I want to change the shortcuts for osnap on/off (default F3) and ortho on/off (default F8 ) to either F1 and F2, or some letter like q and w, or ctrl+w and ctrl+e.
I cant find them under cui-->all commands. Don´t know if they are there somewhere.
Is it possible to change them to either of the above shortcuts?
I prefer F1 and F2 if it´s possible, then q and w and last if neither of the other two is possible ctrl+w and ctrl+e.
Have existing hotel site plan project folder and I copied it to new location and renamed folder and file names I have a grading plan that has spot elevations from data shortcut referenced surface. Is there a way to reference the new revised surface, that has same name and have the elevations update with the new surface and then delete the original referenced surface.
Civil3D 2013 Windows 7, 64 bit Intel i7 2600 @ 3.40Ghz 16 GB RAM Nvidia Quadro 600
I need to update both the path and the Source file name in Data Shortcuts editor. If I update the path, it looks in the new path for the old file name, and throws an error. If I update the File name, it looks in the old path for the new file name, and throws the same error.
I can't change the keyboard shortcuts in max. If i change them and restart max, the changes a revert.The problem is, that max stores some config files into &#xPr;ogramFiles%, but a normal user (without admin rights) can't write to files there.
e.g.: DefaultUI.clrx and DefaultUI.kbdx are stored into: C:Program FilesAutodesk3ds Max 2013en-USUI
3dsmax.exe gets a "ACCESS DENIED" from the OS but this error would be silently ignored IMHO the error should be raised, so that the user knows about unsaved settings...
For this i have created:URL....
Everyone can reproduce this behaviour with process monitor from sysinternals. You will see this:
When looking at the keyboard shortcuts for MAC, the 100% zoom is down as command alt '0', yet it is showing in the dropdown list as 'n'?
Is there a way of changing the shortcuts. Previously the 100% zoom was simply command (apple) '0', which is now fit to page. how to change the shortcuts?
When Googling I found some pages saying that it should be possible to change the order of the layers in Track View with shortcuts, but they don't say how. Can't find anything about this in the customize dialog.
I am trying to change/add some shortcuts in the customization dialogue but are unable to remove/find/overwrite the conflicts. checking the navigate to conflicts makes no difference, see the attached images. I don't understand how "conflicts with multiple shortcuts." can be correct? How can there be several identical shortcuts in the main table? This is a new installation and everything is updated.
How to change the keyboard shortcuts for applying Color Labels to photos? I have Keyboard Tamer, and I was able to remove the shortcuts for applying star ratings, but there seems to be no way to change the commands in Photo > Set Color Label.
See, many times a day I will click the white balance color temperature fileld and start typing "5500" only to then realize that the click on the entry field didn't activate it and I have now inadvertently changed the ratings and/or label colors for several photos. Super frustrating to then have to undo a bunch of times, especially when I'm viewing based on rating and/or color label, because photos can spontaneously vanish from view.
In selecting a point in a drawing to connect new poly lines to existing objects, is there a way to set the order to which osnap elements are used?I have perhaps 1/2 of the osnap element settings activated. End point, Mid point, Node, Intersection, etc.
When I go to select, it's like everything EXCEPT End Point is recognizing. And while I can go to right click, and select end point, I am now wondering, if besides the rt click, there is a way to preset the priority, or order in which the osnap elements recognize the type.Without resetting the settings each time.
My "Nearest" osnap is not even close to snapping to my circle. All other snaps are working fine, nearest snap are working on lines and rectangles, not at all on circles.
I quite often like to use the wall grips to adjust the length of a wall. This works really well accept for the occasional situation were I want to snap to the face of another wall rather than the justification line. I know that I can snap to the face of a wall rather than the justification line because I have some files that it works fine in and other files that it does not work in.
How to turn on the perpendicular osnap. Whenever i open the draft settings window and get close to the perpendicular name it changes to midpoint. I can not seem to select the perpendicular name.
For example, the hatch below consist of lines but the “Osnap” can’t see them! Then when trying to draw a line for the point indicated below to the end of the one of the hatch lines then the snap doesn’t indicate the “Endpoint”
I had been using the Osnap Toolbar forever, during a drawing session the toolbar vanished. I've gone to View Toolbars and the Osnap Toolbar is not listed. How do I recreate the Osnap Toolbar or find where it is hiding?
Is there a setting that I am missing where if your osnap is set to node, it will snap to the node if you hover over the point text? I seem to remember this working in versions before 2012.
When trying to draw or stretch a line or grip along an object in 2013 it does not follow the osnap like it does in 2012. For instance if I draw a line and then want to draw another line from the beginning of that line along that line using the nearest osnap and inputting a distance, the line follows the cursor rather than the snap.
Civil 3D 2013 SP1 Win 7 x64 SP1 Intel Core2 Duo 2.67 GHz 8 GB RAM NVIDIA Quadro FX 3500
All of my OSNAP settings are reverting back to some default every time I open AutoCAD. This includes the snaps that are auto (I set endpoint, intersection and perpendicular. When I reopen, I get a random medly of snaps like tanget, parallell, insertion ect.) Object Snap tracking also truns off.
The settings in my profile also turn off (eg. marker). I have tried saving the settings to my profile with no luck. All of my other profile setting remain untouched.
We model the building using AEC steel members in AutoCAD ACA. When the piping group xrefs our model into their model (in regular AutoCAD) to add their pipe, the AEC steel behaves properly in model space, but when they go to dimension in paperspace (for example from the center of their pipe to the face of a column) osnap does not recognize the AEC steel geometry.
I thought there was a setting for this? I want to adjust the Osnaps so they appear further away from the point. IE: As I want to pick the quadrant I have to get so close to the quadrant before the osnap shows. I can't remember the variable to adjust this distance.
I have an xreffed drawing and I can snap on wall edges in model space but not through paper space. I have tried the "allow snap on wall justifcation line" and nothing has worked.
I'm running 2002 and I have a drawing with an array of lines (forms a grid ceiling, actually). With OSNAP on I cannot grab the intersection of these lines, however, it does work on other lines in the drawing, as it usually does.
