AutoCAD Dynamic Blocks :: Bring Back Old School Block Editor?

May 17, 2013

I played around with the 2010 Block Editor, it must be 5 times more efficient that where it is in 12. Using 2014 like the new Block Editor?

View 2 Replies


ADVERTISEMENT

AutoCAD Dynamic Blocks :: Actions And Parameter Grips Obscure Drawing-block In Block Editor

Mar 28, 2011

My drawing- block is a little bit complicated, it contains few actions and parameters and everytime i open block editor to add, or to modify some action I can't see my drawing because actions grips and parameters grips obscure my drawing. I tried to refresh layout but it doesn't work.

please take a look on attached jpg.

View 1 Replies View Related

AutoCAD Dynamic Blocks :: Block Editor Won't Close

Oct 7, 2009

I will double click into a dynamic block to edit it in Block Editor. None of the blocks dynamic attributes will show up. Then I try to exit the block using either "bclose" or by clicking "Close Block Editor" and get this message: "bclose command only allowed in block editor". Um... hello Autocad, I'm in the block editor.

My only option at this point is to close the file... CAD politely asks me if I want to save my changes, and unfortunately I made the mistake of saying yes the first time this happened. If I choose to save the changes, when I re-open the CAD file it will only be the block that I was editing! It purges everything else in the file (and it is apparent that it only saved the block b/c my file size is much smaller than the original). The backup file is also only the blocks information, b/c CAD believes it is saving correctly. My other choice is to not save, and lose all of my changes since the last save or since the last autosave.

View 8 Replies View Related

AutoCAD Dynamic Blocks :: Edit Text Without Using Block Editor

Oct 23, 2013

I just learn about dynamic block. How to edit text inside dynamic block without using block editor. I want directly edit text inside.

View 1 Replies View Related

AutoCAD Dynamic Blocks :: 2010 - Actions Associated With Parameters Disappear From Block Editor

Jan 29, 2010

Is it just me or do the actions associated with parameters disappear on occasion from the block editor? Sometimes a regen will make them reappear, other times not. Closing/opening the block editor is one way to make them visible again (worked a few times at least).

View 6 Replies View Related

AutoCAD Dynamic Blocks :: Visibility States Perfect In Block Editor But Corrupt In Model Space

Jun 28, 2007

I have been working with attributes and visibility states for months, i've created a dozen blocks that have worked exactly as designed... Now every block i make with the same method is not working properly

attached is a really simple block. to the left are the 4 individual attributes in the block. on the right is the dynamic block with 4 visibility settings to show 1 attribute, 2 attributes, etc... everything is perfect in the block editor, in model space; vis state 1 shows 3 att's, vis state 2 shows 3 att's, and vis states 3&4 work as designed.

I'm under the gun to create standard blocks to collaborate with 2 other another firms.

View 9 Replies View Related

AutoCad 2D :: Command To Bring Back Option Of Changing Visibility States On Previously Placed Blocks

Sep 6, 2012

I have a drawing with several dynamic blocks (over 1000 block references) with visibility states. I recently noticed that all of the blocks no longer have the option to change the visibility state (i.e. the upside down blue triangle no longer appears when clicking on the block).

If I insert a new block it comes in with the option to change the visibility state. However, the previously placed blocks still do not have the option of changing the visibilty state. Even if I update the definition of all block references in my drawing nothing changes with the previously placed blocks.

Is there an option/command to bring back the option of changing visibility states on my previously placed blocks?

View 2 Replies View Related

AutoCAD Dynamic Blocks :: Link Dynamic Block Custom Rotation Action

Mar 22, 2013

So I've done a reasonable amount of work with dynamic blocks. I have a block with a rotation action and grip to arbitrarily align it.  However I realized when trying to combine it with an alignment grip (which actions on the basic or fundamental block rotation angle) that there didn't seem to be a way to some how link a dynamic block rotation action or one of the custom angle properties to a the fundamental block rotation angle.  Thus there are two additive rotations at work; the dynamic block one with its grip and the fundamental rotation property.

