AutoCad :: Shift-Right Click OSnap Menu

Jan 16, 2013

Any list of the shortcut keys for the Shift-Right Click Osnap Menu?

I know:
E = end
M = midpoint
P = perpendicular

View 4 Replies


ADVERTISEMENT

AutoCAD 2010 :: Make Osnap Menu Appear With Shift+right Click?

Aug 26, 2010

New hardware and fresh upgrade to v2011.

All computers will show the osnap menu when we shift+right click but one computer shows the regular short-cut menu.

How do i make the osnap menu appear with a shift+right click?

View 5 Replies View Related

AutoCAD 2010 :: Shift -> Right Click Not Pop Up OSNAP Menu In 2011

May 23, 2012

My Application Migrate from AutoCad 2008  to 2011.Shift right click osnap menu is not pop up.

View 3 Replies View Related

AutoCAD Civil 3D :: Make Shift+Ctl+right Click Bring Up The Shortcut Menu?

May 20, 2013

I use the right click as repeat last command a lot, but occasionally I need the shortcut menu and I have to go back and change my settings for right click.

What I would like to do is make Shift+Ctl+right click bring up the shortcut menu, but I cant seem to find it in the command list and when I do searches on google it just brings up stuff about adding an item to the shortcut menu.

Is there a way to make Shift+Ctl+right click bring up the shortcut menu?

View 9 Replies View Related

AutoCAD 2010 :: Shortcut Menus Mouse Buttons (CRTL+Right Click And SHIFT+Right Click)

Feb 15, 2013

I have two menus that I use often and I would like to add them to my mouse buttons. Attached is a picture of the two menus I like and the two buttons. The Shift + Click has the correct menu already (Osnap menu2) my problem is adding my custom menu to the CTRL + Click doesn't work. I labeled Osnap Menu 1 and 2, 1 being the custom menu I have use in the past and 2 being the default osnap menu that comes with the cui file. How to get the second button to read my menu rather than both read the same osnap 2 menu?

View 1 Replies View Related

AutoCAD Architecture :: Add-in More Menu At Right Click Shortcut Menu?

Jun 26, 2013

I intended to add more option at right click shortcut menu. Is it possible to be done?

View 2 Replies View Related

AutoCAD 2013 :: Deselecting By Shift+Click Stopped Working?

Oct 29, 2013

A while ago I found out you can deselect something from your current selection set by holding down the shift key and clicking on it. This was a pretty useful tool...but then it randomly stopped working today for me.

View 4 Replies View Related

AutoCAD Civil 3D :: 2013 - Shift Drag / Click To Deselect Kaput?

Jun 11, 2012

Am I missing something or has shift-drag / click for deselecting been removed from C3D 2013?

Is this a variable I can re-enable?  Or is there a hotfix for this?

View 2 Replies View Related

Photoshop :: Shift+Click Brush Line Not Working!

Nov 21, 2007

I'm shift clicking the lines but they just won't connect!

Using version 8.

View 9 Replies View Related

Photoshop :: Can't Select Multiple Layers (Shift-Left Click)

Jul 31, 2004

I know this problem is really simple, but I just can't seem to get it to work. I should be able to left-click on a layer, hold in the shift key while left-clicking on a layer further down the list to select multiple layers. It doesn't work, I can't even get the (Alt-Left Click) command to work, allowing me to select individual layers.

Both these commands work in Image Ready and Flash just fine.

I have checked the keyboard settings, but I am not really sure what to look for - nothing seems out of the ordinary.

View 3 Replies View Related

AutoCAD Architecture :: Inactive Snap Shortcut Menu (shift + Right Mouse Button)?

Nov 6, 2012

I have an inactive snap shortcut menu. When clicking shift + right mouse button the menu appears but when I typet

"E" for "ENDpoint",  "M" for "Midpoint" or when I just click over the respective icons in the menu nothing really happens and I get the following message in the command bar:

"Command: _endp Unknown command "ENDP".  Press F1 for help."

or 

"Command: _mid Unknown command "MID".  Press F1 for help."

I tried following, none of which worked:

1. resetting the main customization file ACA_Global.cuix

2. switching between different profiles and cuix files

3. reinstalling Autocad Architecture 2013

4. uninstalling and Installing Autocad Architecture 2013 service pack 1

5. installing older versions of Autocad (2008 and Architecture 2012)

6. reinstalling Windows 7 and installing Autocad Architecture 2013 again

View 1 Replies View Related

CorelDRAW Graphics Suite 12 :: Change Hot Key To Copy Object While Dragging From Right Click To Shift Key?

