Since I installed 2010, I noticed that OSNAP seems to want to snap to objects in model space that are outside of the viewport while I am in paper space. It seems to only happen with polygonal viewports.
View 7 RepliesI'd like to know how to align an object in model space with the edge of my viewport in paperspace.
When I draw, I like to lay out multiple complete drawings in model space, make an appropriately scaled bounding box around them, and then snap a view port to the bounding box in my layout. I usually have multiple drawings lined up in a row in modelspace, so when I want a new layout I do a Save As and then pan around in my viewport to find the next bounding box, at which point I have to resize the viewport to get it to snap to the edges nicely. I really want to be able to to it the otehr way around- while panning I'd like to be able to grab a corner of my modelspace bouding box and snap it to the the corresponding corner of my viewport window. That way making new layouts would be a snap. Is there a way to do this in AutoCAD 2012 LT?
I have a floor plan xreffed into model space, visretain=1 and i can see the room numbers. I switch to paperspace and go to layer properties and highlight all layers and then turn on all layers in he drawing and thaw in all three columns and still the room numbers do not show. The layer listed in model space is on and thawed. Why won't it show?
View 2 Replies View RelatedFor a while I've been using Wipeout in paperspace to surround the title block in order for the underlying modelspace objects not to shine through. Suddenly this doesn't work anymore - i.e. modelspace objects are visible no matter what. I've been playing around with the bring to front / send to back commands, but to no avail. I
View 8 Replies View Related In the plot dialog box the options Plot paperspace last and Hide paperspace objects are only supposed to be available in Paperspace however they show up as checked in some of our drawings when plotting from Modelspace. They should be greyed out then. (see attached) If I copy/paste all objects into a new drawing everything is fine. If I delete all layout tabs the options are still checked when plotting in model space.
The only thing I can figure is there are paperspace entities in my model space or that somehow paperspace is leaking through into modelspace.
Is there a way to see and move paperspace viewport boundaries in model space?
Explaining: You have created layout which includes multiple viewports with different scale and size (view, section). Now you copy the layout to create a new layout with with same viewports. Now you have to change the view in all viewports. I have used technique where you double-click in viewport and you navigate in modelspace (pan/zoom) until you reach the right position.
The problem is If you have like 100 layouts with 10 viewports each, it takes very long time to pan the views into right position.
I have a some theories:
1. If I could see the viewports in modelspace, I could drag them all into right position without navigating them one-by-on in paperspace.
2. If I could pan the view in viewport by specific amount lets say 10m to the right.
My drawings are setup with these settings:
LTSCALE = 1
PSLTSCALE = 1
CELTSCALE = 1
When I draw a line with linetype GAS then it is NON-READABLE in the modelspace, or I have to zoom in very deep. In a viewport, no matter what scale, it is exactly as I want it. Also if the VP is 1:100 or 1:50, the lines look the same in the layouts VP.
The results (what is printed on paper) are good, so that should remain as is.
How should I use / modify these settings (or my way of working) so that the lines are drawn READABLE in modelspace without having to zoom, and that the lines in the viewports (thus on paper) remain readable also.
I have a drawing I'm working from where everything was drawn in model space including the drawing titleblock and the grips for an archD plot. A single viewport is used in paper space that encompasses the entire drawing - titleblock and all. My problem is that I want to use a different scale in the paperspace layout but keep the titleblock (and archD plot grips). Adding another paperspace viewport in the centre of the original does not seem to work as when I adjust the viewport scale it zooms in far too much. Is there a simple solution that I am missing?
View 9 Replies View RelatedIs there a way to have text that is in paperspace print under objects that are in model space? like a watermark .
View 2 Replies View RelatedIs there a way to align a modelspace rectangle to viewport extents in paperspace? My situation is that I have several page 'layouts' (complete with paper size boundaries and title blocks) drawn in 2D modelspace, as this is how I have been plotting up until now. I am trying to set up these 'layouts' in actual paperspace Layout Tabs for batch processing, and I would like a way to position my view within a viewport so that the recatngle that I have drawn in modelspace snaps to the viewport extents. I am sure this is a 'day1' type of question, but I'm very new to paperspace Layouts.
