Working with AutoCAD 2012:
I have a solid object whose layer I make transparent. It is transparent, but it leaves little grey dots in model space and paper space. Dot size and spacing doesnt' change when I zoom in and out.
6-24-2013 12-39-54 PM.png
This is a new machine (Windows 7) and it never happened on my old machine (Windows XP). I want the dots to go away.
Here is the DWG file: Drawing1.dwg
How can I remove the lines in the middle after I press and pull the objects.
Attached is the Untitle.jpg, to make more clearer to you. Blue is the wall and skyblue is the aquarium. I want the back and the front of the aquarium don't have any line in the middle but even I do shade command the fill of the color is still there. Cause if I explode and delete the line in the middle the colors that fill the aquarium are getting rid off See Untitled 2.Jpg to see what I mean. And also how can make the aquarium Untitle 3.jpg transparent?
I have created this rendering and for some reason the metal plate which is supposed to be non-transparent is showing up with some transparency.
I'm using the diamond plate material that comes with AutoCAD. There is no transparency setting with this material so I can't set it to non-transparent. Short of trying some different materials, I was thinking there must be some way of resolving this.
I am currently working on an assembly and want to view it as an isometric view, but, I want to see parts behind a particular object. My question, Is there a way to change the transparency of one object without changing the effects of the other parts? I want to be able to see the front object as well as the one behind it.
View 3 Replies View RelatedLately I've been trying to plot a drawing with solid hatches of varying transparencies to pdf in Autocad 2011. I have plotted drawings like this successfully before, but with this particular document, the hatches are being rendered with a strange texture of horizontal lines as if printed by an inkjet printer running low on ink. An example is attached - all hatches should be smooth.
zone sections.pdf
I have experimented with some variables and found that it only happens when the layers containing these hatches have any value for transparency other than 0, regardless of whether they overlap.
I've tried copying just the lines and hatches shown in the attachment to a separate dwg and the result is the same.
I have a set of scanned drawings that they wanted marked up via AutoCAD to use for submittals. I made a nice check mark for all the "good" dimensions using a solid green hatch (which plots as green).
I brought the scanned drawings in as xref TIFFs and put my autocad objects over them. Problem is that when I go to PDF them, the check marks are transparent and I really don't want them to be. I've never messed with any transparency settings in our CAD and I've only noticed this issue when printing over top of images.
This is in Carlson 2014 BTW.
what Im looking and seen it around other places is like an outer glow but instead of a glow its dots where the dots closest to the object are large and close together and as they move out they get smaller and further apart...
View 8 Replies View RelatedIs there a way to overlay a transparent background png image on a solid or mesh that already has a material assigned? i.e. a chrome object with a decal applied. I have tried creating a new material using my png file as the image but have not been able to overlay it on an object where I want to see the material underneath.
View 1 Replies View RelatedI'm trying to make an image I have which has a solid background (and a few other details inside it) transparent? so I can still see behind the graphics in the image yet the background at the same time... I know I've seen it before where the image sort of floats above the background... But I don't know how to accomplish this in Photoshop.
View 8 Replies View RelatedI'm working on a project, and all of a sudden when I ad a outline line width to an object the outline seems transparent to me. I can get it to stop doing this with copying other objects in the scene that have a solid line around them, but as soon as I go back to the other items the transparent line width starts happening again.
View 2 Replies View RelatedIn other words, I have a green patterned background, and I want to add a transparent triangle (which should then be the green background by making it transparent) over a white layer. To sum it up, I want the triangle to be filled in with the green patterned background over the white layer. How do I do this?
View 6 Replies View RelatedI am in the process of designing a clear label for my aftershave and would like to have the text on a solid color panel be transparent so that the liquid is visible. I would also like to have an outline (Line) tracing the font. I've been doing some internet searches for "punched out" and "cutout" text and the like but this process is using two solid color layers.
As it stands now, I have a transparent background, the panel as one layer, and the text as another layer on top of the panel.
I came across a process for Illustrator but was hoping that it could be done in Photoshop as well since I have everything already setup in PS. I did try the method described for Illustrator but I couldn't get it to work in PS...not throwing out the high percentage of operator error on this one.
I'm having technical issues with Photoshop CC, it is displaying solid fill layers as transparent, even though they are showing up correctly as solid fill layers in the layers panel.
View 5 Replies View RelatedI want to take a photograph and have it go from transparent to solid opacity. I believe the gradient tool can do that (maybe) but I don't want any color, just have the transparent blend to solid.
View 3 Replies View RelatedI am trying to use Pathfinder>Minus front to create transparent rays over text outlines, but am having trouble. how it should appear: URL.. It's nearly exactly how I'd like it to look but i just want it so that when I put the graphic on an image the rays don't show up as white but are instead transparent.
View 2 Replies View Relatedhow to change 'solid color background" image to Transparent?
View 4 Replies View RelatedI have been trying how to figure out how to make the center if an object transparent with color gradually appearing on the borders. The transarency tool insists on starting with a solid color in the center. If using a square as an example, how do I make the center transparent with the edges graduating to a solid color?
