Create new document, create rectangle, set outline to none, fill to none - and export to AI. (I use v8)The object is not exported if both outline and fill are set to none.
View 3 RepliesI am using Coreldraw 6X on a trial basis ( my previous cad is all mechanical/ 3D based such as autocad and 123D). I have a problem with an object which is basically an outline of an animal in CDR format, and cannot find a way to fill in the outline areas.
View 4 Replies View RelatedI am using Corel Draw X3 on windows XP
I have clicked something which has removed the fill and outline properties of an object which appeared at the bottom task bar.
A little paint bucket told me the fill color and a pen told me the outline properties.
I still use Corel Draw 12 and my question is is there an easy or automatic way to make the outline color of an object the same color as the fill color? I do it the hard way of trial and error until I get the right outline color from the color dock/pallette.
View 10 Replies View RelatedI have Designer Pro 7. Is there a way to get the outline of an object to take on the graduated fill transparency of an object? The line goes transparent with the object's fill when a linear transparency is applied, but remains opaque with a graduated one. I understand that I could turn the outline into an object and then apply the transparency but if I have to edit the object later, I would have to repeat the process.
View 4 Replies View RelatedI was wondering how to remove the fill of an object but leave the outline intact? e.g. the image here
[URL]........
if i wanted to have his outline only so he will look like this when finished
[URL]..........
I am using Photoshop CS5.
Is there a way to create a hollow circle (or ring) that has a fill, but does not actually fill the circle with the color, just makes the outline?
Here is an image of what I need:
I am having the above laser cut out of acrylic. The laser needs to have everything that is black use a Fill and no Outline. The way it is in the file now, there is no Fill on the circle, but there is a black Outline. If I tell it to have a black Fill and no Outline (like the laser needs) I end up with a solid black circle which the laser will engrave as a solid circle instead of the "ring".
Is there an option or a workaround that will eliminate the white boarders in a Corel trace? Whenever I do a trace, when I move the trace off the top of the original image, I see a white boarder around each color. Is there any way - when tracing - to tell Corel to use the fill color as the border color for each element of the trace?This would make the trace immediately usable without hand selecting each color cell.
View 8 Replies View RelatedI am very confused why Outline pen and fill tool does not work, I had to reinstall, but it still does not work.
View 4 Replies View RelatedResizing objects is a mess in CorelDRAW X6 when objects are outlined with Scale With Object enabled to retain proportions after resizing.
None of the tools dealing with outlines (e.g. Contour or even Outline itself) continue to work properly after resizing the object.
I strongly suggest to recalculate outline property values after resizing if Scale With Object is checked. Don't just do it hidden somewhere internally in the object model by applying a temporary scaling factor. Instead actually recalculate the actual property values if Scale With Object is checked.
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
I have a question regard removing the outline from a portion of an object or making that portion invisible and still fill the object in its original shape Say for instance I have a circle or a rectangle and I converted them to a curve. I want to be able to make part of the outline invisible and still fill it in its original shape.
View 7 Replies View RelatedI am using Corel Draw X3 on windows XP
I have clicked something which has removed the fill and outline properties of an object which appeared at the bottom task bar.
A little paint brush told me the fill colour and a pen told me the outline properties.
How do I get them back?
how to draw and big fat line - about 24 pt - with rounded ends, then give that line an outline of its own so I can change the 'fill ' - the original line colour - and get an outlined line?
And just for fun, I want the 'fill' to be semi-transparent!
Is it possible to convert outline to object in the adobe reader ?
View 7 Replies View RelatedOutline.cdr
I don't know what's wrong with the outline that I get this result.
I use this combo all the time for getting the fill I want from another object.
Is there a combo for getting the outline from another object?
