Revit :: How To Get Back The Visual Style Which Has Been Disabled

Mar 13, 2013

How to get back the Visual style which has been disabled?

View 2 Replies


AutoCad 3D :: Realistic Visual Style Has Changed And Can't Get It Back

May 15, 2013

i've been plaing with my CUI and found there were a lot more visual styles than i thought so added a few to the dashboard to try out. trouble is, a few have similar names and the same icon and now my realistic that i liked is not available.

now it's kinda semi-transparent.... before it was totally opaque. the same with my 'conceptual'...i can see far too much geometry.

btw i don't have a personal CUI or whatever the procedure is....i just modify the main one when inclined.

i've made a toolabr with ALL the listed visual styles on it and gone through them all but none of them gets it back to the opaque version.

^^^ this is in model space only. viewing from paper space it's the same as it always was.

View 8 Replies View Related

Revit :: Ray Trace Visual Style Renderer?

Aug 28, 2013

which rendering engine use #Revit, #Showcase and #Inventor with ray trace visual style? Don't seem MR and sure not #iray, then...?

View 1 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Changing Text Style Used By Table Style

Jun 29, 2012

I am looking for a way to change the text style used by a table style with Visual LISP.  So far I have been able to get the IAcadTableStyle object from the acad_tablestyle dictionary, but there is no property for text style.  Is this even possible?  Code and results are below.

(defun DumpTableStyles ()
(setq dict (vla-get-dictionaries (vla-get-activedocument(vlax-get-acad-object))))
(setq TableStyles (vla-item dict "acad_tablestyle"))
(vlax-for TableStyle TableStyles
(vlax-dump-object TableStyle)


View 3 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Toggle Between Customized Old Style Menus / New Style Workspaces?

Nov 13, 2011

Is there a way to toggle between customized old style menus and new style workspaces?

View 1 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Opening Drawings With Default Visual Style Set To 2D Wireframe

Oct 7, 2013

Is there a way to programatically set a visual style before a drawing actually opens?

We have some huge models and people seem to forget to change their visual styles back to 2D wireframe before saving and exiting drawings.  Some models will crash on some workstations when trying to open in a rendered mode.

I found a lisp with a function that looked to set viewport visual styles.  But it does not seem to be supported anymore. --> (vla-put-VisualStyle vport 1)

View 9 Replies View Related

Photoshop :: 3D Functionality Is Currently Disabled Due To OpenGL Being Disabled

Nov 6, 2013

I opened a file I had been working on yesterday on a different Mac, and got the error message: "3D functionality is currently disabled due to OpenGL being disabled." I am currently using MacBook Pro (2008), running Mac OS 10.9, using PhotoShop CC. I've already looked at Ps Preferences>Performance and I see this.

View 15 Replies View Related

AutoCAD 2010 :: How To Get The Old Array Style Back

Jun 2, 2011

My company just got all new computers and upgraded out AutoCAD to 2012 from 2009. And every single drafter has complained to me that the new Array is terrible. Basically, it seems to take 10 times as long to set up and array as it used to and now it's linking all of the objects together as a group which is absolutely terrible for what we do especially when we are making 4 or 5 columns or hundreds of objects. I cant find any classic or legacy array commands.

This really needs to be put back in because right now everyone is asking us to put AutoCAD 2009 back on the computers, and the whole reason we bought new PCs is because they couldn't run anything after 2009 without being too slow to be productive.

View 9 Replies View Related

Xara :: Any Way To Get Old Style Drawing Back Like Xtreme 2

Aug 20, 2013

the new Xara Pro X9, but did happen to notice... Is there any way to get the old style drawing back like Xara Xtreme 2? In Xara Pro X9, it seems you have to drag a line to make one, where in the older versions it was click a point move click another point and it draws a line between them, it was much easier to draw lines and bend them on the fly with the older version, or am I missing a step with the new software.

View 3 Replies View Related

Paint.NET :: Going Back To Change Font Style

Nov 6, 2012

as I work on a design how do I go back to change a font size and style

View 1 Replies View Related

AutoCad :: How To Get Default Dimensions Style STANDARD Back Into A Drawing

Nov 26, 2013

How to get the default dimensions style "STANDARD" back into a drawing after it has been purged? I accidentally purged it and now I want it back. .

View 7 Replies View Related

Revit :: How To Get Level Toolbar Back

May 29, 2012

I accidentally deleted the side (left side default) tool bars and how do i get them back?? I cant find the buttons in the main toolbar (top).I got the properties toolbar back but i am still wondering how to get the level toolbar back(that shows you all the different views)

View 1 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Back Up To Speed On Reactors

Dec 3, 2012

I had programmed Reactors in the past... it's been very long time. Need to renew my understanding?

View 2 Replies View Related

Revit :: How To Revert 2014 Back To 2013

Sep 18, 2013

I have a client that wishes to have the Revit 2014 file reverted back to 2013. I was told that I could send the 2014 file to Autodesk and they would be able to revert it back to 2013. Is this true?

View 2 Replies View Related

AutoCad 3D :: Set Visual Style To Realistic

Apr 8, 2012

I have finished the 3d interior completed with lighting and everything. Set Visual Style to Realistic. Is it normal that the drawing would turns to only wireframe during the action of 3d Orbit and 3dwalk? Is there a way to change the setting?

View 4 Replies View Related

AutoCad :: Hidden Visual Style

Oct 25, 2011

I use the hidden visual style when I plot my MEP drawings and I keep having this issues (sometimes it's worse than others) of piping that is on a layer that is off/frozen still blocking a visible line.

It looks like there are wipeout's going over my pipes when in fact it is a pipe not shown.

View 0 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Change This LSP Text Back To ASCII

Dec 10, 2013

I have this old lisp routine that I have been using for quite a while and it works and loads just fine, however I would like to open it to see/edit the code... when I open in Notepad however it opens with wierd symbols... How to get this back into normal text?

View 9 Replies View Related

Revit :: Saving MEP File Back To Earlier Version?

Feb 13, 2012

I have Revit MEP 2012 and created a small guest house in this program. I wanted to add some features using Revit Architecture 2011that are not available in the MEP program. When I tried to bring the files up in the Revit architecture program I get an error message that the drawing was created in a later version of Revit. Is there any way to save the MEP file back to an earlier version of Revit like one could do with Autocad drawings?

View 2 Replies View Related

Revit :: How To Change Current Color Back To Black

Jan 7, 2014

I do not recall making any changes to current settings and I'm not even sure how to do that.All my new detail lines are green.  I have to change them back to black using overides.
Does this signify something?  How do I change the current color back to black?

View 1 Replies View Related

Revit :: Bringing Back Site Plan View?

Oct 26, 2013

bring back my site plan view!, and the ability to use shadow and realistic material!because when  did another site view i am unable to use shadow and realistic view!

View 1 Replies View Related

AutoCAD 2010 :: Turn Off Visual Style?

Jun 19, 2012

Something I did today now causes "2D Frame" to appear near the upper edge of an active Viewport.

I can't draw a line under it, I can't do any command under it.

I hoped that VISUALSTYLESCLOSE would stop it.

It doesn't.

I've unlocked the Viewport.

I've Regenerated.

All the User Interfaces choice are unchecked.

View 3 Replies View Related

AutoCad 3D :: Change Visual Style Default?

Jun 17, 2013

If I make a3d part, turn on the sky-background and illuminationand render the part AutoCAD does something odd. It defaults to perspective view and activates sky-background andillumination every time I save, or switch from a layout tab to model space. How doI get it to default to parallel view and 2d wireframe?

View 9 Replies View Related

AutoCad :: Visual Style - 2D Wireframe Settings

Apr 5, 2011

How does one display obscured lines using different linetypes in the 2D wireframe setting under visual style settings. I need to adjust this setting to view all drawings as 2D wireframes in the viewports in all layouts for more accurate dimensioning (which I do in paperspace)?

View 0 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Scaling DWGs From Imperial To Metric And Back Again?

Oct 24, 2013

I'm looking for a routine that I can choose to scale by 25.4 (Imperial to Metric) or .039370079 (Metric to Imperial).

We just got a CNC Machine that works with metric and people keep asking me to make changes in bothe formats.

I'm using CAD 2014.

View 3 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Get Output From MEASUREGEOM Command Back Into VL Program

Oct 17, 2011

Is it possible to get the output from the MEASUREGEOM command back into an VL program?If I use:(setq angle (command "MEASUREGEOM" "a" line1 line2 "x"),

the value of the angle is displayed on the screen but is not passed back into the program and the variable "angle" is not set.Is there a way that I can set this variable?

View 1 Replies View Related

AutoCAD Architecture :: 3D Visual Style Always Plots Color

Dec 21, 2009

I have created a new 3D visual style so hidden lines are shown but now i cant get the file to plot monochrome.

View 3 Replies View Related

AutoCAD Inventor :: Visual Style - Dynamic Simulation

Aug 19, 2013

I like "Shaded with edges", and I want the edges black. I have set up the display to this setting in Application Options, Display tab (Use application Settings), and Settings button. Excellent, that's nice. (I have also mapped the num pad 6 to that style, along with 5 is Shaded with hidden edges, and 4 is wire frame).

However, In Inventor 2014 Dynamic simulation, the visual style defaults to "Shaded" (no edges). Ok, i can live with that, I guess. I'll just hit NumPad 6 and it looks good again.

Ctrl-Tab to another open file, make a change or two, come back to the DynSim and - hang on, where are my edges? I can just hit 6 again, but should I have to? I haven't ever seen this display property changed when changing between files before.

View 3 Replies View Related

AutoCAD 2010 :: How To Delete Default Visual Style

Feb 29, 2012

I have a problem with autocad visual styles. In my visual styles manager I have the same styles:It causes confusion and when I'm going to delete one of them, delete is not available.

View 1 Replies View Related

AutoCad :: Retain Visual Style When Selecting Object In 3D

Nov 30, 2011

Is there a way to keep the visual style when i select a object.

Example, when i want to align 2 blocks the block i select to move get in to 3d wired ... but the blocks are so complex that i no longer can find the right align points.

so i want to keep then in "conceptional are realistic", don't know if this is possible.

View 9 Replies View Related

AutoCAD Visual LISP / AutoLISP :: How To (transparently) Get Out Of The View Port Back Into Paper Space

May 3, 2013

I'm trying to limit the activity inside a paper space's view port. Specifically text and dimension objects (our routines) as these layers inside the view port may be frozen.

How do I pragmatically get out of the view port back into paper space?
Command: _.PSPACECommand: cvportEnter new value for CVPORT <1>:Command: _.MSPACECommand: cvportEnter new value for CVPORT <2>: 1Cannot set CVPORT to that value.*Invalid*

View 3 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Delete Text Style Not In Use?

Nov 29, 2012

I cannot purge a textstyle out of my drawing. When I run purge nothing is available.

However if I select the style from the style dialog I am able to select delete and delete the style.

When I use the method on the style (vlax-invoke-method style 'Delete). AutoCAD states:

Automation Error. Object is referenced by other object(s)

The style is defenatly not in use but may have been used in the past.

View 8 Replies View Related

Copyrights 2005-15, All rights reserved