AutoCAD .NET :: Parse A Drawing To Bring Back Text From Drawing

May 9, 2013

I'm taking over the development of some Autodesk addins that are used to parse a drawing to bring back text from the drawing, namely title block and bill of materials information.  I have another process that runs and reads the meta data for the drawing itself that gets run from Vault before checking in the drawing.  I need to know if I can combine these two processes such that I can parse the drawing outside of AutoCad.  Is this possible?

View 3 Replies


ADVERTISEMENT

AutoCAD 2010 :: Bring Survey Points Into Drawing

Feb 1, 2012

I am tired of re-creating Description Keys everytime I want to bring in Survey Points into a drawing.  I have tried to drag and drop, but that does not seem to work for me.  I can's copy it.  Is there a way to get Civil 3D 2010 Description Keys  into Civil 3D 2012. 

View 3 Replies View Related

AutoCad 2D :: Text Display In Drawing Versus Text Display From Xref In Same Drawing

Sep 7, 2011

NOTE: This is in AutoCAD 2002.

I'm working on one of our standard layouts for a client. Our typical drawing setup is the base drawing file, surrounded by our Xref'ed border. On said border Xref, we have all the information that does not change between drawings (Revision history, address of job site, etc). The only things that change - and, thus, are not on the xref - are the title of each individual sheet and their number; in the case of these objects, they are located on the drawing file itself in the appropriate position. They are, however, the same font as the text in the Xref - "Standard". Or, at least, they're supposed to be.

The text in the base drawing file seems to be a different version of the text from the Xref - a much blockier, sharper-edged version than the Xref text. My first response was "Okay - I'll just copy/paste the text from the border into my base drawing file, and force the existing text to match the properties of the imported text."

This, however, did not work. The imported text automatically assumed the same form as the existing text. Here's a screenshot from the base drawing, illustrating this (The "Mechanical Plan" also exists on the base drawing, and not the Xref):

I copied the existing text from the base drawing (In this case, the "Mechanical Plan") and pasted it directly into the Xref itself, to see what would happen. Apparently, it wants to stay blocky:

In the latter example, I even tried to force the blocky text to assume the properties of the smooth text via MA (Match properties). I specifically need to make the text in the base drawing conform to the style that the text is assuming in the Xref - which is to say "Smooth."

View 0 Replies View Related

AutoCad :: Put Rotated Drawing Back To Level?

Mar 2, 2012

How do I put a rotated drawing back to level, I would like to do it using 2 pick points on a line I want to be horizontal

View 9 Replies View Related

AutoCad :: How To Bring Back Little Tool Bar Under Cube In 3D Modeling

Nov 18, 2011

How to bring back the little toolbar under the cube in 3D modeling where there is an orbit button and zoom button.

View 1 Replies View Related

AutoCAD Civil 3D :: Mark Spot In Drawing And Come Back?

Jan 9, 2014

Not sure how to word this question correctly.  I saw a co-worker do a 'temp-save' on a drawing, mess around with drawing, and then come back to the spot in drawing where he had 'saved' to essetially deleting all the stuff he had done.  I cannot remeber what he used to mark this and then be able to come back, but if he liked the edits he had made, he could just keep drawing.

View 2 Replies View Related

AutoCAD Civil 3D :: Screen Back Aerial That Is Being X-referenced Into Drawing?

Apr 8, 2012

How can I screen back an aerial that is being x-referenced into a drawing? 

View 5 Replies View Related

AutoCad :: How To Get Default Dimensions Style STANDARD Back Into A Drawing

Nov 26, 2013

How to get the default dimensions style "STANDARD" back into a drawing after it has been purged? I accidentally purged it and now I want it back. .

View 7 Replies View Related

AutoCAD Dynamic Blocks :: Bring Back Old School Block Editor?

May 17, 2013

I played around with the 2010 Block Editor, it must be 5 times more efficient that where it is in 12. Using 2014 like the new Block Editor?

View 2 Replies View Related

3ds Max :: How To Bring The New Icons Back

Sep 4, 2013

I love the new enhanced menu structure with the icons. I've got used to it now and can't look back.
 
However, on my main machine, something has gone wrong. I get the new menu structure, but not the enhanced appearance or icons.

View 1 Replies View Related

AutoCAD Dynamic Blocks :: Send Info From Excel Spreadsheet Back And Forth Between A Drawing

Jan 12, 2012

why I can't export the "Distance 1" attribute out of thsi drawing using the ATTOUT command.  I need to build a series of constrained drawings using Dynamic blocks so I can send info from an Excel spreadsheet back and forth bewteen a drawing.  I think I'll have to buy a 3rd party utility for that but for now, how to simply get the info out of ACAD and into Excel thsat would be a great start.  

