I have a website, but the loading is quite slow. So I am trying to compress the photos to reduce the loading time. Which method would you recommend to compress my photos so that they still look good but at the same time light in size?
View 1 RepliesI have a number of circuit boards to put on our website and I decrease in size and the photos never look that great. I use the save for web setting in PS, but was wondering if there was perhaps I should customize when I get there to increase clarity. That is what it looks like when I decrease in size.
View 16 Replies View RelatedI've got several photo files I've taken for a friend, edited them to display a transparent background, to use on his website. They're saved right now as layered psd's.
They're pretty large files (40-70 MB). My challenge is that the webmaster asked for them to be sized "at least 1800 pixels @ 72 dpi longest side." I'm a bit confused at the 1800 pixels @ 72 dpi.
I'm planning to save them as .png and .tif (this is what was requested).
I'm using PS CS5 and my OS is Win 7.
I just want to keep a part of my image (in that case the bird). Then I cut that part, erase the part of the picture I don't need, and I stick the part with the bird. To finish, I resize the frame so it is adjusted to the part I want to keep (the bird). (Hem... I suppose there is a more easy way to do all that, but I don't know it.
Here is the question : how can I save that part of my original picture WITHOUT compressing it again? I don't want to lose any quality of the previewsly picture ; since I just want to save a part, is this possible?
is there an easy way to compress a pic so it can be e-mailed?
is there a program or option within photoshop that would let me select like 20 pictures and compress them and resize them? i dont want to go through and manually compressing 1000 of my digital camera pics.
View 9 Replies View RelatedDoes adobe make anything that I can use that will batch compress files for the web and create thumbnails?
View 2 Replies View RelatedI loaded the frames (like in image) in my editor and I want to know how I compress the time? In my editor I have 12 minutes for all the frames and I want to compress at 8 seconds. The time is not active when I select all frames.
View 3 Replies View RelatedMany times I want to upload photos of myself to websites as profile photos or for other professional reasons. I have some examples but they're too large. Most of these sites ask for photos no larger than 120x100 or 240x260. When I resize my photos smaller, they appear very blurry and pixel.
What's a way around that so I can meet the compression requirements of these sites without compromising the integrity of the photo?
I'm a mechanical engineer with a lot of experience working with SolidWorks, but no experience with AutoCAD. My boss has asked me to take a 44MB .DWG and compress it to under 15MB so that it can be viewed on his iPad to show to clients (using the AutoCAD WS which is limited to opening files smaller than 15MB). I spent hours doing this several weeks ago and was just barely able to get it down to the required size. However, I was never able to repeat the process and to be honest, I'm not entirely sure how I did it. Now I have to do it again for a different file and am struggling to do so.
Since the file is just going to be quickly shown to clients it does not need to have all 400 layers or any other kind of accompanying details. Hell I could merge all the layers together if that would reduce the file size and I knew how to do that. I'm not at my work computer right now, but I think by clicking options under save and removing all proxy images (or something like that) I was able to reduce the file size to around17MB. I've purged the file as well but that only removed a few KB.
I have been trying for an hour to clip a few frames off the beginning of a video & save. I want to keep everythis as-is. Just trim & save. Everything I try requires recompiling & I loose a generation of quality. When I use "Save Trimmed Video" I get an error that says "Unable to get samples.(osErr=-9461)".
I just want to trim & save.
[URL]
What I'm doing is trying to CUT some XVID video and save them with their original format via the following steps:
Share > Create Video File > Same as First Video Clip. The progress will go through to 90%, then I will get the error message:
Unable to compress the audio [17103:10:5]
Decompress the original won't be a choice when hundreds tasks are out there.
The detail infomation about the video I'm working on, hope it will provide more details.
xxx.avi
General
Complete name : xxx.avi
Format : AVI
[Code]....
I have a ton of TGAs that could use RLE. I was looking for a batch conversion option in the GIMP file menu that I could use to convert uncompressed TGA's to compressed TGA's, but I couldn't find one. How would I batch compress TGA's then?
View 2 Replies View RelatedI set up a text box, for say the word "Tractor". Let's say that with the font I select, the width of the text box is 2 inches. I want to be able to replace the text, with say the phrase "Green Tractor" and I want the text to automatically compress in width to be no longer than the original 2 inches and I want the text height to be the same as the first.
I know I can select the text box handle and re-size manually but I am entering many fields for each print job and I need it to do this automatically. Also if I entered the word "toy", I would not want the word to stretch to fill the 2 inches but retain standard proportions.
My Engrave Lab program does this on our engraver and I am basically trying to do the same function in Corel for our sublimation printing operation.
I have tried a lot to compress my start image at my web page but than I can't get the quality.
what is the best method to compress an png- image (I need png because some parts of the image are transparent)
I have a 39KB AI file I need to compress into a 20MB PFD while retaining all image quality for print.
View 4 Replies View RelatedHow do I compress a (39KB) file into a 20MB PFD (while retaining all image quality)?
View 4 Replies View RelatedA while back I figured out how to put a few characters before and after several lines of code in iLogic to make it compress to one line or expand to its full size inside the code editor. I belive this is a fairly common VBA command, but I can't figure out how to do it again.
Inventor 2014
HP Pavilion dv6t-6b00
Intel Core i7 2670QM
AMD Radeon HD 6490M
8gb RAM
Windows 7 64 bit
3Dconnexion SpaceExplorer
I have some video in mpg format I'm trying to split into scenes, and then save off a separate videos. When I try to save one of the trimmed scenes using "Save trimmed video," I get the error: "Unable to compress video with the specific frame rate or frame size." It's all set in 16:9, and it's all set to 29fps, etc.
View 4 Replies View RelatedI decided to use Data Link Tables for my Excel sheet instead of OLELinks. The appearance is far sharper, and I am also pleased there is no background color transfered. What IS the problem is when I update the table, its goes from 12" Wide by 12" Tall table @ 7/16" Text W/O borders back to 3" Wide by 10" Tall with varying text size to fit and gains back all borders except diagonals (of which none are present on the Excel file).
So, any way to default the format when I refresh so that it holds each cell at the 6"X1" dimensions with no border.
With that, If there is a way to have a stencil for making the range links with Excel, that would be useful. I use the exact same 4 or 6 ranges (2 formats) in every dwg.
How do i program my corel photo paint to compress large jpeg photo file to a smaller size and save into another folder.
View 5 Replies View RelatedIs it possible to compress a line or object drawn on top of another line or object to create one object?
I import my AutoCAD 2011 drawings into a CNC however the software isn't happy if a line is drawn on top of another line. If this happens it is not obvious simply by looking at the drawing and I have to go through the drawing checking each and every line which can be quite time consuming.
I have web design premium CS3, and I just started experimenting with making my websites in Photoshop. In the meantime, I have been experimenting with Flash and love it. My question is, if i build a webpage in photoshop, how do I add my flash file to it? I tried the photoshop help section of photoshop itself and there are tons of different types of files it says I can work with, but I still havent found a way to add a flash file to my PSD web document.
View 8 Replies View RelatedWell I re-did my web site and finally got it mostly finished and published. I am trying to get an overall opinion on it so far.. I would appreciate any C & C's ; comments, critiques. There are a few small things (2 typos) that I know I need to fix..
View 9 Replies View RelatedI have a series of images in a folder on my PC. I'd like to use CS5 to automatically generate a web page to display these images. This used to be easy with older versions of PS. In fact PS provided several format options for the resulting web page. I can't find this capability in CS5? What happened?
View 1 Replies View RelatedI am looking to slice a website up in Photoshop, I have created my design in photoshop for 800 x 600. I think this size is wrong as i haven't allowed for the scroll bar in the browser...
I notice i can use the slice tool, or slice from layers etc.
What about place holders i have left for "pure" text which of course i will enter in my html editor? But i should imagine i want it to export with the text place holder in the html file otherwise the html with the graphics are not going to line up?
Also i have created a box with rounded corners, i presume i should only be exporting the four corners and using some trickery to lower file size..
I have designed a page in photoshop and I have been researching on how to get that image to be a website with hyperlinks, anyway I have learned that I need to import my image into ImageReady but I can't seem to find that option in Photoshop CS3 - my question is where would i find Image Ready or is this a Pluggin I need to get?
Also, will creating my site via photoshop slow the site down? Will the site not load completely depending on the browser used?
Right i have created my template etc.
And what i want the site to do is where the content box is for text instead of having to use photoshop to edit what text is in here i want to be able to edit it through notepad or frontpage.
Even when i view the site you can not highlight the text as it appears as an image.
I have a logo on a website that I'm doing that looks like crap on the blue background I have. I have to keep the logo (as it is on every truck in the company), but I'm hoping I can clean it up a little. Does anyone have any recommendations?
View 1 Replies View RelatedI spliced all the images, and then ..saved for web, now the question is how do I make it in to an actual website? Everything right now is just images, but how can I make the site actually editable through html, etc.
I also would like input on the site if you could. The main thing I don't like are the text on the buttons, I've downloaded a whole bunch of different fonts, but I can't find one that looks perfect.
How do i make a nice looking website with photoshop?
how to make a nice 3d looking website.