I have been working on a document and reached a point where whenever I entered regular text, it showed as an outline of broken red lines (like a regular guidline). Changing fill and color etc has no effect. I can open a new document and enter text with normal results,but not in the existing document.
View 4 RepliesI am using Xara's Photo & Graphic Designer for the first time and slowly getting acclimated to the program after using Ulead's Photo Impact for 6 years.
Just one really basic question. I have three elements in my final design: two seperate lines of text surrounded by a black outline. To save this as a single graphic (.gif format), what do I need to do? With Ulead all I had to do was select all, right click and select merge as one, then simply save in whatever format I wanted to the destination of my choosing.
Is there a similar "merge as one" command in Xara or do I select each element in my graphic, then choose save from the file menu?
I have Designer Pro 7. Is there a way to get the outline of an object to take on the graduated fill transparency of an object? The line goes transparent with the object's fill when a linear transparency is applied, but remains opaque with a graduated one. I understand that I could turn the outline into an object and then apply the transparency but if I have to edit the object later, I would have to repeat the process.
View 4 Replies View Relatedhow do you create a square with a transparent fill (it has to go around part of a photograph)? I am using DP7. I can create the square with no fill, but how to get a black outline around it (to show that it's a square).
View 7 Replies View RelatedI want to put a double outline of two different colours around text, one coloured and one black. How do I do it?
View 8 Replies View RelatedExecutive summary of need: turn a color, line-and-fill Xara image into a very thin black line, no fills, no other colors.
I'm reproducing a 1930s - 1940s decal from a toy crib that we're restoring and repainting. The original decal on the headboard is deteriorated and flaking off, so I decided to reproduce it on clear inkjet waterslide decal paper. (White paper wouldn't work because of the open area between background ovals and the figure itself; here's the reproduced decal image - imagine everything not in color to be a clear area: )
However, since inkjet printing doesn't include opaque white, I need to manually paint white on the decal sheet behind the ovals and the figure to make the colors pop and to prevent the pink-painted crib background from showing through. I'd like to take the Xara image, copy it, then turn the copy into a very light black or gray line with no fills. This becomes guidelines for hand-painting
I'll print the black line version first on the decal sheet, paint white on it, then print the color version over top.How do I transform a copy of the original into my guidelines?
Is there a way to make non rectangular text boxes in Xara designer? Say I have a star shaped object in the page and I want the text INSIDE the star.
Also, is there a way to color fill a text box?
how to I outline multiple lines of text to create a filled outline around a group of text like this:
View 10 Replies View RelatedI am wondering how, for example, I could fill the letters of text with a pattern or texture or image (...) I found on the internet (google images for instance). For example, I found a knit pattern I like and I want to fill the text words with that. How would I go about that?
In general, I am having some problems getting onto how to import various fonts, textures, etc.. that i find.. I've read the instructions and can't figure out where to place the folders, etc.. Any links to very detailed instructions would be great..
I have a shape (an Open Book) that I would like to Fill the two Open (showing) Pages with Text -I thought of just making a smaller than the page text box under page shape for each page; but, then I thought I'd check with You Pros here and see if a Shape could have a 'Text' Fill...?
View 2 Replies View Relatedwhen I use the shape tool and text tool I'm getting a red dotted outline instead of the usual black outline. If I draw a rectangle it's empty, instead of shaded in? How do I put things back to normal?
View 3 Replies View RelatedI just added a fill/texture to an image and now when I create more objects, the fill is still there. How can I re-set the fill gallery back to no-fill?
View 3 Replies View RelatedIm making some little buttons with filled backgrounds. Below is an example. Is it possible to adjust the resolution of the fill, lets say smaller, to make it look more crisp on the button?
[URL]
The above looks nice, but the one below, this is suppose to be snow but the resolution is so large you cannot tell what it is.
[URL]
Is it possible to create a shape, and just outline its shape..with no fill at all? So just the lines of the shape?
View 1 Replies View RelatedWhere I can get a hold of an outline font, as in no fill. I am using AC2005, but there is only underline, bold and italic.
View 8 Replies View RelatedIs there a way to create a hollow circle (or ring) that has a fill, but does not actually fill the circle with the color, just makes the outline?
