AutoCAD 2010 :: Metric Viewport Scale Factors
May 9, 2012
When I setup my viewports for my sheet I have a viewport that I set the viewport scale to 1:5. This is not showing up correctly and zooms the drawing off the sheet. When I go into the viewport and use the zoom to scale 1/5xp the scale is correct and totally different than the viewport scale 1:5. Since all my annotative text and hatching is set to 1:5 1:10 and 1:100 the annotations do not work since viewport scales 1:5, 1:10 and 1:100 are showing up incorrect and do not correspond to the correct zoom factors of 1/5xp 1/10xp and 1/100xp.
View 7 Replies
ADVERTISEMENT
Feb 22, 2013
I am trying to organize 7 viewports in paperspace. My drawing is a metric drawing, and when I set a scale to one view port (for example 1:25) then double click into another viewport, the viewport that I origanly set at 1:25 vooms out to fit all contents in model space.
View 2 Replies
View Related
May 2, 2012
Is there a way to modify the DEFAULT SCALE LIST to show a metric scale list in an imperial template? I mean, I start a drawing using the imperial template, but i want to use the standard metric scales on paper space. on previous versions the scale list shown both imperial & metric. Now it depends of what the template is using.
View 1 Replies
View Related
Apr 15, 2013
I have a 3D part, which I want to scale down to 0.5 the size in X and Y direcions, but I don't want to scale it down in Z direction.
Is this even possible? How do I go about doing it?
View 9 Replies
View Related
Jan 2, 2014
I was recently setting up a new install of Civil 3D 2012 and was going to set the default coordinate system to 3TM (CM=114°W) when I realized the scale factor was set to 1.0 at the central meridian.
It should be 0.9999. I checked some others and they are all the same. I also checked the 6TM projection and it is also set to 1 although it should be 0.9992
Below is the WKT(ESRI) out of Civil for EPSG code 3401:
PROJCS["CANA83-10TM115",GEOGCS["GCS_North_American_1983",DATUM["D_North_American_1983",SPHEROID["GRS_1980",6378137.000,298.25722210]],PRIMEM["Greenwich",0],UNIT["Degree",0.017453292519943295]],PROJECTION["Transverse_Mercator"],PARAMETER["False_Easting",0.000],PARAMETER["False_Northing",0.000],PARAMETER["Scale_Factor",1.000000000000],PARAMETER["Central_Meridian",-115.00000000000000],PARAMETER["Latitude_Of_Origin",0.00000000000000],UNIT["Meter",1.00000000000000]]
Looking up the .PRJ for EPSG 3401, the published standard is:
PROJCS["NAD83 / Alberta 10-TM (Resource)",GEOGCS["GCS_North_American_1983",DATUM["D_North_American_1983",SPHEROID["GRS_1980",6378137,298.257222101]],PRIMEM["Greenwich",0],UNIT["Degree",0.017453292519943295]],PROJECTION["Transverse_Mercator"],PARAMETER["latitude_of_origin",0],PARAMETER["central_meridian",-115],PARAMETER["scale_factor",0.9992],PARAMETER["false_easting",0],PARAMETER["false_northing",0],UNIT["Meter",1]]
Win 7 Enterprise SP1 64 bit
Intel i7 3770 @ 3.40 GHz
16 GB RAM
Civil 3D 2012 SP2
View 1 Replies
View Related
Nov 26, 2011
In modelspace, architectural schematic plans sections elevations which, when viewported into paperspace drawings, are scaled to 1:100. I therefore work in modelspace with Current object scale = 1, global scale factor = 100. This makes dashed lines etc reproduce at legible scale in a drawing at 1:100.
What about when I move on to details, which in paperspace are scaled to 1:5? At present I start a new file with Current object scale = 1, global scale factor = 5. This makes dashed lines etc reproduce at legible scale in a drawing at 1:5.
Isn't there a way to achieve this, while keeping both the schematic and the detail drawings in modelspace on the same, single file?
Even the above system fails when I want to scale one elevation of the schematics at 1:50, or foundation details at 1:10.
View 9 Replies
View Related
Apr 6, 2011
i have in model one drawing, in layout i have 4 viewports, each have different scale, now.. how can i using same model and 1 layout to determine scale of dimentions per each viewport? or all viewports in same layout have same scale of dimention?
View 5 Replies
View Related
Feb 14, 2013
In paperspace I set the viewport scale to 1-1/2"=1'-0" on a ANSI D-size plot. But when plotted at (layout) 1:1, it comes out to be 1/8"=1'-0" on a engineering scale.
Explain Autodesk's logic?
View 1 Replies
View Related
Feb 16, 2012
I've always been taught to set the LTSCALE to the scale of my vport, and set psltscale to 0 (Civil Design). And it has always worked great until I came to work at an Enviromental Consultant frims, that likes to mix units and do stuff the hard way. But thats beside the point.