View 4 Replies View RelatedI have this drawing that I just finished. There were a few dotted lines that were showing up correctly in model space. Then, when I switched over to paper space all of those lines were solid. I messed around with the option LTSCALE and set it to 0.01. This made the lines show up correctly in paper space, but now they are all messed up in model space. Is there an option to make it so they show up exactly the same in both model and paper space?
View 9 Replies View RelatedIn modelspace, architectural schematic plans sections elevations which, when viewported into paperspace drawings, are scaled to 1:100. I therefore work in modelspace with Current object scale = 1, global scale factor = 100. This makes dashed lines etc reproduce at legible scale in a drawing at 1:100.
What about when I move on to details, which in paperspace are scaled to 1:5? At present I start a new file with Current object scale = 1, global scale factor = 5. This makes dashed lines etc reproduce at legible scale in a drawing at 1:5.
Isn't there a way to achieve this, while keeping both the schematic and the detail drawings in modelspace on the same, single file?
Even the above system fails when I want to scale one elevation of the schematics at 1:50, or foundation details at 1:10.
I have just upgraded to 2013 from 2012. When dimensioning my viewports in paperspace, I will snap using the linear or aligned dimension and it will appear to snap to the first point, but when I snap on the other end, it will go somewhere way off the viewport or give me a "0" dim.
View 1 Replies View Relatedi am trying to translate a Point coordinates from Paperspce to world coordinates in model space.The code i used in Land2006 worked OK but now in Civil3d 2012 it doesn't!
Private Sub GetPlais_Click()
Dim tmpnt1 As Variant, tmpnt2 As Variant, tmpPnt1 As Variant
Dim lole(0 To 2) As Double, upri(0 To 2) As Double
Dim returnobj As AcadObject
FrmGrid3.Hide
On Error GoTo Eline
ThisDrawing.Utility.GetEntity returnobj, tmpPnt1, "ÅðÝëåîå ôï ViewPort ðïõ èá äçìéïõñãçèåß ï êÜíáâïò!"
If TypeOf returnobj Is IAcadPViewport Then
[code]........
If the 2D layout is updated I need to move featurelines and gradings to the new locations without changing their Z values. It seems OSNAPZ is supposed to serve this purpose but it's not working for me. I have OSNAPZ=1 and ELEV=0 but when I snap a featureline vertex to the 2D linework the vertex ends up at elevation zero. How do I make this work?
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
I have a project where 60 drawings will be duplicated for each of a dozen sites. Each site has a four digit prefix (i.e. 800X) that is added to the drawing number, equipment callouts, leaders and various notes throughout the sheets. Even using Find/Replace, this is a lot of work to revise every time I copy them, so I’m thinking that this is a job for fields, no?
Well, I had no problem making a “global” field called SiteNo and inserting it into the title block. Then I inserted the same field into a couple of references in the general notes as well, where it works fine. But when I put it into several leaders sprinkled throughout the drawing I found a problem: regen or regen all will update the title block and note references (all in paperspace, of course), but not the ones in model space. I’ve tried putting the field in both mtext and dtext, and I’ve checked to be sure FIELDEVAL is set to 31. Nothing makes fields in modelspace update.
But I know that the field is set up correctly. If I doubleclick any modelspace occurance (text or mleader), then right click and choose “update field”, it fills in the right value. This however negates my goal. If I have to select each one, I might as well put it in as text and use FIND/REPLACE on each individual drawing.
I was REALLY hoping that I could go to the properties of the sheet set, change one box, and see all occurrences in all drawings for that site update, which is my understanding of the purpose and power of fields. I've spent a lot of time searching the web, seen a lot of issues and solutions, but nothing that quite hits my problem.
The AutoCAD deadline-sensor is working well this week as this Project near completion.
The closer we get to the deadline, the more AutoCAD slows down.
My UCS Icon has disappeared from Modelspace.
It's were it belongs in Paperspace.
The USC Icon is set to "Noorigin" and the color is set to RED for Modelspace.
I need it to orient the many angled spaces we have in this Plan.
I'm having a little problem with the modelspace in a vport disappearing on me.
I am trying to do some B.O.M. work, and sometimes I can't snap to a particular point/object, so I turn osnap off and zoom in to identify the correct object. After a certain point in the zoom the drawing regens and then the modelspace disappears completely.
