Example for creating layouts for the zoomed portion in the model space.. Im able to zoom the drawing sheet but im not able to create layout for that sheet..See my attachment ..i created layouts manually(layout1,layout2,layout3)....But i dont know how to do this in .net API.
View 1 RepliesSome code / lsp that will cycle thru layouts and insert a rectangle into model space of where the viewports are actually looking.
I am trying to separate out a number of layouts to different drawings and want to speed up the process.
When I try and import layouts as sheets, the "Prefix sheet titles with file name" is subdued. (AutoCAD MEP 2012)
View 3 Replies View RelatedI have a drawing for which i am doing a vehicle swept path analysis on via autoturn in autocad 2012.
I have been sent the drawing, however when i open it the drawing only appears in paperspace and modelspace is blank........
I have this drawing that I just finished. There were a few dotted lines that were showing up correctly in model space. Then, when I switched over to paper space all of those lines were solid. I messed around with the option LTSCALE and set it to 0.01. This made the lines show up correctly in paper space, but now they are all messed up in model space. Is there an option to make it so they show up exactly the same in both model and paper space?
View 9 Replies View RelatedIn modelspace I have a drawing that is aligned perfectly, but when I create a new viewport in a layout the drawing that was created in modelspace seems slightly rotated in the layout view?
View 3 Replies View RelatedI have been using one routine very successfully to create a pline in modelspace that has the outline of the chosen viewports in the drawing. This one works great.
Now I am trying add other routines that I've done to better fit my needs. If I use each routine individually at the command line they work, but when I use all in a single command I got the following errors:
The routine SetColor - does not change color to Bylayer The routine RectWidth - ; error: bad SSGET list
Why?
See the attached file for more details and be free to improve whatever you want in my routines because they are very basic.
And, if I am not asking to much, is that possible to not be prompt to select objects? I mean, the routine could automatically select all viewports in the drawing...
I would like to ask if its possible to extract part of the drawing from modelspace then add title block in lay-out and scale the extracted drawing...how will i do that?
View 9 Replies View RelatedHow can i get number of layout in the current drawings?
View 3 Replies View RelatedI am looking at modifying a drawing template that contains several layouts (A0 to A4 size pages). We want to be able to input drawing information for the title block in one place and duplicate the information across all of the layouts without manually copying it across (in an effort to enforce 1 dwg per drawing). Looking into this, one way looks to be using dwgprops to define the text content and then use fields to populate the required parts of the title block...
My question is this: Is there any way of setting it so that when a user starts a new drawing, a prompt comes up on the screen asking for the pertinent information before the drawing is started and the user forgets to put the right info? Lsp or other means can be considered.
i have a test drawing attached with layout 1 and layout 2.
from model to layout 1 takes 2-3 seconds on my crappy computer, from model to layout 2 takes 8-10 seconds on the same crappy computer.
this sample i attached has a xref binded. which result is the same 3 and 8 seconds respectively.
you may think this is not a big deal. but layout 1 will take 10 seconds to to switch to if you have 5 xref while layout 2 will take a minute.
i did my research and haven't find the difference in variables between the two paperspace layouts.
tried all the variables made no difference:
psltscale, msltscale, celtscale, savefidelity, etc.
also set both viewoprts to undefined same thing.
the only difference is "1" is created from a blank autocad template by selecting "metric - no template", and "2" is imported from a civil 3d dwg after done a plan/profile production and that thing created that layout.
is there a tool to compare all variables between 2 layouts and find the differences? i am certain the problem lie within system variables.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
Has problem of layout limits such that he can't create more than 6 layouts, the 7th layout is automatically deleted. I know that we can create up to 255 layouts and sometimes more. Is there a variable settings that could have gone wrong inasmuch that the maximum layouts is now 6?
View 1 Replies View RelatedWe often have drawings with multiple sheets.Usually the first couple of sheets are devoted to identifying components and where they should be placed. The remaining sheets provide details on specific components (dimensions, tolerances, etc.).
It would be nice to be able to reference (associatively) other sheets, so it is easy to find information on a component when looking through the drawing package. For example, add a note that says "See sheet 12", and have the 12 update if that sheet (or drawing view?) changes location in the package.
