I have a shape (an Open Book) that I would like to Fill the two Open (showing) Pages with Text -I thought of just making a smaller than the page text box under page shape for each page; but, then I thought I'd check with You Pros here and see if a Shape could have a 'Text' Fill...?
View 2 Replies
2 numpty questions for DPX
1. Is it possible to add more than one fill to the same shape i.e two elliptical fills to a shape.
2. When you add the shapes together how do you maintain the fills in each shape - I have 3 shapes that i have 'played with' all with one fill (so far !) when i add the shapes together they combine to form a single shape but with only one fill
URL....i dropped it into xdpx ungrouped everything extracted the france shape and tried to fill it.i check and it is definitely a closed shape.i can manipulate the outline as normal but nothing i do fills it it's definitely not transparent to remedy this i draw a square under it, select both and subtract shapes this gives me a square with france cut out of it then i draw another square inside the former square but outside the france outline i move the square underneath, select both and once again subtract shapes finally i have my shape filled as i require.
View 9 Replies View RelatedHow do I get XXDP7 to show the fill colour of a shape?
The outline width is zero and transparent, but the pallete on the bottom of the screen fails to show the fill colour.
When I choose the Four-Part Fill, I get a rectangle. I want to change the shape of the fill by moving each of the four corner control points independently. I haven't been able to figure out how to do this. Is there a keyboard shortcut that allows one to select each control point and then move it independently?
View 9 Replies View RelatedIs there a way to make non rectangular text boxes in Xara designer? Say I have a star shaped object in the page and I want the text INSIDE the star.
Also, is there a way to color fill a text box?
I am wondering how, for example, I could fill the letters of text with a pattern or texture or image (...) I found on the internet (google images for instance). For example, I found a knit pattern I like and I want to fill the text words with that. How would I go about that?
In general, I am having some problems getting onto how to import various fonts, textures, etc.. that i find.. I've read the instructions and can't figure out where to place the folders, etc.. Any links to very detailed instructions would be great..
I have been working on a document and reached a point where whenever I entered regular text, it showed as an outline of broken red lines (like a regular guidline). Changing fill and color etc has no effect. I can open a new document and enter text with normal results,but not in the existing document.
View 4 Replies View RelatedIs it possible to fill a shape with texts or have text follow a curved path?
I know you can do these things in photoshop and illustrator but am not sure if they can be done in GIMP!
Is there a way to convert text to an editable shape?
I have a font that I am thinking of using for a project; the font is near to what I want but still requires modification on some letters. I've tried the 'convert to editable shape' function but it has no effect. (I'm not referring to stretching or squashing or distorting the text; I need to bring up point handles.)
I am owner of the Xtreme5 Xara version (i've not already get more recents ones ! ), and I would like to know if it is possible to change the text area, not to have a squirreled shape for this text. (Or if there another method, I am interested in too !)
Very useful when you have to surround the shape of a picture, for instance...
I put a simple picture to explain easily... :
im using XXP5, i have an irregular polygon or shape which is the space between a curved shapes outline. within this irregular shape, I want to mould the textso it is stretched / destretched to fill the space yet still be readable.
i have tried to convert the text to shapes and then adjust the nodes, but i dont get any nodes making up each letter(!) the mould tool itself doesnt seem to work. the process first involves stretching the font and rotating it to roughly fit it as close as possible.
I just added a fill/texture to an image and now when I create more objects, the fill is still there. How can I re-set the fill gallery back to no-fill?
View 3 Replies View RelatedI just read the thread the thread "...plus ask about erasers" but it doesn't answer my question about combining shapes to remove unwanted portions - or at least I didn't quite understand it. Here's my issue. I've created a nice "background" image with ripples and live effects, but it has gaps, and isn'tthe right shape. I need to erase parts of it and clip it to the right shape, but every time I try to do this using the slice tool, it puts the gaps back into the image! Attached is my image and the shape I want to clip it to.
I just tried converting the ripple shape to a bitmap copy and then slicing the shape - that doesn't get me the rippled effect I want - just the shape I already have. Then, I tried just creating the water ripples in my shape - but again that leaves gaps and when I try to "slice" them away it does all kinds of weird things to the shape..
Is it possible to fill a shape with a gradient fill so it goes up to all edges and gradually get darker/lighter inwards? For example, If I have a star shape, can I have a gradient fill in the shape of a 'star'?
View 1 Replies View RelatedIm making some little buttons with filled backgrounds. Below is an example. Is it possible to adjust the resolution of the fill, lets say smaller, to make it look more crisp on the button?