Here is an image of what I need:
I am having the above laser cut out of acrylic. The laser needs to have everything that is black use a Fill and no Outline. The way it is in the file now, there is no Fill on the circle, but there is a black Outline. If I tell it to have a black Fill and no Outline (like the laser needs) I end up with a solid black circle which the laser will engrave as a solid circle instead of the "ring".
Create new document, create rectangle, set outline to none, fill to none - and export to AI. (I use v8)The object is not exported if both outline and fill are set to none.
View 3 Replies View RelatedIs there an option or a workaround that will eliminate the white boarders in a Corel trace? Whenever I do a trace, when I move the trace off the top of the original image, I see a white boarder around each color. Is there any way - when tracing - to tell Corel to use the fill color as the border color for each element of the trace?This would make the trace immediately usable without hand selecting each color cell.
View 8 Replies View RelatedI am very confused why Outline pen and fill tool does not work, I had to reinstall, but it still does not work.
View 4 Replies View RelatedI made a path and filled it with black. When I zoom in to make anchor adjustments, the fill and the path outline are offset making it very difficult to adjust and align filled paths. This happens all the time.
View 6 Replies View RelatedIs there a way to quckly join contour lines that have been broken where the contour elevation is?
example, if this were a contour line ---------501---------
I'd want to delete the contour elevation and join the line to make a continuous contour line.....
I was wondering how to remove the fill of an object but leave the outline intact? e.g. the image here
[URL]........
if i wanted to have his outline only so he will look like this when finished
[URL]..........
I am using Photoshop CS5.
What would be the best approach to draw a mountain outline using a vector approach & fill, but be able to adjust the outline later via a vector approach? (i.e. outline shouldn't get rasterized)
So the approach would need to be able to:
* create the outline & selection with a vector based approach
* vector selection has to be effectively saved for later
* modification later should support getting access to the original handles of the vector selection (say with Pen tool) and make adjustment
* after adjustement of the vector area is made, the fill should automatically occur on the extended or contracted area
approach/which tools to use in CS6 to be able to do this?
i can find no way of doing this short of taking the pen tool and connecting all the points to get an overall shape.this gets even harder because a lot of the desks have round parts on their outline.
View 10 Replies View RelatedI have a question about sheet name field, can it be broken into 2 or 3 lines?
Our office has huge text size for drawing name, which can not be changed to a smaller one (you know the politic craps about standards).
So I wonder if there is a way to break the Sheetname field to 2,3 or 4 lines to accommodate this. So far the field is set to have one single line at best. It was good for "floor plan" but not good for "floor plan and etc, etc...."
I have a part that when I adjust its length additional fabs are needed. Now in my idw for this part I want to secure the break lines on the part at a exact distance from the end / each other to display these fabs. Is there a way to parameterize or set the break lines so they adapt to the change in length and move accordingly?
View 3 Replies View RelatedI have a question regard removing the outline from a portion of an object or making that portion invisible and still fill the object in its original shape Say for instance I have a circle or a rectangle and I converted them to a curve. I want to be able to make part of the outline invisible and still fill it in its original shape.
View 7 Replies View RelatedI am using Coreldraw 6X on a trial basis ( my previous cad is all mechanical/ 3D based such as autocad and 123D). I have a problem with an object which is basically an outline of an animal in CDR format, and cannot find a way to fill in the outline areas.
View 4 Replies View RelatedI am using Corel Draw X3 on windows XP
I have clicked something which has removed the fill and outline properties of an object which appeared at the bottom task bar.
A little paint brush told me the fill colour and a pen told me the outline properties.
How do I get them back?
I am newbie using Elements 10.
How do I draw a rectangle that only displays the stroke. That is, it has a transparent fill.
Using CS6 I have a bitmap I traced, which worked great. Now I want to create a mask similar to this horse head decal. Since the white isn't actually a shape I keep getting the error that I have to join the shapes. But it's a collection of black vectors that make up the image. What would be the best way to create an outline, or a fill that I could use to mask with? In photoshop I remember you paint a mask area.Which would be ideal. Is there a simular way to to this wiht CS6?
View 4 Replies View Related