View 2 Replies View Related

AutoCAD 2013 :: Convert Drawing Using Asian Bigfont SHX Font Back To English

Aug 15, 2013

Is there any way to convert a drawing using the Asian Bigfont.shx font back to English? The font can be changed, but the characters remain un-readable. Mostly ? and letters and symbols but no words. It seems like it needs to be translated, and not just converted, but it is not displayed in any form that could be translated.

View 3 Replies View Related

VideoStudio :: Bring X4 File Back Into X3?

Mar 30, 2011

Is there any way of importing vsp x4 files back into x3

View 9 Replies View Related

Photoshop :: How Do I Bring The Hair Back?

Jan 22, 2008

I have BW shot of girl with dark hair against a black background. I do levels to get that background nice and black.

I try to paint back the hair in the mask, but it's too difficult. Perhaps I can do it where hair is solid,

View 9 Replies View Related

3ds Max :: Bring Back The Tab Panel In 2013?

Sep 21, 2012

For some UI master, you can tell me how to bring back the tab panel in 3ds max 2013?

View 4 Replies View Related

AutoCad 2D :: Command To Bring Back Option Of Changing Visibility States On Previously Placed Blocks

Sep 6, 2012

I have a drawing with several dynamic blocks (over 1000 block references) with visibility states. I recently noticed that all of the blocks no longer have the option to change the visibility state (i.e. the upside down blue triangle no longer appears when clicking on the block).

If I insert a new block it comes in with the option to change the visibility state. However, the previously placed blocks still do not have the option of changing the visibilty state. Even if I update the definition of all block references in my drawing nothing changes with the previously placed blocks.

Is there an option/command to bring back the option of changing visibility states on my previously placed blocks?

View 2 Replies View Related

Photoshop Elements :: Bring Back To Aperture From 12?

Nov 19, 2013

I didn't have a problem bringing the photo back with Adobe Photoshop Elements 11 back to Aperture.  I am having a problem with Adobe photoshop Elements 12 bring the photo back to Aperture.  In Aperture preferences I am pointed to the Adobe Photoshop elements 12 app in the Support file.

View 1 Replies View Related

Xara :: Any Way To Get Old Style Drawing Back Like Xtreme 2

Aug 20, 2013

the new Xara Pro X9, but did happen to notice... Is there any way to get the old style drawing back like Xara Xtreme 2? In Xara Pro X9, it seems you have to drag a line to make one, where in the older versions it was click a point move click another point and it draws a line between them, it was much easier to draw lines and bend them on the fly with the older version, or am I missing a step with the new software.

View 3 Replies View Related

AutoCAD Civil 3D :: Click In Drawing Area Required After Picking Object To Get Cross Hairs Back

May 23, 2012

When I click on a civil 3d object the contextual ribbon will light up (which is fine) but instead of my cross hairs comming back in the drawing window I get the pointer that would be used to select an item in the ribbon (in the drawing area) and I have to click in the drawing area to get my cross hairs back or to grip edit the object or to delete the object.

Is there a option/setting I need to change to be able to get me cross hairs back after selecting a civil 3d object?

Just move to Civil 3d 2012, this worked just fine in '11...

View 4 Replies View Related

Photoshop :: How To Bring Back Mini Bridge To CS6 Page

Aug 29, 2012

While initially looking at mini bridge after installing CS6,I closed it. how to open it again. I've looked at all the tools on the top panel. It's nowhere to be found. Timeline is (and what is that???) but not mini bridge. And while we are at it, what IS timeline.

View 7 Replies View Related

Photoshop :: Bring Back All Of Open Images Onto Screen Again?

Sep 2, 2012

As you will see from my attached image all of my open images are now sitting outside of the screen. To get them to appear on the screen again I have to hold down the PS logo at the bottom of my screen, which then brings them up as per the image, then click to select an image. This then brings it onto the main screen. But I have to do this with each image individually. How to bring them all up at once? Or how to turn off this feature completely?

View 1 Replies View Related

Photoshop :: Bring Back Line Screen And Angle Settings

Jan 5, 2012

I just made the jump from CS2 to CS5 where I found Photoshop no longer offers settings for line screen and screen angles for spot color printing. This is a critical feature for me and most others in my industry. Photoshop is the go to program for color separations for garment manufacturers and this is a crippling omission for us. Are there any plans to patch CS5 or to bring this critical feature back in future versions? I have been told by customer & tech support that my only option, while already owning CS2 & CS5, is that I will have to buy CS4 from a third party and go backward. While this may work temporarily, it imposes additional cost, and does not address the long term issue of the removal of these controls. Garment manufacturing is a relatively small, but constant industry among your customer base and Photoshop & Illustrator are our right and left hands.