In my company they draw out multiple pages of construction drawings in 1 file. They do all their sketching off to the side and then bring the finish detail onto the sheet that will be plotted out later.
They then start a new sheet below it and continue onward until they have 20 plus drawings in one DWG file.
What I want to do is print each drawing individually to whatever plotter or printer I set up. I can't batch file as I understand it because there are so many pages of a print in 1 drawing. Because all the DWG file has multiple pages I have to go thru several windows to get each page plotted out.
Is there a script or batch file that I can use that I can set up the plot and then for example highlight the page I want to send to the printer then go to the next print, highlight it and it gets sent to the printer without having to set up the plot again?
We use Autocad 2000 so I am working with a basic set up here without a lot of frills the later versions have. I am trying to get them to seperate the pages but that isn't working for the earlier drawings they have done.
As you smart individuals can figure out, we do up drawing packages for construction that consist of several drawings, hundreds of drawings, for several modules of construction. Our process usually consists of one layout per drawing, so that the lisp guy can do a drawing count and put in sheet numbers based on how I manipulate the list of drawings in the one directory folder.
Now I have a client, despite the way we currently do things, requires that about 70% of the drawings will have multiple layouts. Now we're back in the stone ages, manually putting in sheet numbers, eating up our budget for this contract.
I am having some issues with sheetset. The pdf name is name of the drawing + name of layout.
1. The sheet sets do not follow the order of the drawings layouts
2. The list is not according to the drawings order in the directory
3. The sheets are automatically combined when I want them to be separate
4. There are numbers 1,2,3... automatically prefixed to the sheet causing additional trouble.
I have 4 layouts all from the same drawing that I need desperately to print now. But for some reason only the border and Title block will print for me. What have I done to cause this? And how can I rectify it? I need to print these tonight
View 3 Replies View RelatedLisp that can create layouts (using a dwt--I would code in the file path to my dwt) reading data from a csv file??? I would create the drawings ahead of time, all I would need is to run the lisp and it would create all the layouts in those dwgs and name them according to the csv.
The csv file contains the drawing names in column A and the layout names in column B. So, what I want to do is create "n" number of layouts in specific dwgs, using the cell data it reads from column A--which are the drawing names, and then rename all those layouts with the cell data from B--note it would not create duplicate (existing) tabs. This way I can re-run it later to add new layouts to the drawings as needed.
The reason is that I work on projects with several hundred layouts--thus the need to create layouts more easily across as many drawings as necessary. Instead of renaming/deleting a ton of layouts; it would be easier to start with a minimal template(s) and have the lisp create the exact number of layouts we need instead of going back and making a ton of edits. Since the csv is created at the beginning of the project, any changes later (adding layouts), can easily be done by running the lisp again.
I need drawing borders in special formats - can't use the DIN or ANSI formats. How do i create these special paper sizes / layouts in auto cad 2007?
Example: i need a paper size / layout 56 in wide and 22 in high.
Working in an idw file, I have a need for two drawing sheets with the identical views of the same part. However, each sheet will need different dimensions and annotations. What I would like to do is after completing one sheet, in one step create the second identical sheet, then just edit/add dimensions and annotations. Is there a method to do this? So far, I have only been able to copy one view at a time from sheet to sheet.
View 2 Replies View RelatedI have an assembly drawing made with 2 parts in it. I have the assembly drawing as Sheet 1 and each part also in the file as Sheet 2 and Sheet 3. What I have a problem with is that when I change or update the original files for Sheets 2 and 3 it doesn't update the sheets in the assembly drawing. Is there a way to keep these files connected. I need to have the standard sheets for filing and part designation, but when production call for the assembly to be needed, the assembly (Sheet1) with the Attached part drawings (Sheets 2 & 3) hit the production floor. Without them linked a mistake will be made. There are to many engineers in my department and we all make production changes to parts and if they are not linked bad things will happen. I am just trying this out, we have a lot of assemblies that will be great for the production if I can get all the part and assembly files to work together and print at the same time from on file.
I am using Inventor 2012 if that matters.
how can I copy inventor drawing sheets? I don't want write everything again. It must be a way.
I use inventor 2012.
