How do you add a keyline stroke around an imported tiff, jpeg etc? In InDesign it's as simple as adding stroke to the frame (the frame is automatically created upon import).
OK, I think I figured this out and it is soooo Illustrator:
Add stroke to object (nothing visible happens); apply a 'convert to rectangle' effect to the invisible stroke and... voila, a simple keyline!
I imported a music graphic to AI, selected it, then chose warp and changed some settings in Lower Arc, but nothing happened. How to do it?
View 20 Replies View RelatedI've got a car that's been imported from Alias. Its been tessellated via showcase. I'm trying to UV map it as I need to apply some camouflage and it's not going so well. I get an extremely complex UV layout in the UV editor based on the original NURBS patch layout from Alias, needless to say its not very useable.
View 2 Replies View RelatedI've tried to import a dwg file that was created by someone else but I'm having a hard time editing it. I can scale it and move it and things like that, but if i wish to change the height. I tried scaling it, but it messes up the object. The object I am trying to shorten is a measuring rack on this site [URL].......
I can't change the objects height. Perhaps it's because it's a block reference or something. I've tried editing the block itself, but i have no luck in trying to edit the height. I cant splice it either.
I've attached the file im trying to change the height of.
I am trying to use it to do something for school. I imported a 3d object from a dwg file and there is a channel that curves along it cut into that. I want to move a cylinder in this channel. I cannot seem to find anything that will allow me to make a spline that mirrors the edge of the object or to constrain the cylinder to the object.
View 1 Replies View RelatedI imported a character model that I downloaded off of the internet into maya, and I have run into a snag as I'm rigging, skin binding, etc. The model has a main body, but its armor is actually separate geometry. My problem is that the shoulder pads and leg armor are mirrored, so that when one moves, the other one does as well, which is a big problem when I want to animate the model. Is there a simple way to split the pieces up so that they are not mirroring each other? My guess is that they were originally created that way so that each side didn't have to be individually worked on.
View 1 Replies View RelatedI try to shoot all my pics same light, etc. I want to paste all my designs on this uniform towel (no background).As you can see the square pasted on with basketball is on the same cloth but looks unmatched.
how I could blend/edit it in with the towel, keeping basketball & Kyle the same? Or should I try doing something else?
I have a 3ds model of a golf ball I purchased. It imports properly into my Photoshop CC. I haven't been able to figure out how to apply an image (my logo) to the surface of the golf ball. Also, the golf ball has a dimpled surface so I will want the image to follow the contours of the ball, as if it would look if the logo were painted onto a real golf ball.
EDIT: Also, I want to keep the golf ball as a 3d object so I can animate it in a scene.
I have a revit file with an imported dwg object. I accidentally deleted all of its layers. How can I purge the object out of the revit file?
View 5 Replies View RelatedI recieved several .stp files from a vendor and most of them imported without incident. One part is giving me a major headache though. The envelope of the solid body is much larger than the actual part. This is causing the origin to be skewed by several orders of magnitude. Any way to trim down the envelope to the part size?
Using IV2011 Pro.
I like to attach a .aim or import a inventor DWG into a section and a plan in autocad.
But how do I select the right orientation on import? The default Inventor view is a sideview and won't work on a plan.
Right now it seems like I either have to go into 3D model view and rotate the object or have to change the orientation Inventor for plan and then reorientate it for section...
Previously i`m using version 2009 and importing Google earth image and surface works fine. However, recently i tried with version 2010 and i`m having some problem here (imported surface / contour seems ok but the image is too large like 3x or 4x). How to solve that?
View 3 Replies View RelatedIs there a way to ungroup the elements of an imported pdf in Illustrator 6? Do you have to change the settings in Adobe Acrobat first to allow the elements to import individually rather than a group?
View 3 Replies View RelatedI have the following pdf what was created with Wolfram Mathematica 8: [URL] ....
When I import it in Adobe Illustrator (CS5.5 on mac), embed it, and tren try to move it, I get the following error message:
"Can't move the objects. The requested transformation would make some objects too large".
I have a dwg that someone imported and I cannot find where this object is. I have tried searching the database with DBLink, Ideate BIMLink and I have gone into every view to no avail. I also used the reviTTools add-in which says there are no drawings in the file. Am I dealing with a corrupted file? I am super OCD and this is in our Template which makes it an even bigger problem.
View 2 Replies View RelatedThe above image is the layers panel in Illustrator of a placed PSD file that was imported with the layers maintained.
What do the dotted underlines for the two layers mean? Do they just mean they are layers or something else?
There were layer masks on those layers in Photoshop, but they were applied to the image so there is a transparency around the image.
I understand what has happened to the image, I just don't understand what the dotted lines are supposed to signify.
Is it possible to use an imported text as a number? I would like to import a .txt tab formatted file containing some values (ex: 22.5; 50.00; 150.00, etc.), and I want to treat those values as numbers in my script. Is this possible?
View 2 Replies View RelatedI took a snapshot of a picture off my pdf file and opened it up in illustrator and now it has the circle with the slash through it, how can i edit it and draw on top of the imported image?
