URL....i dropped it into xdpx ungrouped everything extracted the france shape and tried to fill it.i check and it is definitely a closed shape.i can manipulate the outline as normal but nothing i do fills it it's definitely not transparent to remedy this i draw a square under it, select both and subtract shapes this gives me a square with france cut out of it then i draw another square inside the former square but outside the france outline i move the square underneath, select both and once again subtract shapes finally i have my shape filled as i require.
1. Is it possible to add more than one fill to the same shape i.e two elliptical fills to a shape.
2. When you add the shapes together how do you maintain the fills in each shape - I have 3 shapes that i have 'played with' all with one fill (so far !) when i add the shapes together they combine to form a single shape but with only one fill
I have a shape (an Open Book) that I would like to Fill the two Open (showing) Pages with Text -I thought of just making a smaller than the page text box under page shape for each page; but, then I thought I'd check with You Pros here and see if a Shape could have a 'Text' Fill...?
When I choose the Four-Part Fill, I get a rectangle. I want to change the shape of the fill by moving each of the four corner control points independently. I haven't been able to figure out how to do this. Is there a keyboard shortcut that allows one to select each control point and then move it independently?
I just added a fill/texture to an image and now when I create more objects, the fill is still there. How can I re-set the fill gallery back to no-fill?
I just read the thread the thread "...plus ask about erasers" but it doesn't answer my question about combining shapes to remove unwanted portions - or at least I didn't quite understand it. Here's my issue. I've created a nice "background" image with ripples and live effects, but it has gaps, and isn'tthe right shape. I need to erase parts of it and clip it to the right shape, but every time I try to do this using the slice tool, it puts the gaps back into the image! Attached is my image and the shape I want to clip it to.
I just tried converting the ripple shape to a bitmap copy and then slicing the shape - that doesn't get me the rippled effect I want - just the shape I already have. Then, I tried just creating the water ripples in my shape - but again that leaves gaps and when I try to "slice" them away it does all kinds of weird things to the shape..
Is it possible to fill a shape with a gradient fill so it goes up to all edges and gradually get darker/lighter inwards? For example, If I have a star shape, can I have a gradient fill in the shape of a 'star'?
Im making some little buttons with filled backgrounds. Below is an example. Is it possible to adjust the resolution of the fill, lets say smaller, to make it look more crisp on the button?
[URL]
The above looks nice, but the one below, this is suppose to be snow but the resolution is so large you cannot tell what it is.
I have exported a file from a program called Aspire (used for CNC router modelling) in 3 formats. AI, EPS and DXF. Aspire is a vector program. The file is a bunch of text that I have carved into wood using the Aspire program output (toolpaths)
Now I want to import the file into CorelDraw to cut a vinyl outline of the text so I can place the vinyl over the timber and remove the cut letters and then spraypaint the letters that are cut into the timber. If I can cut the the vinyl exactly the same size as the router has cut the wood I can stick the vinyl over the wood and spraypaint into the grooves which saves a huge amount of time to make the sign.
However, what I need to be able to do is fill all the letters in Corel Draw and get rid of the outline pen in the file as the vinyl cutter software will cut the letters twice if I have the fill and the outline but it will not cut the outline by itself. So I need all the letters just to be filled (any colour is OK) to run the program that controls the vinyl cutter.
I have imported each file type into CorelDraw (one at a time)and and in each case have tried to fill the letters but I can't get CorelDraw to fill the letters properly. Say with letter "a" it will fill the vectors surrounding the letter but also fill the centre piece of the "a" and even if I select the centre piece of the "a" separately I cannot "unfill" that bit. I can change the centre piece to white and it look like its "unfilled" but that won't work with my vinyl cutter. It will not cut out the centre piece unless I can find a way to unfill the centre piece.
Same problem with all the letters that have a vector inside another closed vector (like p,q,e,g,o etc)
I am trying to modify a bar graph that I have imported as a pdf from excel, and am having some trouble with customizing the color fill on the bars of the bar graph. When I select the object/bar and then fill with a different color, I see no change. However the menu shows the new color I selected for that particular object. Is there something weird about the type of object that the bar is when it is imported from excel?
OK I figured out that for some reason the bars on the bar graph are imported as clipping masks - very weird, you need to release the clipping mask, deselect the bar, select and delete the background shading, then fill the bar (which was previously the mask, I believe?) Why excel exports like this?
I notice something similar with the imported text labels associated with the same graph. When I select the text and change the font size, for some strange reason it can size up (say, from 10pt to 12pt) but not down (day, from 10pt to 8pt) It seems weird when I try to edit it at all really, as if the element was not a text element, is there some way to convert it to a text object? Ok this is working properly now, don't know why it was wonky before.