I tried a regenall, closing the drawing and starting it up again, but it's still not there. I checked the properties and it still says it's a vport. When I double click it to enter modelspace from the vport it doesn't take me into modelspace.
I've checked my maxactvp, that's maxed out at 64. I've run an audit and that didn't work.
AutoCAD Civil 3D 2011 32-bit
Win XP Pro SP3
Dual Core, 4 GB of RAM
NVIDIA Quadro FX3700
I asked this a long time ago but I'm hoping something has changed. If I have 2 Modelspace viewports is there any way to switch their contents? Right now I create 2 views and restore them in alternate viewports.
View 1 Replies View RelatedI have lost all my objects in paperspace . The layers for the objects are still there, my viewport is there and working just can't see the border.
this problem is keeping coming back. Working Autocad 2010 on windows xp.
My modelspace is showing thru my wipeouts... But the wipeouts are active and I have remade the viewports with the same result. I've used draw order with no change. And here's the kicker. It (the Wipeout) hides the viewport frame, but not the actual model space material being shown thru the viewport. It remains visible.
View 6 Replies View RelatedIn ModelSpace, when I drag the crosshairs over to the right edge of the screen, the crosshairs will vanish and reappear on the left side of the screen. This is a major problem: If I am reaching for an object off to the right and overshoot with the mouse a little, the crosshairs will suddenly be way over on the left. But much worse than this, I have a toolbar oriented vertically on the right side of the screen. I literally cannot get to that toolbar because the crosshairs swap over to the left side of the screen, instead of changing over to an arrow cursor to make use of the menus.
View 2 Replies View Relatedsomehow i got zoomed way out in paperspace and can't find my objects, how do i get back to centered over those?
View 9 Replies View RelatedI'm having an issue with CS6 where my objects don't want to snap together. I have snap to point checked but it still won't work. Also when I hover over point or intersections it doesn't say "intersections" or "center" or etc beside my mouse.
View 2 Replies View Relatedhow you get objects, say i drew a rectangle, to the correct size from model space to paper space. And why when you change the dimensions of an object to meters from milimeters, does it not change the size of the object on paperspace when it's at the same scale.
View 2 Replies View RelatedWe model the building using AEC steel members in AutoCAD ACA. When the piping group xrefs our model into their model (in regular AutoCAD) to add their pipe, the AEC steel behaves properly in model space, but when they go to dimension in paperspace (for example from the center of their pipe to the face of a column) osnap does not recognize the AEC steel geometry.
View 3 Replies View Relatedi'm cleaning up some CAD files i was given. in model space everything's on one layer and there's a lot of stuff that overlaps/sits on top of each other.
there are like 50 associated paper space sheets.
is there a way for me to drag these objects out without affecting the viewports in paperspace?
i could probably start putting everything on layers and turning them off, but i generally like to be able to lay everything out so i can see it all at the same time.
I'm working out some bugs that have cropped up now that I've upgraded to 2011. For starters, I can't seem to be able to snap to existing dimension lines like I used to, even though I have almost all of my snap types activated.
View 5 Replies View RelatedI layout photos for albums and I just upgraded to CS4. Even though I have the snap to grids function selected my photos don't seem to be staying in line with the grid. I don't know what to do!
View 1 Replies View RelatedI'm snapping to the corners of my multileader text boxes. OSNAPNODELEGACY is set to 1 and I'm not snapping to regular text or mtext. How can I change this behavior for the multileader text?
View 6 Replies View RelatedWe detail an extensive amount of 3D solid entities using viewports in layout tabs. Most of detailing entities are in model space, things like dimensions, part callout, and other text entities that provide description as to what's going on in the viewport. Periodically, there is a need to create entities in paper space. Lets say for example, I'm zoomed out to the layout of the page setup, and I have a viewport with a lot of 3D solid entities. Still zoomed out now, I want to add an icon to the corner of the viewport. When I invoke the "endpoint" osnap to insert my icon at the viewport's, without zooming in, and try to pick a corner of the viewport, the icon gets inserted to an endpoint of an entity that's in model space. What a pain in the behind. The only real work-around is to zoom right into the corner of the viewport, which defeats the whole point of osnaps in the first place.
I remember this not being the case. Did AutoCAD introduce a variable and set it's default to something that I don't it to be, or is this a screw-up of AutoCAD?