think to do it is do it manually with attdef and create a defined block with the prefix area already circled.
View 9 Replies
View Related
Dec 2, 2012
I have several multileaders and they appear reversed and also print that way.
So I tried to modify the `standard` text style (which they use) to be 'backward' and changed the font from truetype to shx. I see no change in the existing multileaders.
View 4 Replies
View Related
Mar 23, 2011
I'm fairly new to AutoCAD, and most certainly to the forum [URL]......
I have a question in regards to using Multileader text. Tolerance.jpg
The guy who used to work here made this text with a tolerance to a radius measurement. The tolerance is smaller ( no problem with that), but also adjusted to the top of the line.
View 3 Replies
View Related
Dec 22, 2010
I have a hatch Pattern 'DOTS' (A default AutoCAD Pattern) filled in an area in my drawing. The layer is plottable. The pattern is in proper scale (I have attached a screen shot). Now, when I publish a PDF, though it shows up in the preview, it is missing in the pdf.
View 9 Replies
View Related
Jun 24, 2013
Working with AutoCAD 2012:
I have a solid object whose layer I make transparent. It is transparent, but it leaves little grey dots in model space and paper space. Dot size and spacing doesnt' change when I zoom in and out.
6-24-2013 12-39-54 PM.png
This is a new machine (Windows 7) and it never happened on my old machine (Windows XP). I want the dots to go away.
Here is the DWG file: Drawing1.dwg
View 3 Replies
View Related
Sep 26, 2012
I try to make a linetype which contains only plus sign. (+ + + + + + + +)
*EMRE,artı S,0,-0.5,[EMRE,C:UsersuserDesktopplusemre,y=.06788,s=.3 33333],-.5
But, there is a dot at start and end points of (+) sign. result is like this; (.+ .+ .+ .+ .+ .+ .+ .+ .+ .+) of course dots are smaller. so is there any way to remove that annoying dots from my linetype?
View 9 Replies
View Related
Jun 21, 2012
I have the text style set to match text orientation to layout and it works, but when I use the same text style in mulitleader the text doesn't rotate with the layout 2013 Civil 3D
View 9 Replies
View Related
Jul 11, 2011
I have a dwg template that has a Multileader Style that uses Annotative text. When I changed a viewport to a different scale....from 1"=1' to 3/4" =1', the text is not appearing to scale. It's very large. The Mtext changed to the correct scale but not the Multileader text. Where do I need to make a change?
View 5 Replies
View Related
May 2, 2013
I have some new multi leader definitions using blocks, however I can only edit the attribute definition text individually, where if I had the same block as a standalone with a leader I could select as many blocks as I wanted and change the text via quick properties in one quick step. Is there a way to achieve this using a block as a base for a multileader?
View 2 Replies
View Related
Jul 30, 2012
Is there a way to set the Multileader scale for DIMSCALE when it is on the tool palette like you are able to do with every other block? Maybe a lisp routine so set the Multileader style and to dimscale?
View 4 Replies
View Related
Nov 28, 2012
I'm snapping to the corners of my multileader text boxes. OSNAPNODELEGACY is set to 1 and I'm not snapping to regular text or mtext. How can I change this behavior for the multileader text?
View 6 Replies
View Related
Feb 10, 2010
I've created tags with text below them. The text is a multline attribute. I save the block with the background mask on.
When I add these blocks to multileader styles, that setting is lost and even after creating a multileader, editing the multiline attribute and turning the mask back on, the setting will not save for some reason.
One very noticeable affect of losing the background mask is that when one is editing the multiline attribute AutoCAD leaves the original text visible and overlaying the text that is updating. This makes it nearly impossible to see the edits one is making. One has to set the background mask every time they edit that multileader if they need to change the text in the mutliline attribute.
Using AutoCAD LT 2010.
View 5 Replies
View Related
Jun 4, 2012
At a multileader when "automatically include landing" is set to "NO" or unchecked, then a small point (like that at the end of a dimension line) is inserted in the callout block, such as the circle, which then prints. This makes for less than clean drafting to say the least--is this normal? If so, (why?!), is there any way to NOT have those points print/show up?
View 7 Replies
View Related
Aug 8, 2012
we have DWG files with multi leader lines, we would like to save these files to an earlier release so that others could access, what would be the earliest date recommended.
View 3 Replies
View Related
May 30, 2013
Is this a desired behavior on a multileader? URL....
Seems to do it for anything that is not left aligned. I think it was present in 2013 as well. I use multileaders for annotations a lot since it is easier to use them with the background masks and borders than mtexts.
View 5 Replies
View Related