Aug 14, 2011

is this possible.  A lot of programs auto-duplicate when you drag and press either the shift or ctrl or alt key. Its a habit ive gotten pretty into. Plus, its a little akward for me to go from a left click immeadeitaly into a right click with the mouse. I always feel like i've dragged the object a little bit when I switch fingers.  it would be great to just add a hot key of shift+drag to this feature, wouldnt even have to turn off the standard right click option, I could deal with both being there.

View 1 Replies View Related

Photoshop Elements :: Tilt Shift In Guided Edit Does Not Change When Click On Icon

Oct 18, 2012

Just getting used to elements 11 - the tilt shift in the guided edit does not change when I click on the icon, then click and drag.  I am sure I am following instructions correctly, but nothing changes when I try to rezone the area I wish to have showing without blur. I could do in operation in the expert mode, but it should work in guided edit.

View 7 Replies View Related

AutoCAD 2010 :: Right Click Fly-Out Menu

Feb 6, 2012

While being distracted while working, I inadvertently kept my finger on a key (forget which one), heard a little BEEP, and now my Right Click FlyOut Menu is going somewhere I don't need it to go to. I am getting the 'Snap" options box

instead of 'Last Command' Options Box.

View 1 Replies View Related

AutoCad :: Right Click Menu Shortcuts

Dec 14, 2012

I just installed acad mep 2013 and I'm having some problems with the right click menu. I was using 2012 previously and I would right click, then press M for the move command. Now I have to press V for move in the right click menu. Is there any way to change which keys to press for the right-click menu?

View 3 Replies View Related

AutoCAD 2010 :: Right Click Menu

Jun 21, 2012

i am using autocad 2012 last twoday i was faced this problem i cant edit the text through double click?and i seen some of options missed out in right click menu like ( copy,paste ,rotate ...... finally deselect the objects.

View 2 Replies View Related

AutoCad :: Right Click Menu's Not Working?

May 16, 2013

Don't know how or why this has happened, but my AutoCAD has suddenly stopped showing the correct shortcut menu's when I right click. This happens both in 'default mode' and 'edit mode'. All I get is the default menu instead of my customised edit menu.

I've not edited my CUI nor my right click customisation, but when I've checked them, both are as they should be. I just can't work it out. Also, the delete key won't allow be to delete selected objects anymore.

I'm not sure what was the last thing I did before this error occured, but I think at some point I wanted to press the delete key but may have ended up pressing either the insert, end or home key and maybe for 2-3 seconds. Not sure if these would change anything but thought I should mention it.

Is there anyway these may have been disabled, for example a small insignificant icon somewhere?

View 5 Replies View Related

AutoCAD Inventor :: Get Rid Of Right Click Radius Menu?

Nov 28, 2012

I just had to reinstall Inventor and I forget how to remove the annoying radial menu that pops up whenever I right click.  I just want the normal right click menu. 

Inventor 2013
Windows XP

View 1 Replies View Related

AutoCAD 2013 :: Right Click Shortcut Menu

Aug 29, 2013

I have attached an image...but in 2013 we had an expanded Right Click shortcut menu...so if you clicked on a line for example it would give you alot of options...as you see in the image I do not have all those in 2014.

My "Shortcutmenu" is set to 11

Pickfirst is set to 1.

In CUI I do not see any seperate menus loaded under Shortcut.

View 2 Replies View Related

AutoCAD 2010 :: Double Click CUI Menu

Feb 4, 2013

Trying to change the Hatch double click command from quick properties  to the familiar hatch edit dialog. When I go to the cui, hatch edit doesn't even appear as a command. There a lots of commands that don't appear in the CUI command list.

I added it, but I cannot get it to stick when I drag it to HATCH in the double click list. The the HATCH Advanced element box "ID_QUICKPROPERTIES" is greyed out so I cant retype it to "hatchedit"

It could be because I let autocad migrate from 2008 (pre ribbon) when I installed.

View 1 Replies View Related

AutoCAD 2010 :: Customize Right Click Pop Up Menu?

Apr 23, 2012

In AutoCAD 11 the right click pop-up has clipboard and an arraow you need to slide on to get to the copy, paste, paste as block, copy with base point...Older versions had these clip board features in the pop-up and I hate having one more step to get to the clipboard features. Is there way to customize what shows up with right click?

View 3 Replies View Related

AutoCAD Inventor :: Max Right Click Menu Not Appearing?

