I have a drawing for which i am doing a vehicle swept path analysis on via autoturn in autocad 2012.
I have been sent the drawing, however when i open it the drawing only appears in paperspace and modelspace is blank........
For a while I've been using Wipeout in paperspace to surround the title block in order for the underlying modelspace objects not to shine through. Suddenly this doesn't work anymore - i.e. modelspace objects are visible no matter what. I've been playing around with the bring to front / send to back commands, but to no avail. I
View 8 Replies View RelatedExample for creating layouts for the zoomed portion in the model space.. Im able to zoom the drawing sheet but im not able to create layout for that sheet..See my attachment ..i created layouts manually(layout1,layout2,layout3)....But i dont know how to do this in .net API.
View 1 Replies View RelatedI have this drawing that I just finished. There were a few dotted lines that were showing up correctly in model space. Then, when I switched over to paper space all of those lines were solid. I messed around with the option LTSCALE and set it to 0.01. This made the lines show up correctly in paper space, but now they are all messed up in model space. Is there an option to make it so they show up exactly the same in both model and paper space?
View 9 Replies View RelatedIn modelspace I have a drawing that is aligned perfectly, but when I create a new viewport in a layout the drawing that was created in modelspace seems slightly rotated in the layout view?
View 3 Replies View RelatedI would like to ask if its possible to extract part of the drawing from modelspace then add title block in lay-out and scale the extracted drawing...how will i do that?
View 9 Replies View RelatedI'm attempting to copy paste a block and a line from one tab to another in the same drawing and it doesnt appear. I get
Command: _pasteclip Duplicate definition of block _Oblique ignored.
Duplicate definition of block _ArchTick ignored.
Duplicate definition of block attr_FFL ignored.
i've purged, i've audited, i've even created a new drawing and transfered the information but im still getting this problem.The strange thing is occasionally it works.also, i purge so the drawing it is clean, then i try to paste, then when purging again 1000's of blocks appear in the purge diologue box. A49285 to A55404 & a block called A$C4E2C21A4
This doesn't work:
oPartDocument.ComponentDefinition.WorkPoints.Item(2)
All I have is one item. (Center Point)
I created a program for conversion, which converts layers and dimensions, among other things. My program runs on AutoCad 2012, had no problem with regards to AutoCad 2012. The problem is when I try to print by opening the drawing in AutoCad 2008. The preview is blank. Does some configuration that possibly I changed or I forgot to change so that it is correct?
The drawing (before) prints in AutoCad2008.
The drawing (after) doesn't print in AutoCad 2008.
When opening a drawing that turns out to already be open by someone else, the "Open as read-only" warning isn't showing up for one of our users. This is becoming confusing and in the end someone's change will not take. Is there a setting that may be turned off?
View 9 Replies View RelatedThis is something that I have tried to understand and find a work around since I started working with Inventor. Is there a way to insert a BOM into a part drawing that does not reference itself? When we create parts they are cut or machined from a designated material (size, shape, etc) which has it's own part number, one that we have to manually enter into the drawing BOM with it's description. Is there a way to attach this raw or base material to a part file as a subordinate part that can be seen in parent assembly's BOM's?
If there is a way to attach a raw material to a ipt's BOM that can be seen at all levels above it we could explore the option of streamlining our BOM creation process.
IV 2012
Running on:
Windows 7 64 bit
12 GB Ram
Intel Xeon processer
I'm trying to automate an attribute extraction in the form of a table. I create the .dxe file but when I use this template file with -eattext (or -dataextraction), in a drawing different than the one the .dxe was created in, I still get the original table and not the one with the attribute values of the curent drawing.
View 4 Replies View RelatedWhy doesn't appear the trace of an object or line when i'm drawing it or moving it?
In Autocad 2005.
This drawing file doesnt allow copy to clipboard or even binding on to other drawing. It was originally sent to us from another company, I have deleted all the objects and layers, purged it. If I create a new line or other object, Ctrl+C doesnt work.
View 2 Replies View RelatedMy customer is having trouble with the part list feature inside the Inventor 2D drawing.
For example, He has a car assembly file with 4 wheels and alot more subassemblies, then he creates a view representation which only visible for 1 wheel.
When he generates the part list in Inventor 2D drawing, he go to part list >filter setting and set to ‘’Assembly view representation’’ but the quantity for the part list is still showing as 4 as per attachment.
change the value manually inside the part list table?
I have a drawing that I created with acad 2010 that has a pdf xref attached. I just updated to 2013. And now when I go to plot the drawing my xref shows up in preview but doesn't show up on the plot.
I can go back to my 2010 version, and it plots fine. What gives?
Since I'm a little new to this CAD Stuff, I'm having a bit of trouble working out the text size for a viewport.
I've drawn something at a scale of 1:1 in ModelSpace (As per the senior designers instructions) and I've got it zoomed in at a scale of 1:250 in paperspace. According to the text size settings I've been given (they were in place before i joined the company), the text in modelspace should be set to 625; now, when i go into paperspace and print the drawing out, the text looks much too big.
What size should I have the text set to so it doesnt look so big in paperspace??