I have a Shape Layer in Photoshop. When the .PSD is imported as a comp, AE CS6 is layering the masks incorrectly. It requires the user to manually re-order the masks to display correctly.
is there any way to interpret PS shape layers as pixels or Illustrator vectors instead of masks? [without rasterizing in PS, of course] When AE turns them into masks, AE obviously won't update the masks if I make changes to the shape in Photoshop.)
I have a shape that was made in Illustrator. See right. It's the thought-ballon-y-looking thing.
The everything outside of the black part is transparent. I want to use this shape as a mask so that another comp will appear inside the balloon shape, but not outside the shape.
is it possible to bring in a PDF and keep the layers intact?
I have received some artwork with a cutter guide on and with over 1,700 entities all on the same layer, some of which are the same colour as the cutter guide.
It would be a royal pain trying to select the cutter guide line by line!
I recently downloaded several custom shape sets from DeviantArt. I was using them all fine for about a week, however today when I started up Photoshop (I'm using CS5) the shape sets I imported had disappeared from the list. All default shape sets are still there, and in the custom shapes source folder all are there including my downloads.
I have tried taking the files out and putting them back in the folder, opening and closing photoshop and restarting my machine, but they won't reappear. The only thing that happened yesterday was that Adobe made an apparently unsuccessful attempt to update Flash.how I can get the shapes to reappear?
I'm new to working with GIS data imported into Civil 3d as shape files. I'm working on setting up base drawings for a new project area and I have a lot of data displayed as polygons with attributes. This is nice but I would like to be able to copy these to polylines on layers that I can have a little more freedom to work with.
For example the polygon boundaries are not exactly the boundaries that I need to show and editing the borders would be nice. Is there a better alternative to tracing the polygon boundaries? I have noticed when I extract feature geometry for line strings I get a polyIine I can use but the polygons' extracted geometry is a Mpolygon with solid fill.
I have an interesting problem. I have imported a shp file from a state agency. This file contains contours for an area. When I tag the pline, it shows a "zero" elevation, but shows a numeric elevation within the DXF_ELEV feature.I am needing to convert these to pline with elevation to work on in autocad. how to get polyline w/ elevations to export from c3d?
I am placing my customer's logo by importing their graphic file (they gave me jpeg, tiff, eps, bmp). I find the background color does not match and need to know how to change it.
I like the 3D Tool but is it possible to use the 3D tool to raise the nontransparent part of an imported image while leaving the transparent part flat?
If I import an Arcview shape file into Autocad Map, why can't i plot it out from Paper Space??? I can plot out shape file data in Model Space but not Paper Space. The data is mapped to a layer, and it can be viewed in "Print Preview" but nothing comes out when i plot from paper space.
I realize that one can use a Bitmap as a Fill for some shape and that one can tile it.But is there also a way to create some Vector-Shapes as an interactive Fill for some other shape - while having the Input retain editable?
I'm usilng the Xara P&G Designer 2013 trial, and having trouble doing a simple flat fill of text.
I figured out that the basic reason is that when some fonts are applied to text, the text is grayed and cannot be filled. When other fonts are applied to the same text, it starts out black, and can be filled with any color or gradient, etc.
So it seems related to a font difference--seems most common for Black or Heavy fonts--why those fonts can be used but not filled?
And if I want to use one of these fonts, how do I make it possible to fill text to which is has been applied?
Using CS6 for web mock ups - so lots of vector shapes.And now there are 2 ways to do a stroke, 2 ways to do a fill - in the bar at the top or the old effects dialogue box, but gradients and shadows etc are still just in the old dialogue box, not in the top bar.
Is it me or is this incredibly bad app development? Bolt on some new functionality and don't bother about the old stuff so it just becomes one big mess.Starting to use Sketch now, and really hoping they keep working on it so it makes PS redundant -
I cannot find how to fill a vector shape. When I mouse over the vector mask thumbnail in the layer's pallette I only get three options, if I right click I only get blending options.
The logo I'm working on requires part of some "complex" shape.
When I use the Knife tool (with the shape selected), it doesn't split: the line down the middle is just a guideline* and when I use the Erase tool, the lines become curvy.
I am wondering how, for example, I could fill the letters of text with a pattern or texture or image (...) I found on the internet (google images for instance). For example, I found a knit pattern I like and I want to fill the text words with that. How would I go about that?
In general, I am having some problems getting onto how to import various fonts, textures, etc.. that i find.. I've read the instructions and can't figure out where to place the folders, etc.. Any links to very detailed instructions would be great..