Autodesk inventor Design Suite Premium 2012
Windows 7 x64, 750 GB harddisk
Intel core i5 Cpu @3.2 GHz, 8 GB Ram,
nVidia Quadro 2000 D Graphics Card
I'm setting up drg templates for a company. I need different drawing titles for each drg sheet, is this possible in Inventor 2012?
View 9 Replies View RelatedIs there a way, in my drawing template, to set one field as "Part Number iProperty from parent assembly on sheet 1 base view"? I want every single sheet in my .idw to reference the same "Part Number" iProperty from the assembly in the base view of sheet 1.
View 2 Replies View RelatedWhat I need to know is, will the drawing sheets/titleblocks attributes etc, I have created to insert in AutoCAD work in Civils 3d or will i need to create separate ones.
View 4 Replies View RelatedI am creating plan sheets and using the sheet creation tool. The plan sheets I am looking to make have stacked view, similar to a plan and profile sheet, only they have the horizontal alignment in both views.
I have a template set up with two viewports, but when I try to create the sheets it puts the same view frame in both of the viewports. Is there any way to set this template up so that I can have, lets say, STA 100+00 - 110+00 in the top viewport and then STA 110+00 - 120+00 in the bottom viewport. I understand that I can move the viewports once they are created, but I would rather have that done automatically. I am not sure if what I want done is possible with Civil 3D.
I would like a routine that will determine if 'Page Setup A' is in the drawing and if so, apply 'Page Setup B' to all all layouts within the drawing. I would like to have it run upon drawing open in the ACAD.lsp
Basically we've changed our master page setup names, and now when a user switches to modelspace then back to paperspace the layout loses its configuration.
I have a csv file that has the drawing names and their layout names listed in columns A and B. Before I begin a project, I have to create the Sheet List (in Excel) and the csv file. The csv file is needed because I have a lisp routine that reads the csv and updates all my Title Block attributes in all my drawings. (VERY sweet program) What I'm wanting to do, is create new layouts (using my dwt) based on the information in the csv file. So, when I start a new project all I need to do is create the base drawing files first. Then, in my csv file I've got those drawing names listed in Column A and their corresponding sheet titles (Layout names) in Column B. I run the lisp and it reads the csv and creates layouts in all those base drawings and naming the layouts with the sheet titles from column B.
Column A Column B
DRAWINGS SHEET TITLES
drawing1.dwg A100
drawing1.dwg A101
drawing"n".dwg "n"500
Etc, etc.
I'm needing a way to automate creating hundreds of layouts at once. (very time consuming).So the lisp has to be able to read a csv (or Excel--doesn't really matter) and create new layouts (using my dwt) in as many drawing files represented in column A. [and filtered so it doesn't create duplicates so I can run the routine at a later date when new sheets are added to the drawings] Captcha?
I've created a couple of programs:
One - that will start a new project file, add our standard drawing sheets
two - Insert a bunch of wblocked components based on user input
programs 3 - 6 all do the same as program 2, just different components for different sheets.
I can run all these programs and they work (i need to do a lot of "clean-up" but they work)...
I have them set-up to open the next drawing.But i have to type in the next command, and continue until all my programs and done running.
My questions is how can I accomplish this without having to continually type in commands?I can't run these as a script, but is there another method?
How to automatically print the layers of a drawing in separate sheets in one go?
I wanted to print the layers of a particular drawing each in separate sheet but wondering if there might be an automated way to do so. For example, if I a particular drawing comprise 15 layers then how to print each one of these layers in a separate sheet.
Sure, there might be more than one way to achieve this (like controlling the “plot” feature on the “layer properties manager” but what I’m looking for is an automated way to print all the 15 layers separately in one go.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I have (unfortunately) the necessity to modify into some files (which are used as models) the print style preset.
These files, which are necessary for the realization of electrical diagrams, have inside hundreds of layout.
Each layout set default printing parameters, so as "Laser b/n.pc3," as the paper size "A4" scale "Scale to Fit", and plot style "Schemi.ctb", etc. ..
Is there a way to create a macro (a field unknown to me) or something similar, to automatically change in all the default layout, for example, the printer "Colori.pc3" and the print style in "Schemi_colori.ctb "?