What i like about this is you don't have to deselect the target object as in Right Click and Drag.
what methods use to only partially hide the outline of an object but without merging the two objects together or breaking any of the two objects apart(?)..i want to rest one object on top of the other and hide portions of the outline where the two meet, something like this: [URL]
View 4 Replies View RelatedI use Corel Draw X6.4 on a 64-bit Windows 7 PC, but since the first installation of Corel Draw X6 I have following problem:
I use millimeters as metric scale and when I create any object, the object manager states that the outline width of that object is set to 2 mm, but it is obvious that the width is only 0.2 mm. Now if I try to change the outline width to 1 mm, Corel draws the outline with a width of 10 mm instead and the object manager says that the width is even 100 mm. To solve that problem I always have pressed the Undo-button, so the width changes to the desired 1 mm but the object manager still tells me that the width is 10 mm.
CDX5: Whatever color I select for fill or outline is now set as the default color for fills and outlines without expressly setting it as such. Until now when I left or right click a color with nothing selected it allowed me to set it as a default fill or outline color for graphics, artistic text, or paragraph text. It does not do that now.
Is this a "feature" that's been added that I somehow enabled? In any event, how do I turn it off?
Set the Trace Bitmap so that the outline color defaults to the same as the fill color on the resulting curves? Currently, resulting curves have to be edited one color at a time to give them hairline outlines with the same color as the fill. It's mighty tedious for complex vector art.
View 9 Replies View RelatedHow do you color the outline of a closed object in different colors in Draw . I have a green triangle which is part of a witches hat....... I have colored the outline in the same green as the fill but I would like to keep the bottom line (curved) black to define it against the hat brim. Is there a way to keep this line black when I make the others green......otherwise I have to draw it in again.
View 5 Replies View RelatedHow can I get the same effect as this without trying to convert outline to object, Corel freezes up trying to do it.
View 6 Replies View RelatedI just upgraded to X5 the other day and started working with it. All seemed pretty normal until I drew a rectangle with a hairline and no fill. I typed in some text and went to click off of it to start a separate line of text only to find out when clicking inside this shape, and any other shape I made, it would select the shape.
View 8 Replies View RelatedI would like to know whether Corel Draw can fill a shape with another shape or object/icon so that it gets scaled to the shape size. As in this picture: [URL] ...
As you see the shape is a text/font and it's filled with diamonds (it's not simply following a path). If it's not handmade I assume the automatism works like that: there is only 1 diamond = the object, and the object gets duplicated through the entire shape and resized so it fits.
It appears Adobe Illustrator cannot do this automatically, see: [URL] ... (there's another example in the first post), can Corel Draw? I don't have Corel Draw. I am just looking for a program capable of doing it automatically.
My corel x5 opens with object properties are set with x no fill and on opening a new document and creating a shape, it has no fill.
My boss opens corel x5 and his object properties are set with x no fill but on opening a new document his properties change and a blue color shows in his fill, and of course when he creates a shape it is filled with this blue color.
Yes, he can just change the properties to x no fill each time he opens a new document but i wondered if we can change it and have it set at x no fill as the default ? I have tried everything I can think of but it seems to want to keep this blue color as the default.
How do i Fill an object with text coreldraw suite 5? Need a circle with a name to fill it.
View 2 Replies View RelatedIm trying to custom fill a curved object with a jpeg image. Im sure ive done this before with no problems but ive been doing it all morning with no success.
View 9 Replies View RelatedI need to fill the object with oblique lines of one color - strips rotated 45deg. Among them is empty, that is to be visible below the bottom (lower layer) of this texture. Somehow I can not figure out how to do it: ps textures are useless/complex and other standard off are not "leaky". So far I have dealt with manually, copy lines and trimming.
View 11 Replies View RelatedI added a patten fill to my libray, saved my default setting so it would stay, now everytime I draw an object it is automatically filled with that pattern fill...I even deleted the pattern fill from the library, saved default settings again, restarted corel, and it still fills an object.
View 4 Replies View Relatedis there a quick way to fill a circle/ellipse/polygon object with a bitmap image/ photo? I have a bunch of photos i would like to put into these objects and would like to have them filled/fitted into the objects and clipped by the outer extent. I guess a picture fill of some sort? Or a mask?
View 9 Replies View Relatedwhat is the best way to close an object consisting of multiple individual lines to enable a fill color? So far I've just been retracing the objects, but there has to be an easier way.
View 4 Replies View Related