Xara :: Adding Brush Object To Arc?
Feb 11, 2013
Just a question about adding objects to an arc instead of a whole circle for example using a hearts brush. I draw a circle, convert it to a shape and then bisect it with a line that has also been converted to a shape then I slice and break shapes and now I have a perfect arc but when I go to my brushes and try to add my hearts brush to the arc it like doubles the hearts. Is there anyway to overcome this so that I only have a single row of hearts on the arc. By the way I'm using XaraXtreme Pro 5. T
View 6 Replies
ADVERTISEMENT
Feb 13, 2013
Is there any way to add a favorite brush stroke to the list of brush strokes, or do you always have to open the original file to access the brush stroke?
View 9 Replies
View Related
Sep 17, 2011
have to select an object under an artistic media brush object. i try hold down alt key when select the object under the artistic media object but it select the second object
View 2 Replies
View Related
Apr 27, 2013
I cannot seem to add the pen tool button.
I know there is a general way to do this but it seems to elude me at the moment. I go to the button palette and can use the tool from there but would prefer that is was on the side bar.
View 3 Replies
View Related
Oct 5, 2013
How do I go about adding a new font to my list of fonts. I need the font "TrashHandRegular". It doesn't appear in my list of fonts.
How would I import or add it on?
View 9 Replies
View Related
Jan 9, 2012
Current problem is that I've created certain colors for an art piece - basically, it's different poses of a character. I'm outlining each pose on a separate Xara page. So I've inked in the first pose, and, in so doing, created a couple of new colors, which I've named.
Those new colors do not show up in the color palette when I open a new page to ink in another character pose - the palette just defaults to its basic lineup. Is there a way to create a new color and keep that color in the palette for any and all art pieces?
View 9 Replies
View Related
Aug 28, 2011
How do I add a button that scrolls as the user scrolls - so that it is always visible? I think what I need to do is fix the absolute position of a layer, but can't see how to do that.
View 4 Replies
View Related
Aug 28, 2008
I downloaded some fills and brushes from Xara Xone, but even after reading the instructions given, I am unable to add them to Xtreme Pro 4. I unzipped and extracted the files to a folder on my flash drive. When I went to add them to Xara I could access the folder where they reside, but the files didn't come up.
View 4 Replies
View Related
Jan 22, 2011
I've just upgraded to C&PGD from Xtreme v4. Adding a small amount of noise to background images seems to be becoming more popular these days. I've seem tutorials on YouTube for PS and this technique but couldn't find one for Xara.
View 9 Replies
View Related
Jun 22, 2012
We rarely use 'custom' brushes, normally just using the standard ones that come with CS6 for photo-retouching.
We'd like to take a custom brush that is saved into another library, and copy it into the standard brush library, so we don't have to switch libraries to use that brush. Is there any way to accomplish this?
View 4 Replies
View Related
Jan 22, 2013
When I make a brush how can I save it for other projects. I have tried saving it with a template but it is gone next time I open the template.
View 5 Replies
View Related
Feb 26, 2013
Are any brush files located in the /templates/eng/brushes directory automatically loaded? Mine did that from a previous version and they survived the upgrade. New brush files seem to be ignored. Is there a regedit tweak for loading the files so that they do not have to be manually loaded? What has to happen to have a brush file recognized by the program so its brushes are an option in the brush menu?
View 4 Replies
View Related
Nov 22, 2011
Ive found a way to create a border, just adding the 3d extrude tool, and it works quite well, however adding a drop shadow to the image looks cool to. I have exported the image as a jpg, however on my siote there is this white background. How do I lose this?
View 2 Replies
View Related
May 28, 2011
It's not a biggy or even a buggy.
But where has the rightclick>replace bitmap function gone?
Now one needs to go through the menu>import and adding through the bitmap gallery or fill gallery adding a folder again.
For me dragging from win explorer doesn't work.
At least not adding it to an object,only adding a new photo to the page
View 9 Replies
View Related
May 22, 2012
I've been using Gimp for sometime now.It's a fantastic program, but I thought the area where it lacked the mostwas the brushes. It only came with a few basic brushes, and you often hadto download extra packs for that something extra. This in itself wasn't ahuge deal, although if you had brush sets more like those of PaintTool SAIor MyPaint, that would be really great. Those program don't have as much asGimp, but they have some really great brushes, which makes them fun to drawin.
My bigger concerns is adding your own brushes to Gimp via imported brushpacks. While you say you integrate all files, the brush manager is lacking.If I wish to add a few brush packs to see what they do, the brush listquickly becomes clogged. You can't seem to delete brushes without goingback into the brushes folder which you first put them in, and then deletethe files. This also means if you like a few brushes in a pack, but therest of it is useless to you, then you have to have everything, or nothing.
There is a lot to be desired in terms of the brushes, and I hope you canimprove these soon. I stand by Gimp, even though people often call it awatered down version of Photoshop, but Gimp 2.8 has been a hugedisappointment for me.
On a final note, when choosing a new brush, especially for the animatedtexture brushes you include, I think it would be useful if youautomatically went to the brushes native size. This saves time and energy,especially if you are testing out new brushes. MyPaint has this feature,and I have found it incredibly useful. This also means I can just click thebrush a second time to reset it to the default settings.
View 1 Replies
View Related
Aug 28, 2012
What I am trying to do is to have a flat vector brush in black that I can change to whatever colour I want later just be selecting the colour from the colour bar while I am working.
So. When I edit the brush I go to the fill Properties tab and select 'Local colours replace - all brush colours' and save. The trouble is that it does not seem to save this setting. When I edit the brush again it reverts to 'local colours replace - named colours' I get the same problem if I 'save as new'.
View 5 Replies
View Related
Jul 27, 2011
I recently purchased Designer Pro 7 after a trial period. During the trial, I had the default brush gallery, and had also downloaded some additional brushes. After downloading the content pack earlier this week, my brush gallery disappeared. The only brush that is available is the "normal line". All of my "galleries" are checked in the Utilities menu. How to get the brush gallery back?
View 2 Replies
View Related
Apr 16, 2013
I want to produce a brush that draws a row of buntings all attached to a rope or tape either using a graphic or a jpg. I have tried everything I know but for the life of me cannot get it to work. I can get the little flags to draw but not from a continuous line.
View 9 Replies
View Related
Dec 31, 2011
more basic notes unearthed when upgrading windows
View 2 Replies
View Related
Jun 1, 2012
I'm using P&GD2013. I draw with a wacom tablet and use the freehand brush tool in sketch mode with pressure enabled. I want to edit the properties of the brush . The help pages are quite clear except that I can't access the dialog box because the 'edit brush' button is greyed out.
View 2 Replies
View Related
Jan 11, 2012
i am wondering to add the Spot healing brush tool to lightroom so that i can clone some parts of the photo without moving to Photoshop.
View 3 Replies
View Related
Feb 27, 2012
I created a 3d model in Pro/E Wildfire and opened it in photoshop CS5. I am trying to add an image to the top of the object. When I go into the 3D (Materials) tab and then click load texture (after clicking the folder next to 'diffuse'), the texture that is loaded is very distorted.
How can I add an image to the top of a custom 3d object without it being distorted?
I have attached a few files to illustrate what I am trying to accomplish and the problem.
View 2 Replies
View Related
Jun 25, 2012
I'm making a graphic work (it's for my kid's yearbook), and I'm struggling to achieve an effect.
Here's the deal:
The attached file is an image in which I try to represent the text and graphics as if they were painted in a wood plank. I'm pleased with the effect on the surface of the plank, but I wanted to give the plank some thickness, to make it seem more like a 3d plank. That thickness effect is what has been tormenting me.
Attached File(s) Name.plank.png (499.54K)
View 5 Replies
View Related
Apr 9, 2012
how to add an object to a group?
As I remember somewhere read that there is some way of it without ungrouping, however now reading the Designer Pro help it seems that is needed
To add more objects to a group
Select the group.
Ungroup ("Ctrl + U")
Select the extra objects.
Group again ("Ctrl + G")
Basically this group is a repeating object on several pages so maybe would not touch that with ungrouping, but of course if there will be no other choice
View 8 Replies
View Related
Mar 10, 2011
Setup: Designer pro 6.1
How to add noise?
I looked up `noise' in help file and it mentions distortion filters but for some unimaginable reason... does not mention where they are.
Ok, looked up `distortion'... It tells about distortion filters but again... Showing an almost insane way to organize.... again it is not mentioned where they are.
how to add noise to an object? The help file has failed its most basic role... and has left it to my imagination as to where these filters may be.
View 4 Replies
View Related
Nov 12, 2013
I'm trying to make a video where while the video is playing a series of dollar signs are added as if someone is typing. i'm able to do this with just adding a new title with one more dollar sign each title. What I'd like to do then is show the dollar signs being deleted and then a series of red hearts are typed in its place. I can't seem to figure out how to get hearts or any picture/object in a title.
View 3 Replies
View Related
Jul 18, 2012
I have a pice of code that select MText in my drawing. It looks that it select the MText in ALL my drawing and I am interested to choose the MText that is in the Model Space only.
The piece of code that I have is:
'Adding a Selection set in the drawing
Set objSS = ThisDrawing.SelectionSets.Add("TestSelectionSetOperator")
'Using 4 filters to store in objSS -Selection Set- MText which is located in the Layer Text_MSpace
ReDim intCodes(3): ReDim varCodeValues(3)
[Code] .....
How to add a criteria to choose the MText that is in ONLY in my model space?.
View 8 Replies
View Related
Jul 10, 2013
Just wondering whether there is a way to add an object to multiple layers. For example, if I have 2 layers circles and geometries - I would like to add a circle to both these layers such that if I turned either of them on the circle would be visible.
Additionally, is it possible to Group multiple layers into a single layer, for example the above 2 layers circles and geometries and into a third or fourth layer.
View 5 Replies
View Related
Feb 1, 2011
Import a photo image which is, for example, 100px high by 500px long. Now apply a simple fade transparency from the left edge to 100% transparent 100px in from the left edge (i.e. 400px of the image's length is now 'invisible').
Export this as a png and then import this png. It will still be 100 x 500 - can you tell Xara export the image truncated down just the 'visible' portion (i.e. 100 x 100)?
View 6 Replies
View Related
Sep 10, 2013
How to make a Contour object transparent? In below example is set a 1 step contour on the star, setting transparency the yellow is transparent but the grey not.
Contour_Transp.xar
I am aware that the star could be turned to editable shape, after clone and subtract so the transparency could be controlled on both shapes, but is there maybe some other way?
Also could be a way of course to set outline for the star and not contour, but I do not like as in that case the line half inside and half outside of the shape.
View 5 Replies
View Related
Mar 23, 2011
i want to export only a part of an object, not the whole image or object; in photoshop & fireworks for this issue i have the slice tool; so i can exactly export what i want.
is there also a similar option in xara designer; if not how do you it?
View 3 Replies
View Related