View 3 Replies View RelatedI converted all my FreeHand files. Some have transparencies. Illustrator shows the transparencies, but does not recognize them in the Transparency panel. It says they have 100% opacity even though they appear transparent. I assume this is just how they got converted. Is there any fast way to make them recognize their original opacity % as set in FreeHand?
View 5 Replies View RelatedI have simple a 3D bottle shape created from about 16 points and I am trying to map a gif image on to it usning CS5. No matter what I have done (work from a new document, etc.) I always get the error message. I also receive this error when I attempt to map a jpg image on to the same shape. I have attempted this on three different Windows 7 machines running CS5 with the same result. When I try it with CS6 the program closes with a catastrophic error and no message. I do not receive this error using the default symbols. The gif and jpg images are imported and imbedded into the document and then moved to the symbols library.
View 6 Replies View RelatedI am having some trouble with a file in Illustrator CS6. Within a layer, when I add a fill to an object, the fill doesn't block out the object paths beneath. For instance, say I have a square object overlapping a circle object in Layer 1. The square object is above the circle in the layer. When I add a fill to the square, the circle stroke still shows through the square even though the overlapped part should be blocked out by the fill. The square is set to normal visibility, and I have made sure that there are no duplicate paths that would account for what I am seeing. (I.e., it's not a case where there's a second identical circle path that is on top of the square, so that it remains visible in spite of the fill.)
Other details:
- I'm mainly working with a white fill, but the problem is the same with fills of any color
- When there's a fill color in the circle path as well, the circle's fill color *is* blocked out—just not its stroke.
- I have restarted Illustrator and restarted my computer and these have not changed anything.
- There are other layers within the same document where the normal layering rules work.
- I tried copy/pasting some of the problem objects into a new document, and in the new document, the fill works properly.
- If I move the problem objects to another layer, then the fill works as it should. But as I'm dealing with a number of paths, it doesn't make sense to create a layer for each to solve the problem.
I can't tell if it's a matter of working in too large or complex a file.
I'm working with 27 artboard in illustrator for one project. I would like to select the object I need to get to in my layers panel and have illustrator "jump/navigate" me to the object where it resides on the artboard. Is this possible?
View 3 Replies View RelatedHow do I drag to select over the top of objects without selecting and moving the objects under the mouse when I begin the "drag to select" motion?
View 2 Replies View RelatedI've created an object containing several shapes in Illustrator CS6 and exported it as a DWG, In Autocad 2014 I've exploded the block using XPlode command, now I want to extrude this shapes so I can create a geometry and start doing booleans and so one.
When I click in the Extrude option and select any of this shapes I get an error saying that objects of this type can not be extruded. I'm completely stuck I've been going back and forth from illustrator to Autocad 2014 and I can't find what's wrong.
P.S. The shapes in Illustrator have no stroke or filling so you will have to "Select All" to see the whole thing. The DWG and AI files are inside the attached zip. The DWG has been exported using "File > Export" w/ "Maximum edit-ability" from Illustrator.
I produced a colour map and colour gradient legend as a postscript file (.ps) using generic mapping tools software running under linux. When I import this file into illustrator (in windows 8) the colour map is fine, but the colour gradient does not display properly. It appears as a bunch of white spaces and vertical colour bands of random colour. When I then try to export the file as a .pdf the colour gradient appears as solid blue. I've also tried producing a .pdf instead of .ps but it makes no difference.
It's worth noting that I have done this in the past with no problems. This particular problem first occurred a few months ago and is now persistent.
Why do curved lines from a dwg file get deformed when imported into illustrator? how can I stop that form happening?
View 3 Replies View RelatedI have imported this jpeg into illustrator. How do I edit the color of the image, as in the color of the letters?
View 1 Replies View RelatedIn vbs, I import a illustrator file with this way
Set importedGroup = appRef.ActiveDocument.GroupItems.CreateFromFile(dest)
after i duplicate them
Set dupItem = importedGroup.Duplicate(newGroup, aiPlaceAfter)
but i don't know how to "ungroup" or "unmask" the importedGroup?
I have looking to use clipped but it seems to not working.
I have been watching MANY videos, but just cannot seem to figure out how to color the B&W photo I imported into Illustrator CC. Do I need to do something in Photoshop first? I was able to trace the image but from there I am lost.
View 4 Replies View RelatedI have a rectangle over a larger imported image, and I would like to get rid of the area that the ractangle covers. Clipping mask does the opposite, getting rid of the area outside, and pathfinder only works for paths, not imported images.
View 2 Replies View RelatedI made a simple poster using photoshop to make the background and illustrator to make the fonts and some other stuff. In CMYK my black is just 100% K ( in photoshop)
When placing image in illustrator the 100% K (black) changes to different black with C M Y added. But then when I save it as PDF the preview shows black as a bit grey (which is something normal- in print it will be just black). So my question is .. should I change enything just to be able to see a 100% K in illustrator in order to match CMYK values of Photoshop? Or should I leave it this way? I guess if I am getting a "grey" in PDF preview is something good isn'it? because in photoshop when I set to 100%K in my screeen it looks like grey and not total black.
