Is it possible to clone a 'master' object so that when it is altered all the clones are similarly updated? (or, rather than a master object, they all update whenever any of the others are changed?)
View 3 RepliesAny way to turn an object that has been used as a master (parent object) or its resulting clone back into a normal object?
View 10 Replies View RelatedIs there a fundamental difference between a clone of an object and it's duplicate?
Like does one maintain some more attributes than the other, if it is the same why then two different names for the same thing?
One more question,
I see my name and in blue besides it (no PMs) what does that mean?
4621.CorelDRAW Clone Bug.mp4
Trim the master object and the cloned object gets deleted.The master object cannot be directly trimmed, so I grouped it with another object, which seems to enable the shaping tools. check if this behavior exists in X5 also.
I have inserted a clip about the problem. Maybe other users and the Corel staff will check it out.
In Xara P+Designer 6 I can select an area to clone, then edit that selection with the Selector Tool.
I don't seem to manage that in XD 7 doing the identical thing, well, attempting to. Am I not doing something that I should be doing, for it to do the same as in Xara D6?
I can edit with the Shape Editor tool, but not rotate with the Selector Tool.
I want create an object. A 0.5 inch hole for instance. I want to place this object into a drawing or mutiples of this object in my drawing. Two things i would like to do. If i decide i want to change the hole to 0.25 inches i want to change one instance of the object and all instances to change automatically. Second is that if i scale the drawing up in size I would like all the 0.5 inch hole to remain at 0.5 inches.
View 8 Replies View Relatedunder Photo Clone Tool, there are a few comments, which I'm not sure if they're conflicting or I'm not reading them correctly, but I cannot seem to be able to change the clone shape...:
"After you've drawn your freehand clone shape, you can adjust the smoothness of the line. This is exactly equivalent to the Freehand tool smoothness control. This is only active immediately after you've drawn the clone shape. If you edit the clone outline using the other tools such as the Shape Editor, this control become disabled."
and
"Clone shapes are normal vector editable shapes, and once selected you can switch into any of the normal line or shape editing tool to make further adjustments of the outline."
and
"A photo with clone edits, is stored as a new 'Photo Group' structure. This acts like a normal photo for many purposes (you can resize it, rotate it, enhance it etc, and it will act as a single photo object). But using 'select inside' (Ctrl+click) or using the Page & Layer Gallery to view the group structure, you can select and edit the individual clone objects within the Photo Group."
I am trying to edit the Master Page in Corel Draw X4. However I can't find how to list it in the obect manager. The first image shows the Object Manager as I see it.
The second image shows an example of the Object Manager as people have posted in other discussion topics.
How do I list all pages within the Object Manager as shown in this second example, and have the + and - buttons to expand the selection ?
Script to clone an object along a spline so that if i modify that spline vertices all the clones are repositioned automaticaly?
I use to apply a Path Constraint to initial object position and then i call Tools|Snapshot to clone it, but this works just for distribute the clones. The path is relationed just to original object, not to the clones...
I would like to clone a cylinder along a Line, but not with a linear spacing between the cylinder, but center on the vertex of the line (see image).I have trying with the spacing tool, but I can't do that I want...
View 4 Replies View RelatedSo simple question. How to clone an object by a specific distance?
e.g I want to clone an object by 200mm on Y cleanly (and make 10 copies)
i7 2600 3.4ghz/16gb DDR3/GTX 560/2x DELL U2311H 23''
I have two open drawings, a source and a destination drawing in ACADI have different layers and linetypes in each drawingI need to get the objects on a specified layer in the source drawing and copy them to the destination drawing, but ensure that they are put on a specified layer in that drawing which differs in name from the original drawing.
I've tried coming at this a few different ways, but can't really seem to come a conclusion on how to do this. WBlockCloneObjects, of course, allows me to clone the items to the new drawing, but in doing so, drags along all the layers and linetypes with it which I don't want "contaminating" my new drawing. I'm trying to keep the conversion as clean as possible. I can't pre-change the layer name or linetype, etc as the destination for these values doesn't exist in the source drawing.
Is there a way to create a new entity (an anonymous one, independent of the source ObjectClass that I need so I don't have to create multiple routines to handle each one), not attached to a DB, copy the values from the source DB entity and then modify the layer, linetype, color etc before appending the entity to the destination database?
Here is my code for what I have, but since I don't really have a clue where to turn with this, all this really shows at the moment is a straight cloning of the objects from one DB to another. As a side note, I'm working in Civil 3D 2011 and when WBlockCloneObjects is called an "AutoCAD Map Messages" window appears with no messages in it.
Public Function CopyLayerContents(ByVal acdocSource As Document, ByVal strSourceLayer As String, ByVal acdocDest As Document, ByVal strDestLayer As String, ByVal bCopyBlocks As Boolean) As Boolean
Dim bComplete = False
Dim acSourceDB As Database = acdocSource.Database
Dim acDestDB As Database = acdocDest.Database
[code]........
When I am using clone stamp tool the object moves preventing me to use the tool. How can I prevent the object from moving?
