I have been trying for an hour to clip a few frames off the beginning of a video & save. I want to keep everythis as-is. Just trim & save. Everything I try requires recompiling & I loose a generation of quality. When I use "Save Trimmed Video" I get an error that says "Unable to get samples.(osErr=-9461)".
I just want to trim & save.
I was looking for a simple piece of software to do basic but frame-precise clip editing like trimming and I learned about Corel VS. (Well, I was looking for a tool to work with less common formats like flv, f4v but...)
Anyway, I stumbled upon this message that reads like: "the current operation can't be completed because the current clip's duration is less than 3 seconds". I tried both in easy and advanced edit but I simply can't trim a clip.
I loaded the frames (like in image) in my editor and I want to know how I compress the time? In my editor I have 12 minutes for all the frames and I want to compress at 8 seconds. The time is not active when I select all frames.
View 3 Replies View Related[URL]
What I'm doing is trying to CUT some XVID video and save them with their original format via the following steps:
Share > Create Video File > Same as First Video Clip. The progress will go through to 90%, then I will get the error message:
Unable to compress the audio [17103:10:5]
Decompress the original won't be a choice when hundreds tasks are out there.
The detail infomation about the video I'm working on, hope it will provide more details.
xxx.avi
General
Complete name : xxx.avi
Format : AVI
[Code]....
I have some video in mpg format I'm trying to split into scenes, and then save off a separate videos. When I try to save one of the trimmed scenes using "Save trimmed video," I get the error: "Unable to compress video with the specific frame rate or frame size." It's all set in 16:9, and it's all set to 29fps, etc.
View 4 Replies View RelatedBecause i still don't have audio when loading a video in the timeline and go to projectmode. The audio is also not in the output file. It is when playing original clip in library and when in timeline choose the clip but not in project mode and output file.
Thats why i split audio and video in Virtualdub to wav (direct stream copy) and then load audio and video in VS4. Now i want to multi-trim the clip. But only the video is trimming the audio is not trimming with it so audio is off sync.How can one multi trim a video with the audio who is seperatly loaded in the audio track?
Version in use - X5 Pro Ultimate.This is about trim handles that seem to re-locate - from a clip to a whole project - for no obvious reason, and once it occurs the only fix is a program restart.
I have noted when working on projects that periodically the clip trim handles - those orange icons that sit at the end of the white clip strip timeline that appears in the view panel when clip mode is selected - will re-locate from the clip view to the project view. That is, they no appear in clip mode, but reappear when project mode is selected; and they then operate on the whole project. That's a trap - the first time it happened and I was trimming a clip, it trimmed the whole project. Ruined it completely, start again was the order of the day. Now, I keep an eye on that: when it happens there isn't an obvious way to get the handles back to the clip view, and the only option then is to NOT do any further changes, save the vsp and close VS down. Re-opening VS and re-loading the vsp breaks whatever condition caused the relocation of the trim handles, and gets back to condition where the trim handles being displayed in the clip view, and trimming of a clip can be done without damaging the whole project.
I recently upgraded my Corel VideoStudio X2 to Corel VideoStudio x4 Pro. After removing the old program and installing the updated version,I then restarted my computer and attempted to use it to edit a video. I placed the youtube video that I'd converted to AVI format into the timeline on the program. I then proceeded to attempt to trim <cut> the video at the first place that needed to be fixed and also at the end of the area to be repaired. After fixing it,I then reset the video to the beginning and watched for the expected changes. Much to my surprise,there was audio all way to the first cut spot on the video and absolutely nothing for the entire rest of the video;even in the cut or changed area. I was naturally puzzled as I never had this issue with the previous version. I then checked all my system audio controls and those of the program to make sure that nothing had changed or been accidently muted;including all audio settings were at proper levels,and everything was on and working as should be. I then checked the device manager to see if I found any yellow "?" marks on it for some strange reason to insure that all drivers were installed correctly;and found nothing amiss there. I then went to youtube and played a video and then a music CD in my computer to insure that my audio system was still functioning correctly and,as expected,they both worked fine and gave me audio output. Puzzled,I closed out the VideoStudio and all programs and re-started my computer. I then re-opened VideoStudio and tried again. I placed the same video on the timeline and played it without any changes. It played perfectly fine and I had audio thru-out the entire video. I then re-tried to adjust the video by clipping it and once again...no sound for the rest of the video. I re-checked all drivers and audio connections without finding anything amiss. I even tried other videos that I'd converted to AVI format in the program timeline,that I still had on computer with the same exact results after picking a spot and clipping them as before.....no audio. I even tried clipping the video in different spots;both by clicking on the scissors and with the editing options located in the program interface with the exact same results...no audio after the cut. I searched thru the program interface. I enjoyed the previous version immensly so was looking forward to using the updated version;but can't unless I can get this problem reesolved. Worse case,I can go back to the old version that worked fine for me but I hope not to.
View 2 Replies View RelatedI've just started using VS X6 Pro, after not doing much with video for a few years. I previously used VS 10 and 9.
We have a canon P&S camera which produces HD H264 mov files which I am editing for the first time and getting a weird problem. The files play fine on the time line, but when I try to use the multi-trim tool I get two issues:
1. Audio is badly out of sync in the multi trim window, like 1/2 second in a 20sec clip. (again, same clip plays fine on the time line)
2. When I make a multiple trim, the "play trimmed video" button does not work properly. eg if I make two selections from a clip with a gap between them, play trimmed video plays the whole clip to the end, then returns to the start of the second trim selection and plays that.
If I load up an mpeg2 .avi clip, the multi-trim tool works perfectly: audio is in sync and it correctly plays only the trimmed sections.
I have enabled smart proxy on the clips, and following another hint in a thread here, I downgraded quicktime to 7.5.5 but neither worked. Also I have installed sp1.
1.I am using the latest version of videostudio which I upgraded today today June 11, 2011.
2.I am using a Sanyo Video Camcorder PD2, which I am recording in 1280 x 720 29.97 frames per second.
3.I’ve imported the video, into the program, and I am simply trying to “join” the video by using step three that is “Share.”
4.I am clicking option “create video file” and then the option “same as first video clip” because I would like to preserve the same video settings. There are other ways I could join the clips, but these ways do not preserve the video settings. So when I choose “same as first video clip I get my error message “The frame size of the video (1280 x 720) does not match the settings and therefore cannot be trimmed.’
I am trying to overlay a few videos side by side where I crop each video to a third of its size only showing what I cropped per video. I used the crop fx but the borders are solid black and the videos behind them do not bleed through. Is there a way to crop the videos ( mask them ) so that only a portion shows and the other overlays show through? ( like three slices ).
I could just overlay one over the other but the subject is not always on the left or right side of the video and may be centered so I'd have to trim the sides.
I shoot vacation video with out tripod and at the beginning of each clip, I have shaky video because of pressing the record button.Same apply to end of the clip when I stop the recording.
How can I trim beginning and end of the clip for first one second length?
I have Video Studio X5 and the video format is AVCHD (Canon HF S200).
I use VSX3 to edit down .mov files created with a contour HD helmet camera. I have been using a 720p version of the helmet camera and have had no issues with editing (other than the ocasional C++ runtime errors and the VSX3 program crashing randomly which just seems to be a Corel programming issue) Recently I got to use a 1080p contour HD helmet camera and have problems editing the files in VSX3. In the preview window in the edit screen the 1080p file plays fine. But when I try to trim the file down using the "multi-trim video" function the file is very jittery, takes a long time to load and the sound is in and out, almost like the program can't handle a 1080p file for editing. The "mult-trim video" works fine for the 720p videos.
View 1 Replies View RelatedMany of my videos seem to be trimming and saving to a file. With a HD video at a high data rate, all I do is trim the video and save back to a file. However, I select the "Same as first video clip" to save to a new file. What I usually do is save the file and use a third party software to reduce the video the data rate I need.
In other to reduce the re-rendering time, I wish both processes could be done in VS's 'Options' button.
One of my soap box rants is about Owners Manuals and user guides. Most are a direct translation from the Japanese or Mandarin.
The VS User Manual also is fairly useless as it glosses over the useful detail. (previous query about files used by VS) In this case the Multi Trim tool has two unexplained buttons, the Ad-Zapper and the Merge CF.
I suppose the Ad-Zapper relates to our overwhelming desire to eliminate commercial breaks. (Have you noticed how much longer they have become in recent months? At least one brew and a slice of toast before the program restarts) But what is Merge CF? And how does Ad-Zapper know what is program and what is an Ad?
I made the stop motion effect by the multi trim,and every time after 35-50 sec the software crash,i have to save my work every time before the vs4 crash,what should i do?
View 2 Replies View RelatedWhen I move the slider VS PRO X 4 gets an unexpected error and closes.Digging around I found the Ultimate version and tried the trial download. It worked for a while and then the application terminated again.
I reloaded X4 Pro and installed SP 1 & 2
I find confusing that the X4 Pro Build number without either SP 1 & 2 is:14.0.0.342
The Build after Sp1 is: 14.1.0.107
The Build after Sp2 is: 14.2.0.23
Then this ULTIMATE version has a build of 14.1.0.150? Looks like the same family and from the same department.
The GUI is also the same no mention of Ultimate - and the Sp's think it is another pgm?
What does the Ultimate do that the Pro X4 does NOT?
With CVSproX4 i can't to do a low sliding titles (news). i want that one rotates from right to left of the video. The available effects of the software doesn't forecast this simple effect.Or not?
View 3 Replies View RelatedAs I did all my recording, I noticed a distracting element in the bottom right corner of the image and I would like to crop it out. I calculated that I could use the crop filter at 90% and it gets rid of that annoyance. However, this leaves some black space around, which I don't need. Maybe I need something more like a zoom-in so I can only see 90% of the original image, but taking up the whole space available (without that frame around). I would assume that exists but I cannot find it, or if there is a different process, I have not figured it out.
View 9 Replies View RelatedIllustrator keeps freezing when applying an effect such as texture-grain to a simple gradient, or even rasterizing a simple black circle. My system is about a 6month old macbook pro with 16gb ram, i7 and AMD Radeon HD 6770M 1024 MB. What could be causing this? It wasn't like this when i first started using the laptop but has started to do it everytime i try and do any of those simple tasks recently.
View 5 Replies View RelatedI just want to keep a part of my image (in that case the bird). Then I cut that part, erase the part of the picture I don't need, and I stick the part with the bird. To finish, I resize the frame so it is adjusted to the part I want to keep (the bird). (Hem... I suppose there is a more easy way to do all that, but I don't know it.
Here is the question : how can I save that part of my original picture WITHOUT compressing it again? I don't want to lose any quality of the previewsly picture ; since I just want to save a part, is this possible?
Many times I want to upload photos of myself to websites as profile photos or for other professional reasons. I have some examples but they're too large. Most of these sites ask for photos no larger than 120x100 or 240x260. When I resize my photos smaller, they appear very blurry and pixel.
What's a way around that so I can meet the compression requirements of these sites without compromising the integrity of the photo?
I'm a mechanical engineer with a lot of experience working with SolidWorks, but no experience with AutoCAD. My boss has asked me to take a 44MB .DWG and compress it to under 15MB so that it can be viewed on his iPad to show to clients (using the AutoCAD WS which is limited to opening files smaller than 15MB). I spent hours doing this several weeks ago and was just barely able to get it down to the required size. However, I was never able to repeat the process and to be honest, I'm not entirely sure how I did it. Now I have to do it again for a different file and am struggling to do so.
Since the file is just going to be quickly shown to clients it does not need to have all 400 layers or any other kind of accompanying details. Hell I could merge all the layers together if that would reduce the file size and I knew how to do that. I'm not at my work computer right now, but I think by clicking options under save and removing all proxy images (or something like that) I was able to reduce the file size to around17MB. I've purged the file as well but that only removed a few KB.
I have a website, but the loading is quite slow. So I am trying to compress the photos to reduce the loading time. Which method would you recommend to compress my photos so that they still look good but at the same time light in size?
View 1 Replies View Relatedis there an easy way to compress a pic so it can be e-mailed?
is there a program or option within photoshop that would let me select like 20 pictures and compress them and resize them? i dont want to go through and manually compressing 1000 of my digital camera pics.
View 9 Replies View RelatedI have a ton of TGAs that could use RLE. I was looking for a batch conversion option in the GIMP file menu that I could use to convert uncompressed TGA's to compressed TGA's, but I couldn't find one. How would I batch compress TGA's then?
View 2 Replies View RelatedI set up a text box, for say the word "Tractor". Let's say that with the font I select, the width of the text box is 2 inches. I want to be able to replace the text, with say the phrase "Green Tractor" and I want the text to automatically compress in width to be no longer than the original 2 inches and I want the text height to be the same as the first.
I know I can select the text box handle and re-size manually but I am entering many fields for each print job and I need it to do this automatically. Also if I entered the word "toy", I would not want the word to stretch to fill the 2 inches but retain standard proportions.
My Engrave Lab program does this on our engraver and I am basically trying to do the same function in Corel for our sublimation printing operation.
Does adobe make anything that I can use that will batch compress files for the web and create thumbnails?
View 2 Replies View RelatedI have tried a lot to compress my start image at my web page but than I can't get the quality.
what is the best method to compress an png- image (I need png because some parts of the image are transparent)
I have a 39KB AI file I need to compress into a 20MB PFD while retaining all image quality for print.
View 4 Replies View Related