AutoCad :: Scale Factors In Modelspace To Suit Different Scaled Viewports In Paperspace
Nov 26, 2011
In modelspace, architectural schematic plans sections elevations which, when viewported into paperspace drawings, are scaled to 1:100. I therefore work in modelspace with Current object scale = 1, global scale factor = 100. This makes dashed lines etc reproduce at legible scale in a drawing at 1:100.
What about when I move on to details, which in paperspace are scaled to 1:5? At present I start a new file with Current object scale = 1, global scale factor = 5. This makes dashed lines etc reproduce at legible scale in a drawing at 1:5.
Isn't there a way to achieve this, while keeping both the schematic and the detail drawings in modelspace on the same, single file?
Even the above system fails when I want to scale one elevation of the schematics at 1:50, or foundation details at 1:10.
View 9 Replies
ADVERTISEMENT
Apr 15, 2013
I have a 3D part, which I want to scale down to 0.5 the size in X and Y direcions, but I don't want to scale it down in Z direction.
Is this even possible? How do I go about doing it?
View 9 Replies
View Related
Aug 29, 2011
My drawings are setup with these settings:
LTSCALE = 1
PSLTSCALE = 1
CELTSCALE = 1
When I draw a line with linetype GAS then it is NON-READABLE in the modelspace, or I have to zoom in very deep. In a viewport, no matter what scale, it is exactly as I want it. Also if the VP is 1:100 or 1:50, the lines look the same in the layouts VP.
The results (what is printed on paper) are good, so that should remain as is.
How should I use / modify these settings (or my way of working) so that the lines are drawn READABLE in modelspace without having to zoom, and that the lines in the viewports (thus on paper) remain readable also.
View 5 Replies
View Related
Jan 9, 2012
In the plot dialog box the options Plot paperspace last and Hide paperspace objects are only supposed to be available in Paperspace however they show up as checked in some of our drawings when plotting from Modelspace. They should be greyed out then. (see attached) If I copy/paste all objects into a new drawing everything is fine. If I delete all layout tabs the options are still checked when plotting in model space.
The only thing I can figure is there are paperspace entities in my model space or that somehow paperspace is leaking through into modelspace.
View 7 Replies
View Related
Feb 12, 2013
I have a drawing I'm working from where everything was drawn in model space including the drawing titleblock and the grips for an archD plot. A single viewport is used in paper space that encompasses the entire drawing - titleblock and all. My problem is that I want to use a different scale in the paperspace layout but keep the titleblock (and archD plot grips). Adding another paperspace viewport in the centre of the original does not seem to work as when I adjust the viewport scale it zooms in far too much. Is there a simple solution that I am missing?
View 9 Replies
View Related
Jan 11, 2013
Is there a way to have text that is in paperspace print under objects that are in model space? like a watermark .
View 2 Replies
View Related
Feb 27, 2013
I've got a block that I want to scale in pspace, but I would like the attrib height to remain constant even at different scales. I have used annotative blocks in vports with much success, but I would like to do the same thing only in pspace.
View 8 Replies
View Related
May 12, 2009
Since I installed 2010, I noticed that OSNAP seems to want to snap to objects in model space that are outside of the viewport while I am in paper space. It seems to only happen with polygonal viewports.
View 7 Replies
View Related
Nov 30, 2011
Is there a way to align a modelspace rectangle to viewport extents in paperspace? My situation is that I have several page 'layouts' (complete with paper size boundaries and title blocks) drawn in 2D modelspace, as this is how I have been plotting up until now. I am trying to set up these 'layouts' in actual paperspace Layout Tabs for batch processing, and I would like a way to position my view within a viewport so that the recatngle that I have drawn in modelspace snaps to the viewport extents. I am sure this is a 'day1' type of question, but I'm very new to paperspace Layouts.
View 4 Replies
View Related
Dec 15, 2011
I have this drawing that I just finished. There were a few dotted lines that were showing up correctly in model space. Then, when I switched over to paper space all of those lines were solid. I messed around with the option LTSCALE and set it to 0.01. This made the lines show up correctly in paper space, but now they are all messed up in model space. Is there an option to make it so they show up exactly the same in both model and paper space?
View 9 Replies
View Related
Jul 26, 2012
Is there a way to see and move paperspace viewport boundaries in model space?
Explaining: You have created layout which includes multiple viewports with different scale and size (view, section). Now you copy the layout to create a new layout with with same viewports. Now you have to change the view in all viewports. I have used technique where you double-click in viewport and you navigate in modelspace (pan/zoom) until you reach the right position.
The problem is If you have like 100 layouts with 10 viewports each, it takes very long time to pan the views into right position.
I have a some theories:
1. If I could see the viewports in modelspace, I could drag them all into right position without navigating them one-by-on in paperspace.
2. If I could pan the view in viewport by specific amount lets say 10m to the right.
View 2 Replies
View Related
May 9, 2012
When I setup my viewports for my sheet I have a viewport that I set the viewport scale to 1:5. This is not showing up correctly and zooms the drawing off the sheet. When I go into the viewport and use the zoom to scale 1/5xp the scale is correct and totally different than the viewport scale 1:5. Since all my annotative text and hatching is set to 1:5 1:10 and 1:100 the annotations do not work since viewport scales 1:5, 1:10 and 1:100 are showing up incorrect and do not correspond to the correct zoom factors of 1/5xp 1/10xp and 1/100xp.
View 7 Replies
View Related
Feb 22, 2013
I am trying to organize 7 viewports in paperspace. My drawing is a metric drawing, and when I set a scale to one view port (for example 1:25) then double click into another viewport, the viewport that I origanly set at 1:25 vooms out to fit all contents in model space.
View 2 Replies
View Related
Mar 26, 2012
I have a floor plan xreffed into model space, visretain=1 and i can see the room numbers. I switch to paperspace and go to layer properties and highlight all layers and then turn on all layers in he drawing and thaw in all three columns and still the room numbers do not show. The layer listed in model space is on and thawed. Why won't it show?
View 2 Replies
View Related
Dec 18, 2012
For a while I've been using Wipeout in paperspace to surround the title block in order for the underlying modelspace objects not to shine through. Suddenly this doesn't work anymore - i.e. modelspace objects are visible no matter what. I've been playing around with the bring to front / send to back commands, but to no avail. I
View 8 Replies
View Related
Jan 2, 2014
I was recently setting up a new install of Civil 3D 2012 and was going to set the default coordinate system to 3TM (CM=114°W) when I realized the scale factor was set to 1.0 at the central meridian.
It should be 0.9999. I checked some others and they are all the same. I also checked the 6TM projection and it is also set to 1 although it should be 0.9992
Below is the WKT(ESRI) out of Civil for EPSG code 3401:
PROJCS["CANA83-10TM115",GEOGCS["GCS_North_American_1983",DATUM["D_North_American_1983",SPHEROID["GRS_1980",6378137.000,298.25722210]],PRIMEM["Greenwich",0],UNIT["Degree",0.017453292519943295]],PROJECTION["Transverse_Mercator"],PARAMETER["False_Easting",0.000],PARAMETER["False_Northing",0.000],PARAMETER["Scale_Factor",1.000000000000],PARAMETER["Central_Meridian",-115.00000000000000],PARAMETER["Latitude_Of_Origin",0.00000000000000],UNIT["Meter",1.00000000000000]]
Looking up the .PRJ for EPSG 3401, the published standard is:
PROJCS["NAD83 / Alberta 10-TM (Resource)",GEOGCS["GCS_North_American_1983",DATUM["D_North_American_1983",SPHEROID["GRS_1980",6378137,298.257222101]],PRIMEM["Greenwich",0],UNIT["Degree",0.017453292519943295]],PROJECTION["Transverse_Mercator"],PARAMETER["latitude_of_origin",0],PARAMETER["central_meridian",-115],PARAMETER["scale_factor",0.9992],PARAMETER["false_easting",0],PARAMETER["false_northing",0],UNIT["Meter",1]]
Win 7 Enterprise SP1 64 bit
Intel i7 3770 @ 3.40 GHz
16 GB RAM
Civil 3D 2012 SP2
View 1 Replies
View Related
Nov 19, 2012
Is there an easy way to switch from a viewport in paperspace to modelspace and have the same layer state show up? I typically run with my paperspace set up with the layers showing how they will print (show lightweights and display plot styles) but I would like to be able to switch to model space and only see the layers that are showing in a particular viewport, to minimize manual layer isolation.
I am using C3D 2011.
Civil 3D 2013, HF3.0
Windows 7, 64-bit, SP1
View 4 Replies
View Related
Mar 30, 2012
when it comes to viewports in paperspace in 2013, due to the nature of my work i have several layout drawings all drawn on top of each other and all with ther own txt and dims etc, which again is all on top of each other making it impossible to work in model space, for this reason i work in paperspace within a viewport but now i have upgraded to 2013 while i am in mid command e.g. dimension and zoom into first point then zoom back out and in again to second point, by this time i have been kicked out of the viewport and just in paperspace so cant complete the command, doesnt always happen?
View 9 Replies
View Related
Dec 18, 2012
In paper space I have a rectangular viewport showing a floorplan. I have placed another smaller viewport over the larger vp in order to show a scaled-up detail of the floorplan. However I can still see the image from the larger vp below ( as well as the smaller vp's contents ), Is it possible to lay one vp over another, blocking out the image from the vp below?
View 9 Replies
View Related
Dec 17, 2012
How to control existing layers (Freeze On/Off), in an existing viewports (5 of them in Paperspace) in AutoCad Existing drawing with VB.net? I just want to trigger On or Off, different layers in each different viewports.
View 2 Replies
View Related
Feb 14, 2013
i'm cleaning up some CAD files i was given. in model space everything's on one layer and there's a lot of stuff that overlaps/sits on top of each other.
there are like 50 associated paper space sheets.
is there a way for me to drag these objects out without affecting the viewports in paperspace?
i could probably start putting everything on layers and turning them off, but i generally like to be able to lay everything out so i can see it all at the same time.
View 1 Replies
View Related
Jun 18, 2012
i am trying to translate a Point coordinates from Paperspce to world coordinates in model space.The code i used in Land2006 worked OK but now in Civil3d 2012 it doesn't!
Private Sub GetPlais_Click()
Dim tmpnt1 As Variant, tmpnt2 As Variant, tmpPnt1 As Variant
Dim lole(0 To 2) As Double, upri(0 To 2) As Double
Dim returnobj As AcadObject
FrmGrid3.Hide
On Error GoTo Eline
ThisDrawing.Utility.GetEntity returnobj, tmpPnt1, "ÅðÝëåîå ôï ViewPort ðïõ èá äçìéïõñãçèåß ï êÜíáâïò!"
If TypeOf returnobj Is IAcadPViewport Then
[code]........
View 1 Replies
View Related
Apr 10, 2012
I'd like to know how to align an object in model space with the edge of my viewport in paperspace.
When I draw, I like to lay out multiple complete drawings in model space, make an appropriately scaled bounding box around them, and then snap a view port to the bounding box in my layout. I usually have multiple drawings lined up in a row in modelspace, so when I want a new layout I do a Save As and then pan around in my viewport to find the next bounding box, at which point I have to resize the viewport to get it to snap to the edges nicely. I really want to be able to to it the otehr way around- while panning I'd like to be able to grab a corner of my modelspace bouding box and snap it to the the corresponding corner of my viewport window. That way making new layouts would be a snap. Is there a way to do this in AutoCAD 2012 LT?
View 4 Replies
View Related
Oct 29, 2012
A few times out of each day when I plot all of my viewports will be moved of the printable area into the gray area below in paperspace.
I cannot figure this out as I have used a few different profiles from different machines and still have the same issue.
View 1 Replies
View Related
May 8, 2013
why when i try to plot a scale drawing my profile loses it scaled size and all texts and images are huge.
See attached.
Doc1.pdf
View 8 Replies
View Related
Oct 16, 2013
How would I go about inserting a field in modelspace that indicates the scale of a viewport. I only have one viewport.
View 5 Replies
View Related
Aug 9, 2013
I would like to ask if its possible to extract part of the drawing from modelspace then add title block in lay-out and scale the extracted drawing...how will i do that?
View 9 Replies
View Related
Jul 8, 2011
I have several pillars that I want to scale down to the same size, but I don't want to have to scale them individually or reposition them once I'm done. Is there any way to scale them all without making them move along the axis being scaled? (I should have made them instances of each other. My only problem there is that I couldn't reposition one pillar without moving the others. for future reference, is there a way to temporarily break the instance relationship so on can be edited?)
View 2 Replies
View Related
May 30, 2013
Viewport. I have scaled the viewport to 1/16 in paperspace, but the drawing is to large and does not fit in the viewport I need to zoom in to make it fit.
View 4 Replies
View Related
Feb 14, 2013
In paperspace I set the viewport scale to 1-1/2"=1'-0" on a ANSI D-size plot. But when plotted at (layout) 1:1, it comes out to be 1/8"=1'-0" on a engineering scale.
Explain Autodesk's logic?
View 1 Replies
View Related
Dec 1, 2006
I am using CAD LT 2005 but also have access to AutoCAD 2005.
I am unsure about the best way of dealing with text in drawings. Originally I used to put my text in model space - which was fine until I started using multiple layouts in paperspace at different scales. The text would come out either to big or too small.
Others in my office say they put the text in paperspace ONLY at the right scale for that layout. This is fine until you realize that if you have to put text in 4 different layouts at 4 different scales 4 different times it takes forever.
So - I looked up about a command called SPACETRANS which seems to offer a way of working out the right scale for the text in paperspace. EG. Working in mm in model space a good text height for me was 1000. By using the spacetrans command in paperspace I worked out that the text height to be used here was 9.2. This basically gave me my text in paperspace at the relatively same height as it looked in model space.
I now realize that although I can scale my text happily to the right size in all my layouts it hasn't negated the need for me to type it all in many times over. Basically, I still have to type the text into paperspace at the right scale - in this example at 9.2.
How you can type your text in once anywhere (probably model space) and then scale it in all the different viewports without having to retype it all in?
View 9 Replies
View Related
