For a while I've been using Wipeout in paperspace to surround the title block in order for the underlying modelspace objects not to shine through. Suddenly this doesn't work anymore - i.e. modelspace objects are visible no matter what. I've been playing around with the bring to front / send to back commands, but to no avail. I
View 8 RepliesI'd like to know how to align an object in model space with the edge of my viewport in paperspace.
When I draw, I like to lay out multiple complete drawings in model space, make an appropriately scaled bounding box around them, and then snap a view port to the bounding box in my layout. I usually have multiple drawings lined up in a row in modelspace, so when I want a new layout I do a Save As and then pan around in my viewport to find the next bounding box, at which point I have to resize the viewport to get it to snap to the edges nicely. I really want to be able to to it the otehr way around- while panning I'd like to be able to grab a corner of my modelspace bouding box and snap it to the the corresponding corner of my viewport window. That way making new layouts would be a snap. Is there a way to do this in AutoCAD 2012 LT?
Since I installed 2010, I noticed that OSNAP seems to want to snap to objects in model space that are outside of the viewport while I am in paper space. It seems to only happen with polygonal viewports.
View 7 Replies View RelatedI have a floor plan xreffed into model space, visretain=1 and i can see the room numbers. I switch to paperspace and go to layer properties and highlight all layers and then turn on all layers in he drawing and thaw in all three columns and still the room numbers do not show. The layer listed in model space is on and thawed. Why won't it show?
View 2 Replies View RelatedMy modelspace is showing thru my wipeouts... But the wipeouts are active and I have remade the viewports with the same result. I've used draw order with no change. And here's the kicker. It (the Wipeout) hides the viewport frame, but not the actual model space material being shown thru the viewport. It remains visible.
View 6 Replies View RelatedMy drawings are setup with these settings:
LTSCALE = 1
PSLTSCALE = 1
CELTSCALE = 1
When I draw a line with linetype GAS then it is NON-READABLE in the modelspace, or I have to zoom in very deep. In a viewport, no matter what scale, it is exactly as I want it. Also if the VP is 1:100 or 1:50, the lines look the same in the layouts VP.
The results (what is printed on paper) are good, so that should remain as is.
How should I use / modify these settings (or my way of working) so that the lines are drawn READABLE in modelspace without having to zoom, and that the lines in the viewports (thus on paper) remain readable also.
In the plot dialog box the options Plot paperspace last and Hide paperspace objects are only supposed to be available in Paperspace however they show up as checked in some of our drawings when plotting from Modelspace. They should be greyed out then. (see attached) If I copy/paste all objects into a new drawing everything is fine. If I delete all layout tabs the options are still checked when plotting in model space.
The only thing I can figure is there are paperspace entities in my model space or that somehow paperspace is leaking through into modelspace.
I have a drawing I'm working from where everything was drawn in model space including the drawing titleblock and the grips for an archD plot. A single viewport is used in paper space that encompasses the entire drawing - titleblock and all. My problem is that I want to use a different scale in the paperspace layout but keep the titleblock (and archD plot grips). Adding another paperspace viewport in the centre of the original does not seem to work as when I adjust the viewport scale it zooms in far too much. Is there a simple solution that I am missing?
View 9 Replies View RelatedIs there a way to have text that is in paperspace print under objects that are in model space? like a watermark .
View 2 Replies View RelatedIs there a way to align a modelspace rectangle to viewport extents in paperspace? My situation is that I have several page 'layouts' (complete with paper size boundaries and title blocks) drawn in 2D modelspace, as this is how I have been plotting up until now. I am trying to set up these 'layouts' in actual paperspace Layout Tabs for batch processing, and I would like a way to position my view within a viewport so that the recatngle that I have drawn in modelspace snaps to the viewport extents. I am sure this is a 'day1' type of question, but I'm very new to paperspace Layouts.
View 4 Replies View RelatedI have this drawing that I just finished. There were a few dotted lines that were showing up correctly in model space. Then, when I switched over to paper space all of those lines were solid. I messed around with the option LTSCALE and set it to 0.01. This made the lines show up correctly in paper space, but now they are all messed up in model space. Is there an option to make it so they show up exactly the same in both model and paper space?
View 9 Replies View RelatedIs there a way to see and move paperspace viewport boundaries in model space?
Explaining: You have created layout which includes multiple viewports with different scale and size (view, section). Now you copy the layout to create a new layout with with same viewports. Now you have to change the view in all viewports. I have used technique where you double-click in viewport and you navigate in modelspace (pan/zoom) until you reach the right position.
The problem is If you have like 100 layouts with 10 viewports each, it takes very long time to pan the views into right position.
I have a some theories:
1. If I could see the viewports in modelspace, I could drag them all into right position without navigating them one-by-on in paperspace.
2. If I could pan the view in viewport by specific amount lets say 10m to the right.
In modelspace, architectural schematic plans sections elevations which, when viewported into paperspace drawings, are scaled to 1:100. I therefore work in modelspace with Current object scale = 1, global scale factor = 100. This makes dashed lines etc reproduce at legible scale in a drawing at 1:100.
What about when I move on to details, which in paperspace are scaled to 1:5? At present I start a new file with Current object scale = 1, global scale factor = 5. This makes dashed lines etc reproduce at legible scale in a drawing at 1:5.
Isn't there a way to achieve this, while keeping both the schematic and the detail drawings in modelspace on the same, single file?
Even the above system fails when I want to scale one elevation of the schematics at 1:50, or foundation details at 1:10.
i am trying to translate a Point coordinates from Paperspce to world coordinates in model space.The code i used in Land2006 worked OK but now in Civil3d 2012 it doesn't!
Private Sub GetPlais_Click()
Dim tmpnt1 As Variant, tmpnt2 As Variant, tmpPnt1 As Variant
Dim lole(0 To 2) As Double, upri(0 To 2) As Double
Dim returnobj As AcadObject
FrmGrid3.Hide
On Error GoTo Eline
ThisDrawing.Utility.GetEntity returnobj, tmpPnt1, "ÅðÝëåîå ôï ViewPort ðïõ èá äçìéïõñãçèåß ï êÜíáâïò!"
If TypeOf returnobj Is IAcadPViewport Then
[code]........
I have a drawing for which i am doing a vehicle swept path analysis on via autoturn in autocad 2012.
I have been sent the drawing, however when i open it the drawing only appears in paperspace and modelspace is blank........
I still trying to get 2012 to configured like our previous version. Howcver, I noticed something odd. In several of our drawings I covered some objects with a wipeout. I then sent to the dwg to pdf driver, then printed the pdf. On screen the objects are covered, in the pdf on screen the objects are covered, but in the actual print from the pdf some of the objects are faintly visible. with the previous 2010 version of AC we used. The files are the same and the printer is the same.
View 9 Replies View RelatedWhy my Hatch doesn't cover my lines?
View 3 Replies View RelatedI am having trouble with getting certain pieces of text to show up in my viewport in paperspace. There is text and linework on the same layer. However, only the linework shows up in paperspace, not the text. I have seen this before and don't remember how to fix it. It is a setting somewhere but I don't remember where.
View 7 Replies View RelatedI have lost all my objects in paperspace . The layers for the objects are still there, my viewport is there and working just can't see the border.
this problem is keeping coming back. Working Autocad 2010 on windows xp.
somehow i got zoomed way out in paperspace and can't find my objects, how do i get back to centered over those?
View 9 Replies View Relatedhow you get objects, say i drew a rectangle, to the correct size from model space to paper space. And why when you change the dimensions of an object to meters from milimeters, does it not change the size of the object on paperspace when it's at the same scale.
View 2 Replies View RelatedWe model the building using AEC steel members in AutoCAD ACA. When the piping group xrefs our model into their model (in regular AutoCAD) to add their pipe, the AEC steel behaves properly in model space, but when they go to dimension in paperspace (for example from the center of their pipe to the face of a column) osnap does not recognize the AEC steel geometry.
View 3 Replies View Relatedi'm cleaning up some CAD files i was given. in model space everything's on one layer and there's a lot of stuff that overlaps/sits on top of each other.
there are like 50 associated paper space sheets.
is there a way for me to drag these objects out without affecting the viewports in paperspace?
i could probably start putting everything on layers and turning them off, but i generally like to be able to lay everything out so i can see it all at the same time.
Turn off sheets that are not done (but I still want the sheet layout setup in the project browser.) So that hey do not show up in the automatic index on the cover sheet.
View 4 Replies View RelatedI am building my second book with Blurb, this time with LR4
it's going to be a small square and for the back and cover, I have built a file with photoshop and when I drop it to first page, no way I can "slide" it to cover the entire back+ cover
see my problem [URL]
OLE objects does not plot in color. The OLE object is in a title block that its being reference to the working drawing. Is the are referencing setting we can manipulate to resolve this issue?
View 1 Replies View RelatedWe have recently upgraded from AutoCAD 2010 and are having an issue with our wipeouts not displaying properly when we make a pdf using DWG to PDF in AutoCAD 2013.
It seems to happen when a wipeout is in an XREF and has many points, such as if you are trying to make it circular. The wipeout does not seem to function (you can see everything behind it).
When making a pdf using adobe or just making a .plt using a printer driver it displays properly but not with the dwg to pdf. I have tinkered with the display order, the display settings, the merge control setting, etc. so far nothing has worked. I have gone into the file that is XREF'ed into my active drawing and made a pdf from there and it looks ok but not when it is XREF'ed into another drawing. I have many blocks that have "circular" wipeouts in them that are not displaying correctly.
I am trying to use the WIPEOUT command to make one object that is in front of another one obscure the one behind it. I have my polyline drawn around the object in question, but I need for things to show through the object where there are holes in the object.
In my specific example, I have a tree. I need three trees in front of one another and some against a wall. I would like for the wall to show through between the branches of the tree. I would like pieces of the trees in the background to show through between the branches of the tree in the foreground. So there are multiple holes in the foreground tree because the leaves and branches are not one solid object. Is this possible?
A more simple example would be if there was an object with only one hole in it...such as a door with a window through it...could the wipeout apply to the door - but still show through the wall or scenery behind that door only where the window is.
I am having trouble using wipeout with text. I want to place text over a lineand with text on top, but when i print the line that i wipedout has printed
View 8 Replies View RelatedI am trying to plot using a wipeout. Plot preview looks as it should be...problem comes when plotting, it seems to ignore the wipeout. I have tried toggling the frames on and off...checked if the layers were frozen etc.
View 9 Replies View RelatedHaving problems with the Hide Frozen Objects checkbox in 2013? It's just not working at all for me.
View 2 Replies View Related