View 5 Replies View RelatedI have been working with Xara for two days now, and it's great! I am using the trial version of Xara Photo & Graphic Designer 9. I created a file with a couple of transparent shapes (love the transparency tool - so easy!), and it looked great. I exported to .pdf, and the transparent gradient was all gone. The shapes are there, but have no gradient whatsoever.
I also exported it as a .jpg and the gradients are present in the .jpg. In other words, the .xar file looks great and the .jpg looks great. Just the .pdf doesn't work.
I post a picture of the coins and needt to cut around edges... usually wand does get it all and it is time consuming to finish it..
View 4 Replies View RelatedI'm making some buttons for a game I'm making. The game has several themes you can switch to. I tried to make a gray button, and then add the theme gradient/image on top, but the semi-transparent parts of the button became solid.
View 2 Replies View RelatedI want to create a transparent text on a solid color background, and I need text transparency to go all the way to through the image (i.e. do not show the solid color background). I have the transparent background layer, the solid rectangle layer that occupies part of the image, and the text layer (with text element) on the top of the solid rectangle layer. How do I make text transparency to go all the way through? Here is a similar example for Photoshop CS, only in my case, the background layer is transparent (i.e. there is no picture): URL... Basically, I need to make the letters see through, so they show the background color on which the image will be placed. Is it possible to do in Photoshop Elements? I'm using version 9 on Windows 7.
View 11 Replies View RelatedI have a multilayered psd file. All layers should remain opaque except the black to white gradient layer where I need the white to be transparent. So that when I place the final psd on top of a block of solid colour in Indesign the gradient shows the background colour through where the black fades off.
View 4 Replies View RelatedI have a solid green rectangle.
I would like to create several similar green rectangles at various levels of transparency that will perfectly match the color of the solid green rectangle. Is there an easy way to do this?
I have tried matching it by eye, and can get very close:
the original solid green rectangle is R:135 G: 174 B: 155
after making a copy of the solid green rectangle, say, 90% transparent, I can play with Hue/Saturation to get around R:136 G:175 B: 154, according to the eyedropper. But I don't see any way of fine tuning the RGB/HSB/etc. absolute values in the transparent version.
We have this need to have all of the solids in a drawing to be placed in the "solid" layer.
Sometimes folks are drafting lines to develop these solids, and keeping the lines on the "solid" layer, rather than moving them to another layer, or deleting them altogether.
I could get folks to run this command before leaving the drawing.
I'm thinking something along the lines of:
Select all entities that are on the solids layer that are not solids.
If nil, great, do nothing.
If entities are selected, let me do something with them.
I'm hoping the following can be modified ever so slightly.
(setq non_solid (ssget "X" (list (cons 0 "3DSOLID")(cons 8 "solid"))))
I'm trying to split a single solid body into 2 solid bodies. The problem is that the body I'm trying to split consists of two separate pieces. I can split a body when it is a single piece no problem, but I'm having the problem when the two pieces are not joined at all.
When I try and split it on the origin plane it gives this error:
"Creating parting line failed. Could not build this Split"
When I try and split it on a work plane lying on one of the pieces it gives this error:
"Creating parting line failed. Modeling failure in ASM. Redefine inputs."
Or, another variation on this erorr:
"Creating parting line failed. Split feature could not create two bodies. Change the Split Tool so that split feature can create two bodies."
I have a.3ds file imported into Civil 3d. The object imported as a polymesh in Civil 3d. I need the solid 3d object to do some edit like slice or union and subtract.
The question is "How can I import .3ds into Civil 3d as a solid objects or hoe can i convert polymesh to solid?"
I have finally created the shell of the complex surface that you see. This is only a section of the part because I cannot show the whole thing for proprietary reasons. I formed solid surfaces using the network command. The propblem is that it will not convert to a solid because the surface seams are not "water tight." When the network command created the solid surfaces, the surface seams do not exactly match the lines so there are gaps in all the seams. I have tried blending, patching, etc. and nothing works. how to convert this to a solid without losing the outlines and the shape?
View 3 Replies View RelatedIs it possible to trim a 3d solid using another 3d solid as a cutting edge? I want to cut the edges of a dam using the natural ground surface (which is also a solid) as my cutting edge.
View 3 Replies View RelatedIs there away to trim the diagonal 3d solid to the top of the horizontal 3d solid in the picture.
View 4 Replies View RelatedI am making a design on inventor 2013 for a colleague who does not know how to use the inventor.
I want to make the solid and then set something up that allows the user to change a few of the parameters of the solid in a very user friendly way (i.e. a box that says "cylinder radius" and has an input box so the user can enter a value).
i am having a hatching issue, it seems no matter what hatch pattern i use and what hatch scale, alot of the hatch looks solid instead of the pattern i want, for example i am using currently ANSI37 @ Annotative with a scale of .20 and on the same paperspace page one plan with the hatch shows the cross hatching and the other one below looks solid (see attached) now i can go and say change the hatch scale and it reverts to the cross hatching, but then when i zoom out it goes back to "solid" is it a graphical issue?
View 7 Replies View Related