While being distracted while working, I inadvertently kept my finger on a key (forget which one), heard a little BEEP, and now my Right Click FlyOut Menu is going somewhere I don't need it to go to. I am getting the 'Snap" options box
instead of 'Last Command' Options Box.
i am using autocad 2012 last twoday i was faced this problem i cant edit the text through double click?and i seen some of options missed out in right click menu like ( copy,paste ,rotate ...... finally deselect the objects.
View 2 Replies View RelatedTrying to change the Hatch double click command from quick properties to the familiar hatch edit dialog. When I go to the cui, hatch edit doesn't even appear as a command. There a lots of commands that don't appear in the CUI command list.
I added it, but I cannot get it to stick when I drag it to HATCH in the double click list. The the HATCH Advanced element box "ID_QUICKPROPERTIES" is greyed out so I cant retype it to "hatchedit"
It could be because I let autocad migrate from 2008 (pre ribbon) when I installed.
In AutoCAD 11 the right click pop-up has clipboard and an arraow you need to slide on to get to the copy, paste, paste as block, copy with base point...Older versions had these clip board features in the pop-up and I hate having one more step to get to the clipboard features. Is there way to customize what shows up with right click?
View 3 Replies View RelatedNew hardware and fresh upgrade to v2011.
All computers will show the osnap menu when we shift+right click but one computer shows the regular short-cut menu.
How do i make the osnap menu appear with a shift+right click?
My Application Migrate from AutoCad 2008 to 2011.Shift right click osnap menu is not pop up.
View 3 Replies View RelatedAll of the sudden, when I go to the pull down menu and click "Save As", instead of the window opening where I can physically choose where I want to save or save over, I get the file directory in the command line. I even typed in the folder directory and it still doesn't save it there. Why the sudden change?
View 3 Replies View RelatedI intended to add more option at right click shortcut menu. Is it possible to be done?
View 2 Replies View RelatedI have two menus that I use often and I would like to add them to my mouse buttons. Attached is a picture of the two menus I like and the two buttons. The Shift + Click has the correct menu already (Osnap menu2) my problem is adding my custom menu to the CTRL + Click doesn't work. I labeled Osnap Menu 1 and 2, 1 being the custom menu I have use in the past and 2 being the default osnap menu that comes with the cui file. How to get the second button to read my menu rather than both read the same osnap 2 menu?
View 1 Replies View RelatedI just installed acad mep 2013 and I'm having some problems with the right click menu. I was using 2012 previously and I would right click, then press M for the move command. Now I have to press V for move in the right click menu. Is there any way to change which keys to press for the right-click menu?
View 3 Replies View RelatedDon't know how or why this has happened, but my AutoCAD has suddenly stopped showing the correct shortcut menu's when I right click. This happens both in 'default mode' and 'edit mode'. All I get is the default menu instead of my customised edit menu.
I've not edited my CUI nor my right click customisation, but when I've checked them, both are as they should be. I just can't work it out. Also, the delete key won't allow be to delete selected objects anymore.
I'm not sure what was the last thing I did before this error occured, but I think at some point I wanted to press the delete key but may have ended up pressing either the insert, end or home key and maybe for 2-3 seconds. Not sure if these would change anything but thought I should mention it.
Is there anyway these may have been disabled, for example a small insignificant icon somewhere?
I recently upgraded to 2012 but forgot to install the express tools, Doh!. I installed them through control panel repair and everything works. Except when I close and restart ACAD the menu bar express menu disappears. I can bring it back by using cuiload but this is not ideal. Any way to get it to stick?
AutoCAD 2012
Dell Precision T7400, Intel Xeon @3.4GHz
Win XP 32bit 4GB RAM
Nvidia Quadro FX 3700
Cyborg R.A.T. 7 mouse
I just had to reinstall Inventor and I forget how to remove the annoying radial menu that pops up whenever I right click. I just want the normal right click menu.
Inventor 2013
Windows XP
I have attached an image...but in 2013 we had an expanded Right Click shortcut menu...so if you clicked on a line for example it would give you alot of options...as you see in the image I do not have all those in 2014.
My "Shortcutmenu" is set to 11
Pickfirst is set to 1.
In CUI I do not see any seperate menus loaded under Shortcut.
I was working on max using the hair a fur modifery to try and test out something when I noticed somethign strange. When I right clicked in the view port to bring up the options (exsample cut, convert to polygon, hide, fezze ect.) it wouldn't come up. Hears what I've tried. Reinstal max, get a copy of the default interface from a school computer and tried loading that, turning off windows 7 's background color transparancy, removing all things installed right before the problem, run a system check for errors, a viruse scan and right now I'm trying a full restore from a back up. I don't know what's going on. I suspected that my graphic's card drive might be the caulprate but I checked that as well and it says that its all clear. I took the files that had the problem to other computers and they had no issue. It doesn't matter what file I load either this is universal. I can start with a blank file and the right click view port menue won't come up.
Detailed discription:
Launch 3ds max. Go to any view port upon launch. Right click in view port and no menue comes up.
Version:
student 2012
OS:
Windows 7 64 bit
Ram:
8 gigs
Graphics card:
Radeon
ACAD 2007. I recently had to reload the stock ACAD 2007 interface.... I would like to customize my right click menu (when selecting any drawing space object) to display only clipboard and properties..... right now, when I right click it displays EVERYTHING!