View 1 Replies View RelatedI have just discovered after installing CorelDraw X6 update 3, that opening previous files containing cloned objects results in:
I should add that this is far more than a minor irritation. We have thousands of files with cloned objects which need to be accessed and modified over the next few weeks - it will be devastating if there is no quick workaround or fix.
Could not use the clone stamp tool because the area to clone has not been defined (option-click to define a source point). this is what shows up in the command box when ever I click to start to pick the spot i want to use as the clone. makes my cloning tool useless. I have reset the tools restrted my computer.
View 1 Replies View RelatedHow do I change from clone pattern to clone stamp
View 1 Replies View Relatedclone tool has worked fine, but now it does not select an area to clone from?
View 1 Replies View Relatedhow to add an object to a group?
As I remember somewhere read that there is some way of it without ungrouping, however now reading the Designer Pro help it seems that is needed
To add more objects to a group
Select the group.
Ungroup ("Ctrl + U")
Select the extra objects.
Group again ("Ctrl + G")
Basically this group is a repeating object on several pages so maybe would not touch that with ungrouping, but of course if there will be no other choice
Setup: Designer pro 6.1
How to add noise?
I looked up `noise' in help file and it mentions distortion filters but for some unimaginable reason... does not mention where they are.
Ok, looked up `distortion'... It tells about distortion filters but again... Showing an almost insane way to organize.... again it is not mentioned where they are.
how to add noise to an object? The help file has failed its most basic role... and has left it to my imagination as to where these filters may be.
Import a photo image which is, for example, 100px high by 500px long. Now apply a simple fade transparency from the left edge to 100% transparent 100px in from the left edge (i.e. 400px of the image's length is now 'invisible').
Export this as a png and then import this png. It will still be 100 x 500 - can you tell Xara export the image truncated down just the 'visible' portion (i.e. 100 x 100)?
How to make a Contour object transparent? In below example is set a 1 step contour on the star, setting transparency the yellow is transparent but the grey not.
Contour_Transp.xar
I am aware that the star could be turned to editable shape, after clone and subtract so the transparency could be controlled on both shapes, but is there maybe some other way?
Also could be a way of course to set outline for the star and not contour, but I do not like as in that case the line half inside and half outside of the shape.
Just a question about adding objects to an arc instead of a whole circle for example using a hearts brush. I draw a circle, convert it to a shape and then bisect it with a line that has also been converted to a shape then I slice and break shapes and now I have a perfect arc but when I go to my brushes and try to add my hearts brush to the arc it like doubles the hearts. Is there anyway to overcome this so that I only have a single row of hearts on the arc. By the way I'm using XaraXtreme Pro 5. T
View 6 Replies View Relatedi want to export only a part of an object, not the whole image or object; in photoshop & fireworks for this issue i have the slice tool; so i can exactly export what i want.
is there also a similar option in xara designer; if not how do you it?
My "Magic Snap"[magnetic object snapping] has vanished/stopped working. Turning the magnet icon on and off does not do anything .I am using the latest Xara Designer Pro version [7.1.1.17261]. Is there any way to get it back without re-installing? I'm tired of having to re-install every time something goes wrong [which is kinda frequent]. I don't like having to reset the xara function icons each time [I use a different arrangement than the garden variety supplied].
I am using an i5 processor and have 8 gigs of memory running with Windows 7 OS.
How do I put a nice black outline or border around a single object? using the glow from shadow tool but that ends up as a very jagged outline.
View 9 Replies View RelatedIs it a bug or what? Why can't I centre an object to the page in DP6? It's always off by about 5 pixels. I have to manually adjust it every time.
View 7 Replies View Relatedis it possible to use the fill tool twice for an object, because i want to make 2 effects and the problem is, if you made it first time and click to make a fill effect second time, the first effect dissappears.
View 9 Replies View RelatedThe attached example shows an enlargement of a object that represents the result of a scanned hand drawn shape.
I would like to be able to click one of these objects and apply a fill to the interior. I have too many of them to create a companion object for each and align it.
1) took a picture how a sunset looks at all above water
2) drew a rectangle and reproduced around the color transitions of the sun as an Elliptical fill
3) drew a rectangle for the water, applying fractal fill and transparency Stained glass to reflect the sun maybe, after feathered the edges
And here would be the question, it seems a horizont of the water is always rather a sharp line at sunsets, and in the meantime my water is feathered So how to make a trasparent feathered object on one side sharp, but in other way staying transparent feathered. My first thought was to Ctrl - K cloning of course and make it almost a line, but maybe there is one step method.
I would like to know what are all the duplicate options we have in Xara 6 since I don't see any duplicate windows?
1. I can right click and drag (But not exact when I want to leave margins between several objects.)
2.Ctrl + k (makes a duplicate object over its self.)
3.Ctrl + alt + d (Makes a copy of the object in a diagonal direction.)
...what I need is something like illustrator were I can copy an obect once and the next copy object I copy using ctrl d is copied in the same direction and spacing as the previous one. (I hope I'm being clear.) How do I do this in Xara? I've been using this software since a few days ago and I already feel very comfortable using it.
Is there any way to control which is the dominant object when aligning? Or, to establish to which object the others align? Like in CorelDraw. It seems quite arbitrary: some times all the objects move but on occasion only one moves. I can' see any system to apply.
View 3 Replies View Related