View 3 Replies View Related

Lightroom :: Clicking On Other Tabs Doesn't Bring Basic Back?

Feb 10, 2014

I was using Lightroom yesterday and lost Basic.  Clicking on the other tabs doesn't bring it back.

View 1 Replies View Related

Photoshop :: Layers And Layer Comps Disappear In Palette But Can Bring Them Back

May 1, 2012

A lot of times I'll be working on multiple .psd files and as I'm moving between files I'll notice that all the layers & layer comps will disappear from their palette

[URL]
 
I can bring them back by doing something like clicking on the text tool and then clicking on a text item on the stage. It's annoying because it takes a couple of clicks for the palette(s) to redisplay.
 
Is this a bug or is there a setting in preferences that can control this?

View 1 Replies View Related

AutoCAD 2013 :: Drawing Order - Send To Back / Not Working Anymore In 2013

Apr 17, 2013

I have this heavy issue, i can't send to back a line, an object or a hatch under other lines. In 2012 i used this feature a lot but in 2013 it's not working very much, maybe 1 time out of 10 and i absolutely can't say why.

HPDRAWORDER = 1 seems to work with a new hatch.. but i can't redraw everything.

Let's say i put an entire floor plan into block then draw over it. (I don't want to start a Xref discussion please) i can't send the entire bloc to the back.I used to do that with 2012, 2008, 2007.. but it's 2013 it's not working, is there a way to correct that?

View 9 Replies View Related

AutoCad 2D :: How To Bring Object To Back Or Front Of Another Object

Jun 17, 2011

We upgraded to AutoCAD Mechanical 2012 (from AutoCAD Mechanical 2009).

I used to go: TOOLS > DRAWING ORDER, in order to bring an object to the back or the front of another object.

Now that we are using AM 2012, I can't find where this command is located.

View 2 Replies View Related

AutoCAD 2010 :: No Longer Copy / Past One Item From One Drawing To Separate Drawing

Dec 10, 2013

Eventually after I copy and paste with the clipboard enough times within one drawing, the ability goes away and I can no longer copy and past one item from one drawing to a separate drawing.  I need to use the clipboard function because that is the only way of getting an item from one drawing to another.  

I have download a clear clipboard function but it doesn't work. Closing CAD and restarting does not reinstate the function.  

View 5 Replies View Related

AutoCAD Inventor :: Showing Parameters Of Drawing Template On Actual Drawing

Jul 26, 2013

I have created an iLogic panel which allows me to control my revision a lot easier and puts my entered data into the parameters of the sheet itself, is there a way to have this show up on the drawing itself for a template?

View 1 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Saveas Drawing With Default Drawing Name

Oct 13, 2013

I am trying to put together a lisp routine for exporting a Civil3D drawing to basic autocad entities and convert it to a clients layer standards.

I don't want any user input, so I see two problems with the routine at the moment.

Step 2. SAVEAS - I want the drawing to be saved in the same directory as the current drawing, either called "CLIENT_export.dwg" or preferably "Export_{current drawing name}.dwg". If the dwg exists I want it either to overwrite or increment a suffix number.

Step 4. At the moment it askes the user for a selection, I want it to select "ALL"

;;;Purpose to convert a Civil3D drawing into CLIENT layer standards.

(defun c:client ()
(setq old-echo (getvar "CMDECHO"))
(setvar "cmdecho" 1)

[Code]...

I don't have any experience with LISP or any other programming. I have just been cobbling this together from bits and pieces I have found on the web.

View 3 Replies View Related

AutoCAD 2010 :: Double Click Opens Drawing Plus Blank Drawing

Sep 11, 2012

My Autocad has started a new behavior.  When (in Win7) I double-click on a drawing file in Windows Explorer, Autocad opens the drawing file and also starts a new drawing, all in the same session of Autocad.  Is there some system variable or Windows variable that controls this?

View 1 Replies View Related

AutoCAD LT :: Exiting Drawing By Clicking On Small X In Upper Right Corner Of Drawing

Oct 31, 2011

When exiting a drawing by clicking on the small X in the upper right corner of the drawing, my program routinely "stops working".  I get the error message that it has stopped working and it closes.  No chance to save work in other drawings open at the time.  I often have three or four drawings open so my only workaround is to go through each and save, then close the one I want to close, let the system crash and reopen the other drawings.  It does not crash every time but several times a day.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved