Is there any way to control which is the dominant object when aligning? Or, to establish to which object the others align? Like in CorelDraw. It seems quite arbitrary: some times all the objects move but on occasion only one moves. I can' see any system to apply.
View 3 Replies
what does it depends that how many control points are on an object in Designer Pro as default?
For example in Shape Tool creating a horizontal line (click and somewhere beside CTRL - click), at me it creates control points at the end of the lines plus two ones on the line.
That is super anyway because immediately can be seen where is the 33% of the line length, but could be set somehow this that how many control point should be as default?
1. find the attached “Rays on Oval.png” file. (Tried attaching .cdr file but the File Size is 400KB.)
2. I would like to Repeat / Duplicate that Black Color on Outer Path of Oval Shape. (Like shown in the Yellow versus Black. The Yellow is a Circle and the Black is from Star Tool)
3. I think the Best Bet would be to Link the Rays to the Outer Path of Oval Shape.
4. I need the Rays and Oval as 2 Different Objects so that I could Change the Color Scheme.
Is it possible to align object by 2/3 point using .net? Its easy to do with autocad, but I can't find a way to do it using .NET.
View 6 Replies View RelatedHaving trouble making a perfect alignment, 90 degrees, 180 degrees etc. When object is duplicated and rotated it appears to be out of alignment with original. Is there a finer control for snapping to grid/object without having to use increments or perhaps adjusting them?
View 3 Replies View RelatedIs there a way to align text or an object on a page? I have done this using the guides, but there has to be an easier way! I'm looking for vertical and horizontal alignment.
View 1 Replies View RelatedI wish to align a text like this at an oval shape. The field of the text body does align at all - which I can understand. Using the grafic text, it aligns directly on/ over the outline of the oval shape. But I won't have the whole text in a round - I just want to have the paragraph's left side to be aligned/ positioned at the outer shape of the oval.
View 4 Replies View Relatedis there a way of aligning an object along a path? For example an elipse or an arc.
View 2 Replies View RelatedI would like to layer them in such a way that the orage circle below is put in front of the green circle. Essentially, I need to select only the part of the orange circle and bring it to the front while leaving the other part of the circle alone. Can this be done in Illustrator?
In summary, this is what I am trying to accomplish: Green over blueBlue over yellowYellow over orangeOrange over Green
Also, is there a way to use a tool inside of illustrator to arrange the locations so they are all 100% perfectly alligned and meeting in the middle without "eyeballing" it?
How do I control the color of a shadow with the Shadow tool?
View 5 Replies View RelatedI am working on an animated gif, and so with bitmaps, to which I am adding text in Xara.All of the text that I create seems to want to be gray. I have tried changing transparency, I have tried setting my default color, and changing the color of the text.I have also checked to make sure that the text is not set to transparent. If I select the text, and then the transparency tool, it shows "No transparency", and the transparency is set at 0 percent. It is interesting that, if I move the percent transparency above 0 percent and then back down to 0 percent, it changes to "None" in stead of "No transparency". Is "None" the same is "No transparency"?
View 4 Replies View RelatedWhere is the option to control page width & height so that you can make both even measurements? I typically get something like w 1920.4px & h 1080px. When I try to change the width to 1920 the height adjusts as well. I know there is a simple fix for this but I can't find it.
View 3 Replies View RelatedI cannot find that feathering control bar.
When I go to windows, control bars, and check it, nothing comes into view. So I assume it's out of my view...how do I get it back?!
I created 2 new control bars. Each is 2 icons wide (double column). When I drag these new bars to anchor then on the left edge they snap to a single column and I can't get them to stay 2 columns wide.
View 9 Replies View RelatedI've included a URL to a screen grab that shows how the artwork falls off the desired background. And so effects what gets printed ... I think.
What is the normal way to cause the printed product to cut off at the desired edge?
In this case the blue noisy bkg is the exact size of what is supposed to get printed.
"AVI animation frame rate control You can now set the AVI frame rate of exported animations, and the animation preview window now has thumb track control on a timeline."
View 3 Replies View RelatedHow do I control which colors appear in the color line that scroll across the bottom of the window. The only colors that currently appear are shades of reds/purples and yellows/greens. If I scroll across from left to right the same colors just keep repeating themselves. There are no shades of gray or blue. Can I somehow preset the colors that appear or do I have no control over what colors scroll across the bottom.
View 4 Replies View RelatedIs there a way to control the name of a Smart Object when edited? It currently opens as 'rectangle#.psb' though it is now a complex multi-layered object.I would like to give it a meaningful name.
View 26 Replies View RelatedIn the model space there is the "ZoomCube" and there was a "Zoom" object there as well. Somehow I turned it off. I can't find a way to turn it back on. Can't seem to find the documentation for the same.