Apr 9, 2012

I was working on max using the hair a fur modifery to try and test out something when I noticed somethign strange. When I right clicked in the view port to bring up the options (exsample cut, convert to polygon, hide, fezze ect.) it wouldn't come up. Hears what I've tried. Reinstal max, get a copy of the default interface from a school computer and tried loading that, turning off windows 7 's background color transparancy, removing all things installed right before the problem, run a system check for errors, a viruse scan and right now I'm trying a full restore from a back up. I don't know what's going on. I suspected that my graphic's card drive might be the caulprate but I checked that as well and it says that its all clear. I took the files that had the problem to other computers and they had no issue. It doesn't matter what file I load either this is universal. I can start with a blank file and the right click view port menue won't come up.

Detailed discription:

Launch 3ds max. Go to any view port upon launch. Right click in view port and no menue comes up.

Version:
student 2012
OS:
Windows 7 64 bit
Ram:
8 gigs
Graphics card:
Radeon

View 2 Replies View Related

AutoCad 2D :: Customizing Right Click Dropdown Menu?

Mar 26, 2011

ACAD 2007. I recently had to reload the stock ACAD 2007 interface.... I would like to customize my right click menu (when selecting any drawing space object) to display only clipboard and properties..... right now, when I right click it displays EVERYTHING!

View 1 Replies View Related

AutoCad :: Right Click Shortcut Menu Settings?

Jun 2, 2011

I use Autocad 2011, I appear to have somehow messed up my right click short-cut menu settings. Before, I could right-click and get all of the edit options (delete, move, rotate, draw order, properties, select similar, etc.). I could get these options whether an object was selected or not. Now, my options are the "default" ones (Repeat, Pan, Zoom, Quick calc, etc, to name a few). This happened after I made an adjustment to the drawing in a viewport. Ie. I was in layout, clicked into model space to draw a line, then clicked back to paper space. I NEVER do this (I always switch back to model to edit), except for this one time. Also, if I select an object and hit "delete" on the keyboard, nothing happens. I've already tried adjusting the "shortcutmenu" command number, and nothing really changes in the shortcut menu itself. Also, when keying in a command, the keystrokes used to show up beside my cursor, but now they show only in the command line at the bottom. That's not really a big deal, but I did like the previous function.

View 7 Replies View Related

AutoCAD Architecture :: Right-click Context Menu Not Working?

Sep 23, 2013

I'm using Architecture 2012 and all of a sudden the right-click context menus are no longer specific to the selected objects.  If I pick a door/window tag, I no longer get the specific options to anchor it to a specific door/window.  This is typical of all objects now.  All that ever pops up is the basic context menu. 

View 3 Replies View Related

AutoCAD Inventor :: Client Feature Right Click Menu

Jul 15, 2013

How to add to the right click menu of a client feature in the browser using the API? I'm trying to mimmick the right click menu that pops up when you right click other features like extrusion or hole in the browser. i.e: "edit feature", "redefine",  etc.

View 3 Replies View Related

AutoCAD LT :: 2006 - Right Click Menu Is Not Right / Toolbars Disappeared

Jun 24, 2013

My system crashed and it apparetnly effected AutoCAD 2006 LT.  All my toolbars disappeared, etc.  I now have it all back the way it was except for my right-click menu is all mess up.

Regardless if an object is selected or not, the Snap Menu appears, instead of the one I was used to (that included Erase, Move, Copy Selection, Scale etc. ). How can I get that back?

View 4 Replies View Related

AutoCAD Inventor :: Right Click Menu Transparency And DPI Scaling

May 16, 2013

Is there any way to turn off the menu transparency of the right click menu?  I find it highly annoying in drawings seeing hazy black lines behind text I am readingIs there any way to get inventor to work properly with windows dpi scaling?   It is quite useful to have windows display text a skosh larger than normal but inventor is completely unusable with that option enabled.  text on toolbars disappears and the zoom/pan/orbit goes from fluid to jumpy and useless.

View 2 Replies View Related

AutoCAD LT :: Click Modify Menu - No Object Icon

Apr 11, 2013

Recently updated from 2000 to LT2013. In 2000 I could Modify Text. So far I have found nothing that allows me to Modify Text."To Replace Existing Dimension Text With Alternate Text" it says to "Click Modify menu > Object >Text >Edit." The only Modify menu I can find is the Modify menu at the top showing 12 icons then it's drop down showing 14 more icons. There is no Object icon in that menu. how to Modify Text in LT2013.

View 9 Replies View Related

AutoCAD Civil 3D :: Right Click Shortcut Menu Not Working

May 31, 2012

Not sure what happened, but my right click short cut menu is no longer working. I have verified my right click customization under options and also confirmed that "pickfirst" is on. It was working and then just quite. I have restarted the computer several times but status remains unchanged.

View 1 Replies View Related

AutoCad :: Lost Setup In Mouse Right Click For Menu?

Jan 10, 2013

I lost my setup in the right click for my menu. How can I bring it back?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved