The attached example shows an enlargement of a object that represents the result of a scanned hand drawn shape.
I would like to be able to click one of these objects and apply a fill to the interior. I have too many of them to create a companion object for each and align it.
is it possible to use the fill tool twice for an object, because i want to make 2 effects and the problem is, if you made it first time and click to make a fill effect second time, the first effect dissappears.
View 9 Replies View RelatedI have Designer Pro 7. Is there a way to get the outline of an object to take on the graduated fill transparency of an object? The line goes transparent with the object's fill when a linear transparency is applied, but remains opaque with a graduated one. I understand that I could turn the outline into an object and then apply the transparency but if I have to edit the object later, I would have to repeat the process.
View 4 Replies View RelatedAs a Realtor I need to be able to show both exterior views through windows as well as the interior space. I have a Sony cybershot camera but cannot find any settings to allow for this. Is there a way to correct photos on Photoshop?....or do I need a special camera/lens or what?
View 10 Replies View RelatedI just added a fill/texture to an image and now when I create more objects, the fill is still there. How can I re-set the fill gallery back to no-fill?
View 3 Replies View RelatedIm making some little buttons with filled backgrounds. Below is an example. Is it possible to adjust the resolution of the fill, lets say smaller, to make it look more crisp on the button?
[URL]
The above looks nice, but the one below, this is suppose to be snow but the resolution is so large you cannot tell what it is.
[URL]
I am having some trouble with a file in Illustrator CS6. Within a layer, when I add a fill to an object, the fill doesn't block out the object paths beneath. For instance, say I have a square object overlapping a circle object in Layer 1. The square object is above the circle in the layer. When I add a fill to the square, the circle stroke still shows through the square even though the overlapped part should be blocked out by the fill. The square is set to normal visibility, and I have made sure that there are no duplicate paths that would account for what I am seeing. (I.e., it's not a case where there's a second identical circle path that is on top of the square, so that it remains visible in spite of the fill.)
Other details:
- I'm mainly working with a white fill, but the problem is the same with fills of any color
- When there's a fill color in the circle path as well, the circle's fill color *is* blocked out—just not its stroke.
- I have restarted Illustrator and restarted my computer and these have not changed anything.
- There are other layers within the same document where the normal layering rules work.
- I tried copy/pasting some of the problem objects into a new document, and in the new document, the fill works properly.
- If I move the problem objects to another layer, then the fill works as it should. But as I'm dealing with a number of paths, it doesn't make sense to create a layer for each to solve the problem.
I can't tell if it's a matter of working in too large or complex a file.
I realize that one can use a Bitmap as a Fill for some shape and that one can tile it.But is there also a way to create some Vector-Shapes as an interactive Fill for some other shape - while having the Input retain editable?
View 6 Replies View Related2 numpty questions for DPX
1. Is it possible to add more than one fill to the same shape i.e two elliptical fills to a shape.
2. When you add the shapes together how do you maintain the fills in each shape - I have 3 shapes that i have 'played with' all with one fill (so far !) when i add the shapes together they combine to form a single shape but with only one fill
I'm usilng the Xara P&G Designer 2013 trial, and having trouble doing a simple flat fill of text.
I figured out that the basic reason is that when some fonts are applied to text, the text is grayed and cannot be filled. When other fonts are applied to the same text, it starts out black, and can be filled with any color or gradient, etc.
So it seems related to a font difference--seems most common for Black or Heavy fonts--why those fonts can be used but not filled?
And if I want to use one of these fonts, how do I make it possible to fill text to which is has been applied?
URL....i dropped it into xdpx ungrouped everything extracted the france shape and tried to fill it.i check and it is definitely a closed shape.i can manipulate the outline as normal but nothing i do fills it it's definitely not transparent to remedy this i draw a square under it, select both and subtract shapes this gives me a square with france cut out of it then i draw another square inside the former square but outside the france outline i move the square underneath, select both and once again subtract shapes finally i have my shape filled as i require.
View 9 Replies View RelatedI am wondering how, for example, I could fill the letters of text with a pattern or texture or image (...) I found on the internet (google images for instance). For example, I found a knit pattern I like and I want to fill the text words with that. How would I go about that?
In general, I am having some problems getting onto how to import various fonts, textures, etc.. that i find.. I've read the instructions and can't figure out where to place the folders, etc.. Any links to very detailed instructions would be great..
I just tried to fill a page with black-filled hexagons so that they are all aligned perfectly vertically and horizontally. I duplicated and positioned as best I could by hand. Then, I used Alignment>equispace on horiz row selections then vert selections. No matter what I do, it will never be perfect with hand placement, obviously.
Is there a way to fill a page with the hexagons so that it looks like the attachment (ie everything perfectly squared in respect to the page)? I would need perfectly uniform spaces between the shapes so that it comes out perfectly squared with the page. This would be the first step I need to do in making a seamlessly tiled alpha for ZBrush.
Sometimesw you want to color the fill of a bitmap without the fuss of opening another app. For example, Bitmap files in corel color differently. Is there an equivalent to this in Xara?
View 4 Replies View RelatedI have a shape (an Open Book) that I would like to Fill the two Open (showing) Pages with Text -I thought of just making a smaller than the page text box under page shape for each page; but, then I thought I'd check with You Pros here and see if a Shape could have a 'Text' Fill...?
View 2 Replies View RelatedBackground.
About five years ago I had to prepare a series of cave maps and one of the caves was in granite. I needed to have the geological symbol for granite as a fill for use in the various cross sections. OK. I made the fill (a random scattering of "V"s) and used it. And kept the file, lets call it A.
Switch to now. I am making a map of an arch that I explored last year. The map is almost finished and I need the fill again. This is map B.
My question is how to I get the fill out of map A so as I can use it in Map B?
I know the answer is possibly very simple but not obvious to me. I have tried a workaround which involved importing the whole map A into Map B and then removing the original. This worked but seems really kludgy.
I have tried to create a linear fill and it looks fine in Xara Designer, but after exporting the image as a jpeg, the gradation does not look smooth at all, it looks rather terrible. It does not look as smooth and as seemless as work I have seen which was created using software such as Photoshop. Am I doing something wrong?
View 8 Replies View RelatedHow to fill an area with a colour in Xara 6, when that space is surrounded by different 'objects'?
So say I drew 3 separate lines to form a triangle. How can I fill that triangle with a colour? If I select the Fill Tool and choose a colour, then click in the centre of the triangle nothing happens.
If I were to do the same thing in Illustrator then it would simply create a new shape that fitted the space.
Perhaps this is not possible? Such a simple thing though, I feel I must be missing something. Is it perhaps available on Xara 7?
How do I get XXDP7 to show the fill colour of a shape?
The outline width is zero and transparent, but the pallete on the bottom of the screen fails to show the fill colour.
You can easily fix crooked photos, zoom and crop with the fill tool.
The first step is to make sure you have the rulers enabled (window>bars>rulers) then click and drag a horizontal guideline from the ruler.
Select your photo and select the fill tool, you will see that your photo is actually a vector shape with a bitmap fill. Click and drag the outer fill handles to enlarge (zoom) the bitmap within the shape and rotate as needed to straighten the image. Move the cursor over the line of the fil handles until it changes to a hand then click and drag the photo around to adjust it's position within the shape.
I've got an object that I've filled with a circular fill/gradient. Is there a button that allows me to swap the start color and end colors in one click? If this was a linear gradient I could just position the start and end points to reverse it but since its circular I must swap the start and end to retain the circular effect.
View 6 Replies View Relateda photo in xara is actually a bitmap filled shape, so if you just try applying another fill, eg linear, it will replace the bitmap completely
so what you need to do is draw a rectangle over the photo - apply the fill you want to the rectangle - and then give it a transparency of type hue
now come the reservations - hue transparency has no affect on black/white/grey-tones, so you may not end up with an even fill as you can see from the example
you may wish to contone the bitmap first... the underlying color will still affect the fill to some extent... as can be seen from the green band in the examples..
the chosen fill ramp gives a rather nice effect on the original I think, but is a bit extreme on the contones...
[I find it useful for adding gradient color to raster line art, sometimes quicker than going into a bitmap editor and painting on color whilst preserving transparency...]
at Fractal type fills how to change the fill handles asymmetrically?
Basically I am trying Angelize's fractal tutorial from Xaraxone, and on the attached picture can be seen that the end fill handles are both pulled to the left. For me they are always in 90 degrees so maybe there is some keyboard short cut to pull them individually?
I created this simple graphic with a mix of the straight line tool and the shape tool. Any color I drag on to any panel of this hat only changes the background color. I've made sure that all these lines have snapped to the appropriate edges and have tried many combinations of joining shapes and converting to shapes, etc...
I have noticed the vectors don't seem to work the same so I'm not sure this is even possible.
is there way to Fill letters of texts individually?
So for example if there is a word "HELLO", applying a linear-simple-fade fill from H to O, it handles the whole text as one. So first character is the most and the last one is the less faded.Could be done that individually the H-E-L-L-O five characters get the fade?
When I choose the Four-Part Fill, I get a rectangle. I want to change the shape of the fill by moving each of the four corner control points independently. I haven't been able to figure out how to do this. Is there a keyboard shortcut that allows one to select each control point and then move it independently?
View 9 Replies View RelatedI have created this watercolor blob shape with a tutorial and I was wondering if it would be possible to use that watercolor blob to fill a shape (let's say a circle). How can I go about doing that? I've attempted using the make pattern function in order to create a fill pattern that way, but it's just not working out for me.
View 3 Replies View Relatedi want to make a fill effect from a color to transparent and could not find any solution in xara designer; how do you do it??
see attachment made with fireworks
I know Xara provides a range a built in gradient fills (e.g. linear, spherical etc), but does it have the ability to have a gradient follow the edge of an object?
View 9 Replies View RelatedIt's not a biggy or even a buggy.
But where has the rightclick>replace bitmap function gone?
Now one needs to go through the menu>import and adding through the bitmap gallery or fill gallery adding a folder again.
For me dragging from win explorer doesn't work.
At least not adding it to an object,only adding a new photo to the page
Any good technique for applying gradual, linear perspective to textures used to fill shapes? An example will make my question much clearer (the attached drawing, both in JPG and .XAR).
The top shape is a carpet (or something) with a bitmap fill applied. I want to draw it curled, as in the bottom shape--the texture doesn't follow the contour of the object (as expected, since this isn't a 3D modelling program).
But is there some way to simulate the gradual rotation and foreshortening of a texture, to make folds and curls in fabric look more realistic?