View 1 Replies View RelatedI use Autocad 2011, I appear to have somehow messed up my right click short-cut menu settings. Before, I could right-click and get all of the edit options (delete, move, rotate, draw order, properties, select similar, etc.). I could get these options whether an object was selected or not. Now, my options are the "default" ones (Repeat, Pan, Zoom, Quick calc, etc, to name a few). This happened after I made an adjustment to the drawing in a viewport. Ie. I was in layout, clicked into model space to draw a line, then clicked back to paper space. I NEVER do this (I always switch back to model to edit), except for this one time. Also, if I select an object and hit "delete" on the keyboard, nothing happens. I've already tried adjusting the "shortcutmenu" command number, and nothing really changes in the shortcut menu itself. Also, when keying in a command, the keystrokes used to show up beside my cursor, but now they show only in the command line at the bottom. That's not really a big deal, but I did like the previous function.
View 7 Replies View RelatedAny list of the shortcut keys for the Shift-Right Click Osnap Menu?
I know:
E = end
M = midpoint
P = perpendicular
I'm using Architecture 2012 and all of a sudden the right-click context menus are no longer specific to the selected objects. If I pick a door/window tag, I no longer get the specific options to anchor it to a specific door/window. This is typical of all objects now. All that ever pops up is the basic context menu.
View 3 Replies View RelatedHow to add to the right click menu of a client feature in the browser using the API? I'm trying to mimmick the right click menu that pops up when you right click other features like extrusion or hole in the browser. i.e: "edit feature", "redefine", etc.
View 3 Replies View RelatedMy system crashed and it apparetnly effected AutoCAD 2006 LT. All my toolbars disappeared, etc. I now have it all back the way it was except for my right-click menu is all mess up.
Regardless if an object is selected or not, the Snap Menu appears, instead of the one I was used to (that included Erase, Move, Copy Selection, Scale etc. ). How can I get that back?
Is there any way to turn off the menu transparency of the right click menu? I find it highly annoying in drawings seeing hazy black lines behind text I am readingIs there any way to get inventor to work properly with windows dpi scaling? It is quite useful to have windows display text a skosh larger than normal but inventor is completely unusable with that option enabled. text on toolbars disappears and the zoom/pan/orbit goes from fluid to jumpy and useless.
View 2 Replies View RelatedRecently updated from 2000 to LT2013. In 2000 I could Modify Text. So far I have found nothing that allows me to Modify Text."To Replace Existing Dimension Text With Alternate Text" it says to "Click Modify menu > Object >Text >Edit." The only Modify menu I can find is the Modify menu at the top showing 12 icons then it's drop down showing 14 more icons. There is no Object icon in that menu. how to Modify Text in LT2013.
View 9 Replies View RelatedNot sure what happened, but my right click short cut menu is no longer working. I have verified my right click customization under options and also confirmed that "pickfirst" is on. It was working and then just quite. I have restarted the computer several times but status remains unchanged.
View 1 Replies View RelatedI lost my setup in the right click for my menu. How can I bring it back?
View 2 Replies View RelatedWhere the paste on the mouse right click menu is greyed out? Is it maybe a system variable I am missing? Both are on Win 7 Pro 64 and AutoCAD 2013 64bit.
View 5 Replies View RelatedAll of my commands under the right click menu are not responding properly. I make a selection, Right-click, (command) then it asks me to select objects again like it doesnt recognize that i have objects selected..
View 5 Replies View RelatedWhen zooming, I middle click the mouse to bring up osnaps, then type the letter to force the snap I want. That stopped working today: the menu pops up, I type "E", the menu goes away, but it doesn't default to endpoint, there's an "E" on my command line.
I'm not sure if this is a Service Pack 1 issue or not, but I just installed that yesterday.
How do I change the short cut keys in only the right click menu? For example I used to be able to right click then type M for move in 2012. Now in 2013, I have to right click then click V for move. I also used to be able to right click and type O for rotate. Now nothing happens. I have to click again on rotate rather than typing a key. There's a few others I'd like to change.
View 9 Replies View RelatedFor whatever reason the "select similar" command has disappeared from both my right click menu and my cui list when I'm in my personal profile on Architecture... Can't seem to get it back in my personal profile although can access it if I go back to the Autodesk Standard profile.
View 4 Replies View RelatedI'm a creating a Right Click Menu on VBA Form to copy and paste text in Textboxes. I have got the code to work on one textboxt named "TextCat" in the Mouse up event. I would like to be able to use the same code on all textboxes (some in frames) on a form without having to duplicate this long bit of code and change the textbox name multiple times for every different textbox mouse up event. .
Here is the code for a textbox "TextCAt" mouseup
Private Sub TextCAt_MouseUp(ByVal Button As Integer, ByVal Shift As Integer, ByVal X As Single, ByVal Y As Single)'----------------------------------------------------------------------------------------------------'Right Click MenuDim Pt As POINTAPIDim ret As Long If Button = 2 Then hMenu = CreatePopupMenu() AppendMenu hMenu, MF_STRING, 1, "Cut" AppendMenu hMenu, MF_SEPARATOR, 3, ByVal 0& AppendMenu hMenu, MF_STRING, 2, "Copy"
[code].......