[URL]
The above looks nice, but the one below, this is suppose to be snow but the resolution is so large you cannot tell what it is.
[URL]
I realize that one can use a Bitmap as a Fill for some shape and that one can tile it.But is there also a way to create some Vector-Shapes as an interactive Fill for some other shape - while having the Input retain editable?
View 6 Replies View RelatedI'm usilng the Xara P&G Designer 2013 trial, and having trouble doing a simple flat fill of text.
I figured out that the basic reason is that when some fonts are applied to text, the text is grayed and cannot be filled. When other fonts are applied to the same text, it starts out black, and can be filled with any color or gradient, etc.
So it seems related to a font difference--seems most common for Black or Heavy fonts--why those fonts can be used but not filled?
And if I want to use one of these fonts, how do I make it possible to fill text to which is has been applied?
Using CS6 for web mock ups - so lots of vector shapes.And now there are 2 ways to do a stroke, 2 ways to do a fill - in the bar at the top or the old effects dialogue box, but gradients and shadows etc are still just in the old dialogue box, not in the top bar.
Is it me or is this incredibly bad app development? Bolt on some new functionality and don't bother about the old stuff so it just becomes one big mess.Starting to use Sketch now, and really hoping they keep working on it so it makes PS redundant -
[URL]....
I'm trying to use a single image to fill a shape but not consistently in the same position or size... similar to the cup below.
View 4 Replies View RelatedI cannot find how to fill a vector shape. When I mouse over the vector mask thumbnail in the layer's pallette I only get three options, if I right click I only get blending options.
View 3 Replies View RelatedI need to fill in a rounded rectangle shape created on photoshop with an image how do i do that?
View 8 Replies View RelatedWhere can i find the 'Random Shape Fill' As it seems like a useful plugin to have.
Here is an example where it is used: [URL]
The logo I'm working on requires part of some "complex" shape.
When I use the Knife tool (with the shape selected), it doesn't split: the line down the middle is just a guideline* and when I use the Erase tool, the lines become curvy.
I'm trying to do following action using CS6 SDK:
1 Covert the selected path into chained circles
2 Fill the selected shapes with circles
All circles are of equal size, and cannot be overlapped each other.
I just tried to fill a page with black-filled hexagons so that they are all aligned perfectly vertically and horizontally. I duplicated and positioned as best I could by hand. Then, I used Alignment>equispace on horiz row selections then vert selections. No matter what I do, it will never be perfect with hand placement, obviously.
Is there a way to fill a page with the hexagons so that it looks like the attachment (ie everything perfectly squared in respect to the page)? I would need perfectly uniform spaces between the shapes so that it comes out perfectly squared with the page. This would be the first step I need to do in making a seamlessly tiled alpha for ZBrush.
Sometimesw you want to color the fill of a bitmap without the fuss of opening another app. For example, Bitmap files in corel color differently. Is there an equivalent to this in Xara?
View 4 Replies View RelatedBackground.
About five years ago I had to prepare a series of cave maps and one of the caves was in granite. I needed to have the geological symbol for granite as a fill for use in the various cross sections. OK. I made the fill (a random scattering of "V"s) and used it. And kept the file, lets call it A.
Switch to now. I am making a map of an arch that I explored last year. The map is almost finished and I need the fill again. This is map B.
My question is how to I get the fill out of map A so as I can use it in Map B?
I know the answer is possibly very simple but not obvious to me. I have tried a workaround which involved importing the whole map A into Map B and then removing the original. This worked but seems really kludgy.
I have tried to create a linear fill and it looks fine in Xara Designer, but after exporting the image as a jpeg, the gradation does not look smooth at all, it looks rather terrible. It does not look as smooth and as seemless as work I have seen which was created using software such as Photoshop. Am I doing something wrong?
View 8 Replies View Relatedis it possible to use the fill tool twice for an object, because i want to make 2 effects and the problem is, if you made it first time and click to make a fill effect second time, the first effect dissappears.
View 9 Replies View RelatedHow to fill an area with a colour in Xara 6, when that space is surrounded by different 'objects'?
So say I drew 3 separate lines to form a triangle. How can I fill that triangle with a colour? If I select the Fill Tool and choose a colour, then click in the centre of the triangle nothing happens.
If I were to do the same thing in Illustrator then it would simply create a new shape that fitted the space.
Perhaps this is not possible? Such a simple thing though, I feel I must be missing something. Is it perhaps available on Xara 7?