View 1 Replies View RelatedPlease see the attachment. My goal is create a DBText object just like the the left one, but this one is copied from another drawing, My own DBtext is the right one which was created by C# code.
Everyone should be able to find subtle differences, yes, The AlignmentPoint property of the left DBText is placed in the middle, and the base point is placed in the lower left corner In contrast, the basis points and the AlignmentPoint of the right DBText are coincident.
How to control AlignmentPoint Property of a DBText Object? I just want to creat a Dbtext just like the left one.
I have tried to directly modify AlignmentPoint property, use the the follow
objText.AlignmentPoint = new Point3d(0.83333333333, 1.25, 0);
But AutoCAD will be throw a Exception that message is eNotApplicable, and the AlignmentPoint won't change as my want.
I use net to select an object,and highlight it. but the control point couldn't be shown!
View 3 Replies View Relatedimagine you have a HumanIK character and a vehicle like motorbike or similar, and you want the character to drive the vehicle. Ok then: Parent the reference node (your_character_name:Reference) into your vehicle root. Ok, works fine but now you need to constrain or parent the control of the hands to the handlebar.With maya constrains not work fine and don’t know why.
i need to create a Auxiliary Node in the Character Controls?I’m trying with Parent Constrain, Orient, Aim.. and don’t work properly: Position (tx,ty,tz) work’s fine but X-axis of rotations are inverted… when turn the handlebar to left, rotation turn to right.i trying with offsets or any parameter in the constrain but nothing..
how to use a vertex of an animated morphed mesh to control position in some other object ?
as an example:
to be able to follow with (target of) the camera the nose of a morphed animated head.
How to set up a dynamic block so I can control the size of an object through parametric dimensions that are linked (somehow) to a lookup table, spreadsheet, list, etc.?
What I'm trying to do (simplified) is place a block of a rectangle, select a size from a dropdown list, and have the block change to be that size - but I don't want to do this through visibility states as there are hundreds of sizes. The whole point is to be able to construct a list, lookup table, excel sheet, etc and link it to parametric dimensions in the block, or at least be able to link a stretch action to parametric dimensions. But the block editor will not allow me to associate a stretch action with a parametric dimension (at least I haven't figured out how to do this.)
how to add an object to a group?
As I remember somewhere read that there is some way of it without ungrouping, however now reading the Designer Pro help it seems that is needed
To add more objects to a group
Select the group.
Ungroup ("Ctrl + U")
Select the extra objects.
Group again ("Ctrl + G")
Basically this group is a repeating object on several pages so maybe would not touch that with ungrouping, but of course if there will be no other choice
Setup: Designer pro 6.1
How to add noise?
I looked up `noise' in help file and it mentions distortion filters but for some unimaginable reason... does not mention where they are.
Ok, looked up `distortion'... It tells about distortion filters but again... Showing an almost insane way to organize.... again it is not mentioned where they are.
how to add noise to an object? The help file has failed its most basic role... and has left it to my imagination as to where these filters may be.
Import a photo image which is, for example, 100px high by 500px long. Now apply a simple fade transparency from the left edge to 100% transparent 100px in from the left edge (i.e. 400px of the image's length is now 'invisible').
Export this as a png and then import this png. It will still be 100 x 500 - can you tell Xara export the image truncated down just the 'visible' portion (i.e. 100 x 100)?
How to make a Contour object transparent? In below example is set a 1 step contour on the star, setting transparency the yellow is transparent but the grey not.
Contour_Transp.xar
I am aware that the star could be turned to editable shape, after clone and subtract so the transparency could be controlled on both shapes, but is there maybe some other way?
Also could be a way of course to set outline for the star and not contour, but I do not like as in that case the line half inside and half outside of the shape.
Just a question about adding objects to an arc instead of a whole circle for example using a hearts brush. I draw a circle, convert it to a shape and then bisect it with a line that has also been converted to a shape then I slice and break shapes and now I have a perfect arc but when I go to my brushes and try to add my hearts brush to the arc it like doubles the hearts. Is there anyway to overcome this so that I only have a single row of hearts on the arc. By the way I'm using XaraXtreme Pro 5. T
View 6 Replies View Relatedi want to export only a part of an object, not the whole image or object; in photoshop & fireworks for this issue i have the slice tool; so i can exactly export what i want.
is there also a similar option in xara designer; if not how do you it?
My "Magic Snap"[magnetic object snapping] has vanished/stopped working. Turning the magnet icon on and off does not do anything .I am using the latest Xara Designer Pro version [7.1.1.17261]. Is there any way to get it back without re-installing? I'm tired of having to re-install every time something goes wrong [which is kinda frequent]. I don't like having to reset the xara function icons each time [I use a different arrangement than the garden variety supplied].
I am using an i5 processor and have 8 gigs of memory running with Windows 7 OS.