This can cause some confusion when one person aligns with the grip and another via rotating the block's fundamental property and would also be problematic in the generalized sense if one was trying to select or programmatically read back the net angle alignment.

View 2 Replies View Related

AutoCAD Dynamic Blocks :: Moving Properties Table Grip In Dynamic Block

Jun 13, 2013

I have a dynamic block, that represents a stirrup.

I inserted in the block a Block Propreties Table, that have some preset dimensions for the stirrups. The grip of this table I decided to put in the top right corner.

The problem is that I can't make this grip moveable )

See the attachement with the block

View 1 Replies View Related

AutoCAD Dynamic Blocks :: Flipping Dynamic Block With Multiple Items Not Visible

Jul 25, 2012

new to dynamic blocks but looking to streamline my wiring diagrams here and have created a block that shows the typical wire styles we use in a simple easy way.  I now want to add an overall flip to the entire block and have not been able to find set this.  I would prefer to use the same label and go from there.  I have included the block to show what I mean.  It is only working on the single visible item at the one time.  I know this has to be possible just let me know what I am doing wrong.  I am running AutoCad LT 2013 

View 3 Replies View Related

AutoCAD Dynamic Blocks :: Create A Dynamic Block For Glass Panel In Balustrade

Feb 28, 2012

I need to create a dynamic block for a "Glass Panel" in a balustrade. I need to be able to insert it, in one corner and stretch it in another corner, to suit the staircase angle.

I've created the block, but it isn't working correctly. I've attached a drawing, with the left hand drawing a sketch of how it needs to be. The right  hand drawing is my dynamic block attempt. As can be seen, when the block is stretched between the 2 points, it doesn't follow the angle of the staircase correctly (Very slight run off)

View 9 Replies View Related

AutoCAD Dynamic Blocks :: Insertion Point Of Attribute Changing Within Dynamic Block

Nov 21, 2011

I wish to create a dynamic block containing some attributes. These attributes are inside rectangles that can't be modified in length using linear parameters ; but the attribute has to be always in the middle of the rectangle. So, I draw a line inside the rectangle (in a hidden layer) and insert the attribute with center justification (not sure for the translation) that I place in the middle of this line ; then I put a coincidence constraint (not sure for the translation, but it's the first one) linking the middle of the line with the middle of the attribute.

But here's the problem : when stretching my rectangle, the insertion point of the attribute suddenly changes from "center" to "bottom left".

View 2 Replies View Related

AutoCAD Dynamic Blocks :: Pass Attribute Values To Dynamic Block Parameters?

Dec 4, 2013

I am looking for a way to use the ATTIN/ATTOUT workflow to bring in data from an excel spreadsheet to drive the size of each of my block's instances. The block will be simple, a rectangle, with width and length parameters. For each entity in my excel/csv file these parameter values are spelled out. I know how to display these parameters in my attributes, but I don't know how, if I were to feed in these values, to drive the geometry. If there's a better way to take a list of width and length values to generate a series of blocks each with a rectangle containing its respective size.

View 1 Replies View Related

AutoCAD Dynamic Blocks :: How To Disable The Dialog Box Shown When Open A Dynamic Block

Nov 7, 2011

I need to do some repetitive task on a lot of dynamic blocks, unfortunately, when I open each file, AutoCAD keeps asking if I want to open it with the block editor.

Is there a way to disable that dialog and open the files as normal dwgs?

A hint: BLOCKEDITLOCK doesn't make it, it shows another dialog...

View 4 Replies View Related

AutoCAD Dynamic Blocks :: Make Dynamic Block Of Column Radiator

Mar 26, 2012

I'm trying to make a dynamic block of a column radiator.

It should be very simple. It's a 46mm wide module that comes in a range of heights (300, 500, 600, & 750mm) and a range of assembly widths (9, 13, 18, 22 & 27 modules wide - more commonly given as mm widths of 414, 598, 828, 1012 & 1242 respectively).