I've read multiple post about setting the LTSCALE to 1 or .5 and leaving PSLTSCALE to 1 or whatever. There are TONS of post about it.
The reason I'm bringing it up is because EVERYBODY in my drafting department sets the LTS to 1, then manulipates the linetype scales individually threw the properties. This drives me absoutly insane!
So if I have a drawing that the vport is to 1:80, what should the LTSCALE and PSLTSCALE be set to?
View 6 Replies
View Related
May 2, 2012
In 2012, when I click on a viewport and try and to change the scale, in either quick properties or the properties window custom scale. AutoCAD only allows the standard scale settings, not a custom one. I think this is just a matter of some setting, but do not recall it.
View 5 Replies
View Related
Jan 16, 2013
We have a number of drawings, where the views in paperspace viewports are not orthogonal to the XY plane. Is there any way that we can adjust the viewport view to a TOP view (a view aligned to the XY plane) without changing the viewport scale?
If I activate the viewport and use either PLAN or View->TOP my viewport scale is destroyed, and the view is rotated along the Z-axis.
View 2 Replies
View Related
Oct 25, 2013
I'm sure I had linetype scaling updating automatically after a change of viewport scale - perhaps it was a previous release of AutoCAD. Why must I now keep pressing REGENALL to update the linetype scale?
View 2 Replies
View Related
Dec 27, 2011
Can i set my drawing in 1:160 metric scale..... because that one scale is not in CAD.........
View 9 Replies
View Related
Jun 9, 2013
where should i set the scale in the page setup manager or in the layout after i double click on the viewport i get the scale in right corner.
and iam working on the metric units.
View 4 Replies
View Related
Jun 20, 2013
I'm working on a project for work where we were given DXF files for a drawing. So I attached this file into AutoCAD at a scale factor of 1. The drawing was originally drawn in metric at 1:200. However, I am working in an imperial file with many other drawings in it as well. How can I scale this drawing up to the right scale in imperial in model space?
View 9 Replies
View Related
Jun 26, 2009
am in the process of setting up a standard file for all designers to use our local office. This file will have most of the styles created for profiles, alignments, surfaces, profile views, etc... as mostly specified by the customer and industry standards.
I am having trouble maintaining the correct annotation scale in the viewport in paperspace and when plotting.
The attached word document has 3 figures. Fig 1 shows the correct viewport scale and correct annotation scale. Fig 2 shows how the annotation scale abruptly changes during the plotting process. This abrupt annotation scale change sometimes happens during the regen process or when I switch from layout to model space and back to layout.The annotation scale goes from 1:1 to 1:40 just as in the viewport. This change in annotation scale is not supposed to happen because I want to preserve a certain plotting height for my text versus a viewport scale by using various annotation scales.
I have researched the procedures for annotation scale and have not found any info related to this "abrupt change in annotation scale".
Curiously , this abrupt change in annotation scale does not happen if the text does not belong to any styles within Civil 3D. Stand alone text stays at the correct annotation scale and is not affected in the same way.
View 9 Replies
View Related
Feb 9, 2012
I have imported a ISO Shipping container but the scale is to large. How can I scale it down to architecture setting standard not metric. When I try to use the scale option all it does is makes it larger? I have not search yet do to time restrictions.
View 4 Replies
View Related
Jun 29, 2011
I've been working on several projects that require drafting in metric units and I'm having difficulty inserting block dwgs. into my working drawing at the correct scale.
My block drawing is set to millimeters. I've drawn my block and measured it. All is ok.
UNITS = milimeters; INSUNITS = 4
My working drawing is in millimeters. All line work is dimensioning accurately.
UNITS = milimeters; INSUNITS = 4
When I insert the block, it comes in extremely small. When I click on the block properties, it says it's units are in millimeters and the scale is 1. As it should be correct? except for the fact that its about 25x smaller then it should be. This leads me to believe there is an inch insertion factor some where.
To add to the conundrum, if I xref the block dwg into my working file, it comes in at the correct size. Is there an alternative block insertion scale factor setting that I'm not seeing?
View 2 Replies
View Related
Oct 3, 2012
I'm new to autocad and came from Metric system country. now I have hard time switching to Imperial system.
1- is there any comparative scale factor between metric and imperial? for instance 1:20, 1:50, 1:250 and so on, compare to what in imperial?.
2 - in the unit dialogue box, if i use metric i only can choose Decimal not any other options like Architectural , engineering..etc. right?
3- if I want to draw in cm or m not millimeter I mean input my distance in cm or m while drawing how to do it?
4- if I want to open a metric drawing in a imperial model space how to switch from M to inch.
