AutoCAD Civil 3D :: Make Shift+Ctl+right Click Bring Up The Shortcut Menu?
May 20, 2013
I use the right click as repeat last command a lot, but occasionally I need the shortcut menu and I have to go back and change my settings for right click.
What I would like to do is make Shift+Ctl+right click bring up the shortcut menu, but I cant seem to find it in the command list and when I do searches on google it just brings up stuff about adding an item to the shortcut menu.
Is there a way to make Shift+Ctl+right click bring up the shortcut menu?
View 9 Replies
ADVERTISEMENT
Aug 26, 2010
New hardware and fresh upgrade to v2011.
All computers will show the osnap menu when we shift+right click but one computer shows the regular short-cut menu.
How do i make the osnap menu appear with a shift+right click?
View 5 Replies
View Related
Feb 15, 2013
I have two menus that I use often and I would like to add them to my mouse buttons. Attached is a picture of the two menus I like and the two buttons. The Shift + Click has the correct menu already (Osnap menu2) my problem is adding my custom menu to the CTRL + Click doesn't work. I labeled Osnap Menu 1 and 2, 1 being the custom menu I have use in the past and 2 being the default osnap menu that comes with the cui file. How to get the second button to read my menu rather than both read the same osnap 2 menu?
View 1 Replies
View Related
May 31, 2012
Not sure what happened, but my right click short cut menu is no longer working. I have verified my right click customization under options and also confirmed that "pickfirst" is on. It was working and then just quite. I have restarted the computer several times but status remains unchanged.
View 1 Replies
View Related
Jun 26, 2013
I intended to add more option at right click shortcut menu. Is it possible to be done?
View 2 Replies
View Related
Jan 16, 2013
Any list of the shortcut keys for the Shift-Right Click Osnap Menu?
I know:
E = end
M = midpoint
P = perpendicular
View 4 Replies
View Related
May 23, 2012
My Application Migrate from AutoCad 2008 to 2011.Shift right click osnap menu is not pop up.
View 3 Replies
View Related
Nov 6, 2012
I have an inactive snap shortcut menu. When clicking shift + right mouse button the menu appears but when I typet
"E" for "ENDpoint", "M" for "Midpoint" or when I just click over the respective icons in the menu nothing really happens and I get the following message in the command bar:
"Command: _endp Unknown command "ENDP". Press F1 for help."
or
"Command: _mid Unknown command "MID". Press F1 for help."
I tried following, none of which worked:
1. resetting the main customization file ACA_Global.cuix
2. switching between different profiles and cuix files
3. reinstalling Autocad Architecture 2013
4. uninstalling and Installing Autocad Architecture 2013 service pack 1
5. installing older versions of Autocad (2008 and Architecture 2012)
6. reinstalling Windows 7 and installing Autocad Architecture 2013 again
View 1 Replies
View Related
Aug 29, 2013
I have attached an image...but in 2013 we had an expanded Right Click shortcut menu...so if you clicked on a line for example it would give you alot of options...as you see in the image I do not have all those in 2014.
My "Shortcutmenu" is set to 11
Pickfirst is set to 1.
In CUI I do not see any seperate menus loaded under Shortcut.
View 2 Replies
View Related
Jun 2, 2011
I use Autocad 2011, I appear to have somehow messed up my right click short-cut menu settings. Before, I could right-click and get all of the edit options (delete, move, rotate, draw order, properties, select similar, etc.). I could get these options whether an object was selected or not. Now, my options are the "default" ones (Repeat, Pan, Zoom, Quick calc, etc, to name a few). This happened after I made an adjustment to the drawing in a viewport. Ie. I was in layout, clicked into model space to draw a line, then clicked back to paper space. I NEVER do this (I always switch back to model to edit), except for this one time. Also, if I select an object and hit "delete" on the keyboard, nothing happens. I've already tried adjusting the "shortcutmenu" command number, and nothing really changes in the shortcut menu itself. Also, when keying in a command, the keystrokes used to show up beside my cursor, but now they show only in the command line at the bottom. That's not really a big deal, but I did like the previous function.
View 7 Replies
View Related
Dec 28, 2012
How do I change the short cut keys in only the right click menu? For example I used to be able to right click then type M for move in 2012. Now in 2013, I have to right click then click V for move. I also used to be able to right click and type O for rotate. Now nothing happens. I have to click again on rotate rather than typing a key. There's a few others I'd like to change.
View 9 Replies
View Related
Jun 11, 2012
Am I missing something or has shift-drag / click for deselecting been removed from C3D 2013?
Is this a variable I can re-enable? Or is there a hotfix for this?
View 2 Replies
View Related
Oct 24, 2013
how to reset the menu to pop back up when you right click on a pipe or xref?
View 1 Replies
View Related
Jan 26, 2012
Is there a way to add a keyboard shortcut or marking menu shortcut for visibility? It would be really convenient to be able to shift-click several objects and toggle the visibility of them. I have a mouse with numerous buttons that are mapped to commonly used IV features, but I cannot find a way to map a visibility toggle.
View 9 Replies
View Related
May 21, 2012
how to make a data shortcut to a pressure network? Is this feature even available? It seems odd that this feature would be left out of C3D 2013 when it is critical to plan production.
View 1 Replies
View Related
Dec 18, 2012
I have an image of a room, and I want to add the ability to click different parts to zoom in (by scaling up background image) and have the relevant information appear. I don't know if the best way is to have all the "camera zooms" and information on one timeline (have to manually animate everything dissapearing, fiddly), or to separate them into symbols and call them up?
View 3 Replies
View Related
Oct 29, 2013
A while ago I found out you can deselect something from your current selection set by holding down the shift key and clicking on it. This was a pretty useful tool...but then it randomly stopped working today for me.
View 4 Replies
View Related
Mar 11, 2014
I use the shift+/ shortcut heavily to reset my view centrally and fit it into the screen. Recently though I've noticed it intermittently stops working. I'm running After Effects 12.2.1.5 on Mac OSX mavericks on a MBP Retina 2013.
View 3 Replies
View Related
Nov 21, 2007
I'm shift clicking the lines but they just won't connect!
Using version 8.
View 9 Replies
View Related
Jul 31, 2004
I know this problem is really simple, but I just can't seem to get it to work. I should be able to left-click on a layer, hold in the shift key while left-clicking on a layer further down the list to select multiple layers. It doesn't work, I can't even get the (Alt-Left Click) command to work, allowing me to select individual layers.
Both these commands work in Image Ready and Flash just fine.
I have checked the keyboard settings, but I am not really sure what to look for - nothing seems out of the ordinary.
View 3 Replies
View Related
Aug 1, 2013
Is there a way to create a shortcut for mouse left-click button on the keyboard?
View 8 Replies
View Related
Aug 14, 2011
is this possible. A lot of programs auto-duplicate when you drag and press either the shift or ctrl or alt key. Its a habit ive gotten pretty into. Plus, its a little akward for me to go from a left click immeadeitaly into a right click with the mouse. I always feel like i've dragged the object a little bit when I switch fingers. it would be great to just add a hot key of shift+drag to this feature, wouldnt even have to turn off the standard right click option, I could deal with both being there.
View 1 Replies
View Related
Oct 18, 2012
Just getting used to elements 11 - the tilt shift in the guided edit does not change when I click on the icon, then click and drag. I am sure I am following instructions correctly, but nothing changes when I try to rezone the area I wish to have showing without blur. I could do in operation in the expert mode, but it should work in guided edit.
View 7 Replies
View Related
Mar 25, 2013
I'm used to have the "Enter" and "Repeat Last Command" on the right mouse button. I want to use the shortcut menu on any other free mouse button (I have Logitech Performance MX mouse).
Is there a way to remap the shortcut menu?
View 2 Replies
View Related
Feb 6, 2012
While being distracted while working, I inadvertently kept my finger on a key (forget which one), heard a little BEEP, and now my Right Click FlyOut Menu is going somewhere I don't need it to go to. I am getting the 'Snap" options box
instead of 'Last Command' Options Box.
View 1 Replies
View Related
Dec 14, 2012
I just installed acad mep 2013 and I'm having some problems with the right click menu. I was using 2012 previously and I would right click, then press M for the move command. Now I have to press V for move in the right click menu. Is there any way to change which keys to press for the right-click menu?
View 3 Replies
View Related
Jun 21, 2012
i am using autocad 2012 last twoday i was faced this problem i cant edit the text through double click?and i seen some of options missed out in right click menu like ( copy,paste ,rotate ...... finally deselect the objects.
View 2 Replies
View Related
May 16, 2013
Don't know how or why this has happened, but my AutoCAD has suddenly stopped showing the correct shortcut menu's when I right click. This happens both in 'default mode' and 'edit mode'. All I get is the default menu instead of my customised edit menu.
I've not edited my CUI nor my right click customisation, but when I've checked them, both are as they should be. I just can't work it out. Also, the delete key won't allow be to delete selected objects anymore.
I'm not sure what was the last thing I did before this error occured, but I think at some point I wanted to press the delete key but may have ended up pressing either the insert, end or home key and maybe for 2-3 seconds. Not sure if these would change anything but thought I should mention it.
Is there anyway these may have been disabled, for example a small insignificant icon somewhere?
View 5 Replies
View Related
Dec 12, 2012
I have just been given an new PC and trying to configure as quickly as possible.
I'm using Autocad 2012 and I cannot get rid of the shortcut menu when using the
distance command. F12 works initlailly but only for first part of command.
Shortcut menu always appears.
View 7 Replies
View Related
Nov 28, 2012
I just had to reinstall Inventor and I forget how to remove the annoying radial menu that pops up whenever I right click. I just want the normal right click menu.
Inventor 2013
Windows XP
View 1 Replies
View Related
Feb 4, 2013
Trying to change the Hatch double click command from quick properties to the familiar hatch edit dialog. When I go to the cui, hatch edit doesn't even appear as a command. There a lots of commands that don't appear in the CUI command list.
I added it, but I cannot get it to stick when I drag it to HATCH in the double click list. The the HATCH Advanced element box "ID_QUICKPROPERTIES" is greyed out so I cant retype it to "hatchedit"
It could be because I let autocad migrate from 2008 (pre ribbon) when I installed.
View 1 Replies
View Related
