I downloaded some fills and brushes from Xara Xone, but even after reading the instructions given, I am unable to add them to Xtreme Pro 4. I unzipped and extracted the files to a folder on my flash drive. When I went to add them to Xara I could access the folder where they reside, but the files didn't come up.
View 4 Replies
I've just been to the web site and downloaded a bunch of brushes and fills that are wonderful. I used the suggested for unzipping the files and then going to the disc fills and loading the files. I only got a few to load and then I got a message that suitable files could not be found. I checked all the folders that I created and everything is in there but I keep getting that same message. The brushes are another story all together. I went to the folder and dragged and dropped the files directly into the line gallery as a new brush but I can't remember how I save each brush so that every time I exit the program I lose all those beautiful brushes.
View 3 Replies View RelatedEverythime when starting a new project I first go to 'Options' > 'Units' > 'Page units' and set it from 'Inch' to 'Pixels' is there a way to set this as default ?
Note: I'm currently using the old free version Xtreme 5 Silver because lost the paid version after a system format and register code that didn't work anymore, perhaps of newer version there an easy setting for that, on this one I haven't found it yet.
A copy whichever version of Xtreme was the last one before the flyout buttons, copy of the default toolbars?
I've used Xtreme Pro v6 since it was released with just the pointless 3D and Live Effect buttons removed from the toolbar, and always mean to get round to putting the other buttons back as they were but always seem to be too busy. I particularly dislike the gallery flyout buttons and can never find the bitmap and name gallery without spending 10 seconds or so looking for it.
Installing Xtreme Pro v7 is the prompt I needed to get the toolbars sorted out once and for all. I'm sure I can work more quickly if the buttons are where I'm used to, but just as with the keyboard I can type very quickly so instinctively know where the keys are, but couldn't write the keys in order if my life depended on it!
the new Xara Pro X9, but did happen to notice... Is there any way to get the old style drawing back like Xara Xtreme 2? In Xara Pro X9, it seems you have to drag a line to make one, where in the older versions it was click a point move click another point and it draws a line between them, it was much easier to draw lines and bend them on the fly with the older version, or am I missing a step with the new software.
View 3 Replies View RelatedI need to create a sign wave in Xara Extreme or Web Designer. I can generate it with another system I have and export that to a Graphics Stream File (GSF) or png image. Not sure if I can import either of those, though.
What I want to do once I get it into Xara is apply a color to the sine wave and fade from left to right (or vice versa).
why I am all of a sudden getting issues with importing CMYK images as per the enclosed, and how can I get around this?
Xara CYMK issue.doc
how to use PNG with transparency as "photo frame" for bitmap (photo) in Xara Xtreme Pro v5?
I'm try to design pages for photo book in Xtreme. I have set of files in PNG format as "frames" for photos. For example, I attach one (14_v.png) to this message. In another editor I can use them as "masks" for photos - in second attach (capture.png) you can see on left - usual photo, on right - photo with mask as photo frame. How I can make same effect in Xara Xtreme? I try to use different modes, substract/add shapes and other - but no luck.
I am trying to cut a piece of the enclosed text/image. It is an h and I want to simply cut the the curly part of the h at the end so I can attach it to the end of another text f, but with me using a rectangle and the Clipview technique to do this I am getting a larger space for the entire image so when I attempt to change the colour the whole rectangle's colour changes.
how I can simply trim the end/curly side of the h without getting rid of the png style effect?
How to simulate the following hand-drawn picture with Illustrator brushes and fills?
The situation would be... somebody would create a new vector drawing (i.e. made from a photo reference) with outlines and fills. With some easy steps he should be able to turn it into a vector drawing that resembles this style. It should be easy to do... maybe 2 or 3 steps. It could also work with add-ons or plug-ins or something (should work with CS4 upwards).
For some reason when I recently opened P&GD6 and opened the Fill gallery to choose a fill for an image, the majority of the fill folders would not open. Previously I could expand any of the folders to view the contents. Also, the top six folders in the Fill gallery list have (Web) after the folder name. I don't recall seeing this before either. The same folders also appear in the bottom of the list without the web designation.
How to get ALL of my fills back, or how they could have been made inaccessible? I've attached a screenshot view of the folder list that appears when I click the Fill icon. Yellow highlights at the top of the list indicate the folders with the word web after them. These are the only one that I can successfully open.
I can't I never tried out the bitmap fill tool until now lol. I was wondering if there are sites that you can get fills and add them into to Xara, I have tried a few texture files, but for what ever reason Xara does not find them when I load the directory (disk fills...)
View 7 Replies View RelatedHow do I add those CD fills to the gallery? I noticed they are all stored in a cab file with their file extensions a bit changed, so I guess I could mass rename them and add manually, but I was wondering if there is any clean way of doing it? I don't want to reinstall, because I want to keep my toolbars and other settings...
...which brings me to my second question... how do I save the layout I created? I know new version is about to be released, and I would like to be able to back the layout up somehow and import, so I don't have to go through it all manually again. Anything I can do about it? I already tried backing up the entire xara registry, but didn't work...
Well, I bought Xara Designer Pro 7 the other day, and I'm trying to get used to it. One thing it's doing that really bugs me is that when I draw a circle or an oval in freehand, the circle fills in with solid color!
View 4 Replies View RelatedI am a new user testing Xara P&GD7.
I worked through a tutorial to put some of my own images in a folder to use as fills and clipart, going through the index process etc worked fine. I couldn't see any way to save them so I hoped it would be an automatic save for such things. Unfortunately they have now disappeared. Is there a way to save my own folders so that I can use them in any document?I normally work in 8" x 8" square pages, but each time I need to go back to Options and select Units: Inches and page size: Custom and type in the size. Is there a way to save Options?
I am attempting to edit a scanned abstract drawing where many of the colors are similar, resulting in them printing as all the same shade of red. I am attempting to change some of the reds to have a greater degree of shading. I am aware that I can probably do this using masks and RGB tweaking; but it occurred to me that I can also use a drawn shape and color fill with transparency to change the shade. This worked very well; but it caused one problem I don't know how to solve.
The image I am editing is intended to be uploaded to a website named Zazzle that takes your artwork and puts it on their products. This includes anything from notecards to canvases, to clothing, to shoes, etc., etc. Customers browse the site to find products and images they like. I also have a free webpage on the site where I can promote the sale of these items with my artwork on them.
The image must be a high resolution preferably png file which can be resized greatly for the canvases or left as is for notecards and the like.
While experimenting with the size of my image, I discovered that the edits I performed stay the same size while the rest of the image increases. Is it possible to make the edited shapes part of the scanned image so they will increase and decrease with the rest of the image?
way to make a brand new preset, or do I have to load the custom brushes everytime i want to use them?
View 1 Replies View RelatedI've just made the transition from PS2 to CS3.
I used to move the ABR files to the Brush folder in the Adobe PS Program files, and then they would be accessible from the brush palette in the program. In CS3, I move them to the same place and due to the different interface, I can't find how to access them. Recently however, about 20 of the 60 brush sets have appeared in a random drop down menu.
I recently downloaded a paintbrush to use in photoshop. I have photoshop cs6.The file I downloaded is an .abr file.
I clicked on it and it opened photoshop.I can't find the brush.
There were no instructions with the file. I downloaded from a free paintbrush website.How do I find the brush?
Adding brushes and adding brushes and shapes to presets?
View 2 Replies View Relatedi purchased a symbol package online and it came with these instructions URL... that i followed to a T. the problem.,. well the symbols and the brushes do not show in library for me to use. the package name showed in the library.. but when i click on it, the list is empty. how can i get them to show in the library permanently.
by the way, when i open the downloaded package using Ai, the symbols are there and i am able to open them no problem. but i can't get them to populate in the brushes, symbols library.
is a way to change the colour of the preset brushes?