My attempt at constructing it has gone quite well, but when 'stretching' the block a ghost of the core 414 (w) x 300 (h) unit remains. I attach the block to give you a better idea of what I mean.

View 4 Replies View Related

AutoCad :: Insert Dynamic Block From File With Multiple Dynamic Blocks

Jul 16, 2010

I have a drawing ("SURUBURI.dwg") with several dynamic blocks ("M12", "M16", "M18" ... an so on...). I want to insert in my current drawing, one of the blocks from SURUBURI.dwg, for instance the block named "M12".

For that i tried creating a new command "INSERT_M12" that has the following script :

^C^C-INSERT; "I:/Ionut Mihaila/Goodies/SURUBURI.dwg/M12"

Now obvious that doesn't work, but i think it shows clearly what i want to accomplish. So is there an other way to do this?

View 9 Replies View Related

AutoCAD Dynamic Blocks :: Join Two Dynamic Block To One Common Action?

Sep 18, 2013

I'm working on a drawing and I want an action to work on two diffrent dynamic blocks. 

In my case, I wish to have two blocks that I can rotate by one rotation grip.

How do I manage to work this out?

View 1 Replies View Related

AutoCAD Dynamic Blocks :: Stretch Dynamic Block Grip Points

Feb 4, 2011

I have successfully created a dynamic block. I can insert it into AutoCAD, and it behaves like I want, except for one thing.

I can select the block and change it by taking a grippoint and place it at another position. So my block is e.q. stretched, just like I wanted.

But then. When I want to use the ordinary STRETCH command of AutoCAD, I can only stretch the insertion point of the block, but not the grippoints. Is there a way to set a grippoint to be select edable by commands like STRETCH.

View 9 Replies View Related

AutoCAD Dynamic Blocks :: How To Create WAVE Dynamic Block

Mar 1, 2013

I would like to create a "wave" dynamic block, see below...

It is made from wipeout.

Is it chance to make a similar?

If I make a list for the length (from 125 to 350), after can I make a table /list /summary where these size are shown?

View 9 Replies View Related

AutoCAD Dynamic Blocks :: Scaling Objects In Dynamic Block

Jun 27, 2013

Why the drawing title in my dynamic block will not scale up or down. The rest of the objects scale properly but just this the drawing title text attribute will not follow suit.

I tried adding position point and link, etc....I run out options and don't know how to fix this.

LT 2012 user

AutoCAD LT 2012
Windows 7 - 64 bit

View 3 Replies View Related

AutoCAD Dynamic Blocks :: Grip Point Dynamic Block

Nov 15, 2012

I have a dynamic block with several actions and parameters. There are three grip points. Two are visible. One appears when you move one of the other grips. If i insert or paste this block near my template, the X/Y basepoint stays near the template when i drag the block on the template with one of the other two grips.. When i print the drawing the basepoint stays visible and the scale on my printed drawing is not correct (smaller).

View 9 Replies View Related

AutoCAD Dynamic Blocks :: How To Keep An Object Centered On A Dynamic Block

May 29, 2013

I am creating a dynamic block of a conveyor belt it has a set number of widths and needs to be stretchable in length, which I have managed to do. The motor is placed half way down the length of the conveyor and needs to stay centered

I know I need to use the move command and put in a factor of 0.5 somewhere, but I can't remember how to do it.

View 6 Replies View Related

AutoCAD Dynamic Blocks :: Create Dynamic Block With Dimension

Jan 4, 2014

I have a drawing with dimensions. Now, I want create Dynamic Block Controlling Visibility with dimensions in drawing with name dimension.

LT-don-TD LT-Kdoc-TD LT-Kngang-TDLT-don-thay LT-Kdoc-thay LT-Kngang-thayLT-don-moi LT-Kdoc-moi LT-Kngang-moiH-don-TD H-Kdoc-TD H-Kngang-TDH-don-thay H-Kdoc-thay H-Kngang-thayH-don-moi H-Kdoc-moi H-Kngang-moi

Then, I use command DAL; I can select dimension want use.

View 8 Replies View Related

AutoCAD Dynamic Blocks :: Stretch A Hatch In Dynamic Block?

Jul 4, 2013

How do I stretch a hatch in dynamic block? It does not seem to work if I select the hatch along with other lines of a counter block.

View 2 Replies View Related

AutoCAD Dynamic Blocks :: Keep Item Centered In Dynamic Block?

Mar 5, 2012

I have an X centered as my insertion point.

When I stretch the dynamic block for a larger area the X stretches but into the next single box but not centered within the double space.

how to get the X to be centered in the box when it is enlarged to a double or triple size?

View 3 Replies View Related

AutoCAD Dynamic Blocks :: Mirrored Rotation Dynamic Block

Jun 14, 2012

Is it possible to mirror a rotation within a dynamic block?

See the attached drawing.  I am trying to have two rotations within a dynamic block, but only one grip.  When the grip is rotated one half of the block rotates while the other half rotates in reverse.  The resulting action would be much like the wings of a butterfly.

I have tried many different combinations of parameters, actions and constraints with no luck.  The block in the attached file was as close as I could get. Have I reached the end of what AutoCAD is capable of?

View 7 Replies View Related

AutoCAD Dynamic Blocks :: Dynamic Block Linear Array?

May 5, 2012

I have a block of a roof screen. What i want to do is to stretch it & have the slats on the front & also the supports on the rear array @ different intervals. The slats on the front would array every 6-1/2" (The slats are 5-1/2" wide with a 1" gap). The supports array every 4'-0". I have tried to do this multiple ways with mixed results. How to get my desired outcome. I am enclosing my block.

View 5 Replies View Related

AutoCAD Dynamic Blocks :: Selecting A Edited Dynamic Block?

Mar 28, 2011

I have the attached file as a dynamic block.

Last week I opened the drawing and added some visibilty states etc. to the block.

Now when I open the block or insert it into another drawing for whatever reason the cursor or crosshairs stop at the edge of the block. And if you move towards the middle of the block where there isn't any lines etc. the cursor will move to that point until you hit another line then it will stop moving again.

I've been reading some other posts for different dynamic block topics/issues and read that everyone has problems when you get to higher numbers of visibility states, but when I edited last week I only added 7 states. Is that enough to make this happen? It sounds like everyone else that is having problems has far fewer visibility states than on the attached drawing. 

View 1 Replies View Related

AutoCAD Dynamic Blocks :: Moving Dynamic Block With Attributes

Dec 19, 2011

I made a dynamic block with attributes. The block was to be moved using Linear parameter + move action, and then a lookup parameter and action.

The block moves as it is suppose to but the attributes are left behind. How can I get the attributes to move with the dynamic block?

The attribute properties are:

Verify = Yes.

Lock position: Yes or No don't seem to make a difference.

Is this a bug in AutoCAD or is there a solution to this?

View 3 Replies View Related

AutoCAD Dynamic Blocks :: How To Create A Dynamic Block That Changes In Scale

Jul 27, 2011

I am looking to create a dynamic block that changes in scale, ex. If I have two (2) viewports in paper space, one 1/4"=1'-0" the other 1/8"=1'-0" I want my blocks to appear to be the same size in paper space.

Also, I would like my blocks to change attributes/features ex. If I have a "light switch block" I would like to have the option of switching the block from a 3-way switch, 4-way switch etc.

View 4 Replies View Related

AutoCAD Dynamic Blocks :: How To Get Blocks To Have Images Associated With Actual Block Name

Apr 29, 2013

I am using AutoCAD 2013 on Windows 7 platform

95% of the blocks on the palettes have the images associated, and named, per the block name.

I have 48 blocks that the images are named like this "Block tool_F2149212-4649-41F5-95E6-4A978EC376F5_2".

I have tried resaving the blocks and recreating the blocks to no avail.

How to get these few blocks to have images that are associated with the actual block name and not the generic "block_too" name?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved