Xara :: Any Way To Get Old Style Drawing Back Like Xtreme 2
Aug 20, 2013
the new Xara Pro X9, but did happen to notice... Is there any way to get the old style drawing back like Xara Xtreme 2? In Xara Pro X9, it seems you have to drag a line to make one, where in the older versions it was click a point move click another point and it draws a line between them, it was much easier to draw lines and bend them on the fly with the older version, or am I missing a step with the new software.
View 3 Replies
ADVERTISEMENT
Oct 16, 2013
Everythime when starting a new project I first go to 'Options' > 'Units' > 'Page units' and set it from 'Inch' to 'Pixels' is there a way to set this as default ?
Note: I'm currently using the old free version Xtreme 5 Silver because lost the paid version after a system format and register code that didn't work anymore, perhaps of newer version there an easy setting for that, on this one I haven't found it yet.
View 9 Replies
View Related
May 31, 2011
A copy whichever version of Xtreme was the last one before the flyout buttons, copy of the default toolbars?
I've used Xtreme Pro v6 since it was released with just the pointless 3D and Live Effect buttons removed from the toolbar, and always mean to get round to putting the other buttons back as they were but always seem to be too busy. I particularly dislike the gallery flyout buttons and can never find the bitmap and name gallery without spending 10 seconds or so looking for it.
Installing Xtreme Pro v7 is the prompt I needed to get the toolbars sorted out once and for all. I'm sure I can work more quickly if the buttons are where I'm used to, but just as with the keyboard I can type very quickly so instinctively know where the keys are, but couldn't write the keys in order if my life depended on it!
View 3 Replies
View Related
Aug 28, 2008
I downloaded some fills and brushes from Xara Xone, but even after reading the instructions given, I am unable to add them to Xtreme Pro 4. I unzipped and extracted the files to a folder on my flash drive. When I went to add them to Xara I could access the folder where they reside, but the files didn't come up.
View 4 Replies
View Related
Feb 11, 2014
I need to create a sign wave in Xara Extreme or Web Designer. I can generate it with another system I have and export that to a Graphics Stream File (GSF) or png image. Not sure if I can import either of those, though.
What I want to do once I get it into Xara is apply a color to the sine wave and fade from left to right (or vice versa).
View 9 Replies
View Related
Sep 28, 2012
why I am all of a sudden getting issues with importing CMYK images as per the enclosed, and how can I get around this?
Xara CYMK issue.doc
View 6 Replies
View Related
Jul 20, 2011
how to use PNG with transparency as "photo frame" for bitmap (photo) in Xara Xtreme Pro v5?
I'm try to design pages for photo book in Xtreme. I have set of files in PNG format as "frames" for photos. For example, I attach one (14_v.png) to this message. In another editor I can use them as "masks" for photos - in second attach (capture.png) you can see on left - usual photo, on right - photo with mask as photo frame. How I can make same effect in Xara Xtreme? I try to use different modes, substract/add shapes and other - but no luck.
View 9 Replies
View Related
Jul 1, 2013
I am trying to cut a piece of the enclosed text/image. It is an h and I want to simply cut the the curly part of the h at the end so I can attach it to the end of another text f, but with me using a rectangle and the Clipview technique to do this I am getting a larger space for the entire image so when I attempt to change the colour the whole rectangle's colour changes.
how I can simply trim the end/curly side of the h without getting rid of the png style effect?
View 9 Replies
View Related
Nov 26, 2013
How to get the default dimensions style "STANDARD" back into a drawing after it has been purged? I accidentally purged it and now I want it back. .
View 7 Replies
View Related
Jun 2, 2011
My company just got all new computers and upgraded out AutoCAD to 2012 from 2009. And every single drafter has complained to me that the new Array is terrible. Basically, it seems to take 10 times as long to set up and array as it used to and now it's linking all of the objects together as a group which is absolutely terrible for what we do especially when we are making 4 or 5 columns or hundreds of objects. I cant find any classic or legacy array commands.
This really needs to be put back in because right now everyone is asking us to put AutoCAD 2009 back on the computers, and the whole reason we bought new PCs is because they couldn't run anything after 2009 without being too slow to be productive.
View 9 Replies
View Related
Mar 13, 2013
How to get back the Visual style which has been disabled?
View 2 Replies
View Related
Nov 6, 2012
as I work on a design how do I go back to change a font size and style
View 1 Replies
View Related
May 9, 2013
I'm taking over the development of some Autodesk addins that are used to parse a drawing to bring back text from the drawing, namely title block and bill of materials information. I have another process that runs and reads the meta data for the drawing itself that gets run from Vault before checking in the drawing. I need to know if I can combine these two processes such that I can parse the drawing outside of AutoCad. Is this possible?
View 3 Replies
View Related
Jul 9, 2011
For some reason when I recently opened P&GD6 and opened the Fill gallery to choose a fill for an image, the majority of the fill folders would not open. Previously I could expand any of the folders to view the contents. Also, the top six folders in the Fill gallery list have (Web) after the folder name. I don't recall seeing this before either. The same folders also appear in the bottom of the list without the web designation.
How to get ALL of my fills back, or how they could have been made inaccessible? I've attached a screenshot view of the folder list that appears when I click the Fill icon. Yellow highlights at the top of the list indicate the folders with the word web after them. These are the only one that I can successfully open.
View 5 Replies
View Related
May 15, 2013
i've been plaing with my CUI and found there were a lot more visual styles than i thought so added a few to the dashboard to try out. trouble is, a few have similar names and the same icon and now my realistic that i liked is not available.
now it's kinda semi-transparent.... before it was totally opaque. the same with my 'conceptual'...i can see far too much geometry.
btw i don't have a personal CUI or whatever the procedure is....i just modify the main one when inclined.
i've made a toolabr with ALL the listed visual styles on it and gone through them all but none of them gets it back to the opaque version.
^^^ this is in model space only. viewing from paper space it's the same as it always was.
View 8 Replies
View Related
Jul 27, 2011
I recently purchased Designer Pro 7 after a trial period. During the trial, I had the default brush gallery, and had also downloaded some additional brushes. After downloading the content pack earlier this week, my brush gallery disappeared. The only brush that is available is the "normal line". All of my "galleries" are checked in the Utilities menu. How to get the brush gallery back?
View 2 Replies
View Related
Nov 21, 2013
I am wondering if it is possible to do a style update (or style update check) upon open of a drawing?
The example would be that I have stuff made from way back that the colors/dimension sytles ect dont match the current standard and upon opening a file where they are not current, it would either prompt to update immediatly OR update automatically with no prompting (preferred method).
I am doing a massive amount of updates from old files recently and to save myself 1 - 3 clicks per drawing would be wonderful.
View 5 Replies
View Related
May 25, 2013
Should be a simple question. Using Designer Pro X I load a PNG file. I then do nothing except "save as" also in PNG format.
My expectation was I would get the same file. Instead it seems to have changed the resolution and now looks terrible.
An ordinary graphic program like paint.net or photoshop would save the same file back to disk.
There must be something I am failing to understand about Xara. How do I edit a bitmap and have it save back in its original resolution?
View 3 Replies
View Related
Feb 4, 2012
how to fill areas whit color-crayon style?
View 5 Replies
View Related
Mar 2, 2012
How do I put a rotated drawing back to level, I would like to do it using 2 pick points on a line I want to be horizontal
View 9 Replies
View Related
Jan 9, 2014
Not sure how to word this question correctly. I saw a co-worker do a 'temp-save' on a drawing, mess around with drawing, and then come back to the spot in drawing where he had 'saved' to essetially deleting all the stuff he had done. I cannot remeber what he used to mark this and then be able to come back, but if he liked the edits he had made, he could just keep drawing.
View 2 Replies
View Related
Apr 8, 2012
How can I screen back an aerial that is being x-referenced into a drawing?
View 5 Replies
View Related
May 28, 2012
I just added a fill/texture to an image and now when I create more objects, the fill is still there. How can I re-set the fill gallery back to no-fill?
View 3 Replies
View Related
Sep 14, 2012
In Civil 3D 2013 I'm attempting to import styles from another drawing. Whenever I select the Import button under Manage > Styles I get a warning box pop up that says "The drawing has unsaved modifications. Please save the drawings and then perform the style import again".
This occurs even after I hit save or reopen the drawing.
View 5 Replies
View Related
Nov 20, 2013
When i try and plot my 3D model in the Hidden style, so it simply looks like a black line drawing the plot comes out weird. The plot for some reason adds a thick black line around my entire plot, and makes all the other lightweights look faded out. How can i fix this??primary bar 3-Layout2.pdf
View 1 Replies
View Related
Mar 4, 2012
changing text style in a drawing. Let's say there is a drawing where the font style is standard, or the standard is overwritten in the text box (different size or font). I want to create a new text style which uses a new text size and font.
If i select the text which was created earlier and switch text style to the one i just created only the size of the text changes not, and the font remains the same.
But if i enter the text formatting box select the text and in style i select the one i created (even though is already selected) the font will change as well. The problem with this solution is the time needed to change every text in a large drawing.
If i use MATCHPROP the same thing, the size of the text will change but not the font.
Is there a way to change both the size and font of the text fast and easy?
View 2 Replies
View Related
May 18, 2012
I created a new dimension style in a drawing. But i can't find this new create dimension style in othes drawing. I am wondering how can i create my own dimension style and could be use in every drawing as my own style?
View 1 Replies
View Related
Jan 12, 2012
why I can't export the "Distance 1" attribute out of thsi drawing using the ATTOUT command. I need to build a series of constrained drawings using Dynamic blocks so I can send info from an Excel spreadsheet back and forth bewteen a drawing. I think I'll have to buy a 3rd party utility for that but for now, how to simply get the info out of ACAD and into Excel thsat would be a great start.
View 2 Replies
View Related
Aug 15, 2013
Is there any way to convert a drawing using the Asian Bigfont.shx font back to English? The font can be changed, but the characters remain un-readable. Mostly ? and letters and symbols but no words. It seems like it needs to be translated, and not just converted, but it is not displayed in any form that could be translated.
View 3 Replies
View Related
Oct 23, 2012
Is there anyway to save a multileaderstyle so that I don´t have to create it every time I open a new drawing?
View 3 Replies
View Related
May 27, 2013
I'm trying to import a ploting style from one of the drawing to another from my AutoCAD LT 2012.
View 3 Replies
View Related