View 3 Replies View RelatedI downloaded some skin brushes which add more details to the skin after smoothing it..but how can I use it...is it used to mask the blurred layer to keep some details ?
View 5 Replies View RelatedI've been using Gimp for sometime now.It's a fantastic program, but I thought the area where it lacked the mostwas the brushes. It only came with a few basic brushes, and you often hadto download extra packs for that something extra. This in itself wasn't ahuge deal, although if you had brush sets more like those of PaintTool SAIor MyPaint, that would be really great. Those program don't have as much asGimp, but they have some really great brushes, which makes them fun to drawin.
My bigger concerns is adding your own brushes to Gimp via imported brushpacks. While you say you integrate all files, the brush manager is lacking.If I wish to add a few brush packs to see what they do, the brush listquickly becomes clogged. You can't seem to delete brushes without goingback into the brushes folder which you first put them in, and then deletethe files. This also means if you like a few brushes in a pack, but therest of it is useless to you, then you have to have everything, or nothing.
There is a lot to be desired in terms of the brushes, and I hope you canimprove these soon. I stand by Gimp, even though people often call it awatered down version of Photoshop, but Gimp 2.8 has been a hugedisappointment for me.
On a final note, when choosing a new brush, especially for the animatedtexture brushes you include, I think it would be useful if youautomatically went to the brushes native size. This saves time and energy,especially if you are testing out new brushes. MyPaint has this feature,and I have found it incredibly useful. This also means I can just click thebrush a second time to reset it to the default settings.
If you see the face iv used a smooth brush and its bringing out all these noise spots. If i try to darken a background its totally unusable. Iv never had these presets and brushes do this but the last 2 sessions iv had massive issues, Its happening on pics which i wouldnt think would have issues and have never had issues before. Lightroom 4 had none of these problems.
View 3 Replies View RelatedI am working with CS6 windows. I am having a problem when I made a brush, and add additional strokes to the same line.
Here is a pic of what is happening. You can see at the beginning of the arrow, there is a blue and pink link showing around the beginning of the arrow head. I added the pink and blue lines to the same line as the brush using the appearance tab.
Now if I add a dash to the the pink and blue lines, this is what happens... There is a little pink and blue line at the very tip of the arrow head. My dash options use for both the pink and blue lines.
My question is how to I get rid of this little line? What I am trying to do is.. use the black arrowhead on line with a stoke of 1 point black, and then under that have a 3 point stroke of white. In the image what is blue would be white, and what is pink would be black, and the arrowhead is correct as it is now. I had this same setup in CS4, and did not have that little line at the beginning.
here is my brush settings..
I'm using Lightroom 4.4 on Mac.
Having an issue where all brushes and graduated filters are adding a warm yellow tint, no matter what the color settings are for the brush. The tint persists, even if I convert the image to B&W within Lightroom.
I cannot seem to add the pen tool button.
I know there is a general way to do this but it seems to elude me at the moment. I go to the button palette and can use the tool from there but would prefer that is was on the side bar.
Just a question about adding objects to an arc instead of a whole circle for example using a hearts brush. I draw a circle, convert it to a shape and then bisect it with a line that has also been converted to a shape then I slice and break shapes and now I have a perfect arc but when I go to my brushes and try to add my hearts brush to the arc it like doubles the hearts. Is there anyway to overcome this so that I only have a single row of hearts on the arc. By the way I'm using XaraXtreme Pro 5. T
View 6 Replies View RelatedHow do I go about adding a new font to my list of fonts. I need the font "TrashHandRegular". It doesn't appear in my list of fonts.
How would I import or add it on?
Current problem is that I've created certain colors for an art piece - basically, it's different poses of a character. I'm outlining each pose on a separate Xara page. So I've inked in the first pose, and, in so doing, created a couple of new colors, which I've named.
Those new colors do not show up in the color palette when I open a new page to ink in another character pose - the palette just defaults to its basic lineup. Is there a way to create a new color and keep that color in the palette for any and all art pieces?