Is it possible to lock the ucs in modelspace? I want to use it in a lisp!
View 4 Replies View RelatedI am trying to find the ploylines in my autocad modelspace. It does not matter what layer they are on, I just need to find all of them as to find their coordinates. I can find the coordinates of a recently created polyline with the vba help but now I'm stuck with just finding a polyline in the modelspace.
View 2 Replies View RelatedWhenever I'm in model or paper space, damn thing disappears.
Reboot is always an option, but it's the last thing I want to do at this point.
I am using AutoCAD LT 2004 and I have two separate xrefs and the orientation is different in each. How do I get each one to be similar in model space without having to to into the original files? Is there a way besides just rotating (RO) each file?
View 2 Replies View RelatedFor some reason, I have 1 drawing that will let me select and modify some dimensions in a Paperspace viewport, but others are nonselectable. I can go to the Model Tab and select any dimensions I want.
If I select the dimension in Model Tab, I can go back to Paperspace Viewport and select that dimension, but now dimensions that were selectable before are nonselectable. unsure:
I am thinking it may be graphics card issue or some sort of limit.
is there a command that snaps your dimensioning to changes in model space. having a hard time with this, dimisioned in paper space but to many changes and found i wasn't changing the paper space dims and decided to move all dims to model space.
View 8 Replies View RelatedI received a drawing this morning, and it's paperspace looks great. However when I tried to view the drawings in modelspace it was empty. All the layers are on, when I click into the viewport (in paperspace) I can draw a line on the same layer as the block and that will show up in modelspace, yet no block.
Is this a feature of CAD, never experienced this before.
P.s. The blocks are available to insert in modelspace , however I'm just curious as to why I can not see the blocks that quite clearly exist in modelspace already.
performance differences between:
1) Using a selction filter to get the objectIDs of a particular type, then iterating them, or
2) Iterating all modelspace objects, checking ObjectID.ObjectClass.Name for the desired type.
I am encountering a problem using AutoCAD Civil 3d 2012. When finishing a certain command and going back to the ribbon, my cursor does not want to go out of the modelspace. So i can't click any command in the ribbon, or in any other program outside of AutoCAD.
Even when pressing escape to stop a command, nothing changes. Using the viewcube solves this problem for one time. But every time I draw a line or even zooming, the problem comes back again.
When I use Zoom Extents, my map becomes a tiny dot near the edge of model space. This happens will all of my drawings and they are not "zooming" to the same area in model space. One might be a tiny dot hidden in the left corner under the geomarker and the next might be in the upper right corner 1/4" in size.
View 1 Replies View RelatedI have a co-worker that wants to rotate the UCS ICON and the CROSSHAIRS in model space but not the actual view on the screen. On my machine this is what it does when I use the UCS command. On their machine it rotates everything. Is there a "variable" that controls this?
View 3 Replies View RelatedMy drawings are setup with these settings:
LTSCALE = 1
PSLTSCALE = 1
CELTSCALE = 1
When I draw a line with linetype GAS then it is NON-READABLE in the modelspace, or I have to zoom in very deep. In a viewport, no matter what scale, it is exactly as I want it. Also if the VP is 1:100 or 1:50, the lines look the same in the layouts VP.
The results (what is printed on paper) are good, so that should remain as is.
How should I use / modify these settings (or my way of working) so that the lines are drawn READABLE in modelspace without having to zoom, and that the lines in the viewports (thus on paper) remain readable also.
I have a project where 60 drawings will be duplicated for each of a dozen sites. Each site has a four digit prefix (i.e. 800X) that is added to the drawing number, equipment callouts, leaders and various notes throughout the sheets. Even using Find/Replace, this is a lot of work to revise every time I copy them, so I’m thinking that this is a job for fields, no?
Well, I had no problem making a “global” field called SiteNo and inserting it into the title block. Then I inserted the same field into a couple of references in the general notes as well, where it works fine. But when I put it into several leaders sprinkled throughout the drawing I found a problem: regen or regen all will update the title block and note references (all in paperspace, of course), but not the ones in model space. I’ve tried putting the field in both mtext and dtext, and I’ve checked to be sure FIELDEVAL is set to 31. Nothing makes fields in modelspace update.
But I know that the field is set up correctly. If I doubleclick any modelspace occurance (text or mleader), then right click and choose “update field”, it fills in the right value. This however negates my goal. If I have to select each one, I might as well put it in as text and use FIND/REPLACE on each individual drawing.
I was REALLY hoping that I could go to the properties of the sheet set, change one box, and see all occurrences in all drawings for that site update, which is my understanding of the purpose and power of fields. I've spent a lot of time searching the web, seen a lot of issues and solutions, but nothing that quite hits my problem.
The AutoCAD deadline-sensor is working well this week as this Project near completion.
The closer we get to the deadline, the more AutoCAD slows down.
My UCS Icon has disappeared from Modelspace.
It's were it belongs in Paperspace.
The USC Icon is set to "Noorigin" and the color is set to RED for Modelspace.
I need it to orient the many angled spaces we have in this Plan.