View 9 Replies
View Related
Sep 20, 2011
I have created a project in a metric template, then found that the scale factor is haywire. Is there some way to rest the template with out loosing my work or changing anything other than the physical line properties?
Second, I have loaded the same file onto another students file who's scale factor is A OK and metric. My file LOOKS fine but when i start to add lines or dimension all the properties are imperial.
View 6 Replies
View Related
Mar 29, 2011
I have a Viewport set to scale 1:100 and the Viewport is locked.The Annotation Scale displayed in the Viewport was 1:50.
When I clicked on the Synchronize Icon beside the Viewport Scale, the Viewport Scale changed, even though the Viewport was locked.
I was expecting the Annotation Scale to synchronize to the Viewport Scale.
Is this how it is supposed to work? and why does a locked Viewport Scale change?
View 2 Replies
View Related
Nov 8, 2013
I have a drawing with several layouts, and in one particular layout only, I want the text to be smaller than the annotation scale would dictate (the viewport is 1"=300', but I want the text to display at 1"=50' annotation scale).
I tried selecting the viewport and changing the "annotation scale" property to 1"=50', then the "standard scale" property to 1"=300'.
Strangely, this seems to work for a bunch of MText objects I have in the drawing, but it won't work for an alignment station label group or for a particular linetype...for some reason, those two things insist on having their annotation scale equal to the viewport scale.
I tried messing around with the alignment station label group's style but couldn't figure anything out. As far as the line/linetype, I'm completely at a loss why that one wouldn't change.
View 3 Replies
View Related
Sep 6, 2013
AutoCAD 2013 2D - when scrolling the viewport scale list, the viewport zooms with each scale instantly.
View 1 Replies
View Related
Jan 8, 2013
how to scale out these drawings. I have a CAD drawing using metric scale. This drawing has multiple title blocks. and each title block has its own scale. 1:500, 1:50, 1:150, 1:75. Now I make a block out of each title block and scale them out to find out if they plot out on the same sheet, and they do. Now, I still can't find out the scale factor to print them out to scale. I tried using using the scale shown in for each drawing for example 1:500 and it is super small when I do a print preview.
View 7 Replies
View Related
May 9, 2013
When converting metric 3d polylines to feature lines with units set on metric, drawing properties metric and using the australia/new zealand settings and command "create featureline from objects", for some reason the resulting 3d featurelines end up imperial?
View 2 Replies
View Related
Jul 27, 2012
I would like to get a dwg file of the metric sheets, A0, A1, A2, A3, A4. I have seen these in the past, as a template in autocad but can't find them in AutoCAD2012. I need them with titleblock intact as I need to copy their format, and I would find it easier to just rearrange an existing sheet. I need the A4 as soon as possible.
View 2 Replies
View Related
Apr 1, 2012
I am updating a drawing that someone has sent me. The drawings are to be scaled in 1/2"=1'-0", but the drawings are all done in metric. So I reset the scale list and set it at 1/2"=1'-0" in paper space ( the paper size I am working with is 8.5" x 11") when I click on the 1/2" scale my drawing becomes huge and I cant see all of it. In page setup manager I have the plot scale at 1:1 and right below that it says 1 mm and under that 1 units. In model space the drawings have been done in 1:100.
View 9 Replies
View Related
Sep 13, 2013
We have some machines which seem to work in imperial maesurement a dn others which work in metric. it is frustrating when trying to insert a map block that is metric and is inserting into a drawing which is set up as imperial. We have tried using the - dwgunits to change to mm, and then using insunits , insunitsdef source and insunitsdeftarget to 0, this works when the PC is currentyl in use. when shut down and restarted it reverts back to imperial setting.
Am i right in thinking this is something that needs to be done at the software installation stage to make it default to metric everytime?
View 3 Replies
View Related
Feb 28, 2012
If you draw in decimal how do you plot in a 1:100 etc scale, i.e. how to plot a metic, scaled drawing.
View 1 Replies
View Related
Oct 18, 2011
I am using 2012 and i would like to enter my dimensions in imperial into a metric drawing with autocad doing an automatic conversion. So let's say i write this:
12'-8-1/2"
Autocad has to take it like that into the metric drawing then, he has to convert this to 3873.5 mm. Is there a code i can put into some autocad file to make this software work like that?
View 9 Replies
View Related
Mar 17, 2011
When I scale a viewport, I normally type in the scale I want into the Viewports toolbar. So if I want the viewport to be 1 to 25, I type in "1:25". I have done this for years. Now all of a sudden, I have started a brand new drawing, setup the company border as A1. Then typed in "1:25" into the toolbar, and it zooms RIGHT in so you cannot see the drawing. But when I use the old fashioned command:
zoom - scale - 1/25xp
It works perfect. Why this is happening with the toolbar?
View 9 Replies
View Related
