[URL] ......
I'm trying to place the blue circle at the bottom of the drawing so its radius is 15mm from the mid point of the diagonal line on the right. I've been experimenting with snap points and the from command, but I can't seem to get it just right. I suspect I mess up with the coordinates from the offset point since it's on a diagonal line.
I have been practicing using a older book(copyright 1990) and it has some decent exercises in it. I was able to do this one but it seems I can"t find the proper way to do this..First drawing a line a certain distance..ortho on,click the first point anywhere,move curser to the left and click again. that gives me a line at 180 degrees at what ever length..Line command again starting at the second point of the first line..after clicking that point,I type in @2.38<150 that gives me a line2.38 long at 150 degrees..now how do i make a third line relative to the second line so that the angle is 75 degrees and a certain length..the picture shows what I am trying to draw..using the polar cordinates you get an angle based off the UCS( which is set at world) when you try to draw the third line ..that makes the angle between line 2 an 3 not the angle that I want..To make the drawing,I rotated the ucs -30 degrees..But there has to be a better way than that..
View 9 Replies View Relatedangle.jpg
How can I draw the bottom line, with an angle of 132 relative to the middle line?
How do I place a hole on a circular part at a specified distance from the edge. This works on other parts with straight edges, but there is no option to do so on a circle.??
View 3 Replies View RelatedI need to find the center of a circle that is tangent to another circle and a point on a line. I cannot use tangent tangent radius.
View 4 Replies View RelatedI quickly created a roof and changed the view display to "sketchy". When I show the roof in top view diagonal lines are shown on the sloped surfaces. How do I get rid of them?
View 1 Replies View RelatedA plotting issue that has never been addressed perplexes me! When working in a paperspace layout and trying to plot or print by window or display, I get a partial print or nothing at all. Typically, I will get a partial print showing the drawing above a diagonal line. This has plagued me through many versions of Autocad.
View 4 Replies View Relatedi want to use a diagonal line pattern like the one they use but im new to photoshop and i dont know how to create a diagonal patten.
View 5 Replies View RelatedLately when I plot my drawings the diagonal lines plot gray. I didn't change the line color. Can't figure it out.
View 1 Replies View RelatedI'm making a logo for someone by hand-drawing a font I made up. But because I was having trouble drawing a perfect letter 'O', I'm using the "Circle/Ellipse" tool to do it. I drew an 'O' with that tool that's almost the right size... and I wanna draw another one just a little shorter... but I can't figure out how to place the completed new shape directly over the old one.
I don't know where to start the action with the tool! The completed shape always ends up in the wrong place. How to get my finished shape to complete just where I want it to? (Re-sizing the shape won't work because that changes the thickness of the line I used for the letter 'O'.)
I need to start a Feature Line at a point on another Feature Line 0.100m below the beginning of the existing Feature Line.
View 2 Replies View RelatedI have a gif (as below) and I am trying to remove the strip of yellow you can see diagonally. the image was originally a fawn/yellow/brown colour, but using the 'Replace Colour' tool, I have managed to colour most of it in blue - apart from that yellow strip you can see.
When the image is magnified, the diagonal strip of yellow under the blue appears with the edges all jagged and it looks untidy. Is there a way to make them smoother, or should I begin by doing the whole thing in a different way? I am using Photoshop Version 8.
when using the brush/pencil tool it now only draws straight lines (horizontal and vertical). If I try to draw a diagonal line, for example, it just comes out as a staircase.
View 8 Replies View RelatedIf I do Transform, Move, 40 40 40 0 Copy it seems to just make another line segment on top of the one I already have. I want to copy it down and to the right continually pressing CTRL+D. I think I am making a simple mistake since I have done this before.
View 4 Replies View RelatedI have this cirlce that I have filled with a radial gradient fill that I would like to place an image inside of. The problem is when I put the image in there the background of the image is white so the gradient does not show through...how do I fix this?
View 14 Replies View RelatedIs there any way to locate exact center of a circle in after effects? I made a perfect circle in photo editing program and since layer's boundaries corresponded to circle's edges, i thought that anchor point in after effects will be exactly at the center. but it's not the case - the anchor point is at the center of a composition!
I imported the circle .psd layer together with other layers as a composition, does this have any importance? As i said,the circle layer boundaries corresond with circles edges, not with canvas' edges in my photo editing program. But whe i solo the circle layer, i see that the anchor point is at the center of a composition, not the layer.
So now i have to place anchor point at the center manualy, and it's pretty difficult to do it perfectly. when i rotate the circle, it wobbles and wobbles.
I'm on the brink of insanity with creating my diagonal line pattern. I've tried everything I can think of but the pattern is an absolute mess! I want to create a diagonal line pattern but I want the lines not to be uniform. Basically I've made a group of 3 lines and then one separate line on its own, then to repeat this as the picture below. I've used the distribute function so the distances between the lines is identical everywhere. I've then rotated the whole thing exactly 45 degrees and aligned the lines to fit the bounding box in the "make pattern" mode as shown. Yet the resulting pattern is just a mess of overlap ugliness. All I want is for the pattern to literally look as it does in the image on the left, how to sucessfully do this in CS6?
View 6 Replies View Relatedmy lasso tool pixelates like stairs when making a diagonal line! - has anyone experianced the same thing or know how to sort this problem?
View 2 Replies View Relatedhow to place a dimension on a section line as shown below. This was drawn in SolidWorks but I am trying to convert to Inventor.
View 4 Replies View RelatedQLeader not placing text centered to firstline
I don’t know is this a problem with a lispmy company has set up or whether it is an autoCAD error. When I go to create a leader I type LE withis short on my system for QLEADER. You can then draw your leader or entersettings One I have drawn the leader I go to placethe text the problem I then have is that sometime my text appears below theline (pic 1) and sometime appears next to the line (pic 2)
Pic 1
correct.png
Pic 2
incorrrect.png
In the setting I make sure they are asbelow be sometime is doesn’t matter.
settings.png
(I think this has something to do withdrawing setup or annotation scale.) I have attached a file where I am havingthe problem as well as one that I am not having the problem
Is there a way to keep the selection line to stay after you place the end point? Right now the default (and my guess the only way) just removes the selection line and dots the lines selected.
View 3 Replies View RelatedI am trying to create a dimension in an .idw that goes from a line to the tangent of the outer diameter. I have tried several approaches but I cannot get it to work. Essentially I am trying to replicate a drawing which was created in Solidworks but I am having trouble with this dimension.
View 4 Replies View RelatedHow do i go about placing text/symbols over the top of linework without braking the line. Is there a method of masking out the line with the text/symbol
View 4 Replies View RelatedI know how to change this in illustrator is it possible in draw?
I want to be able to specify the line weight of a path to be either centred on the path or inside/outside the path. How do I do this?
I have a little problem with trim in autocad 2012. After trimming some lines that cut through a circle there's a big gap between the circle and line, so there's no way i can create a polyline. How do I fix it?
here is the figure w/o trimming
pic1.png
Here it is after trimming
pic2.png
And as you can see there is space between the lines. How can I get the line to connect to the circle?
pic 3.png
I am trying to draw the part as shown in attachment. I started off with the base rectangle whose dimensions are 120 * 42. After zooming out completely, it's still too big and takes the entire screen space. If I draw the rectangle and scale it, say by .5, would I have to scale every other line/circle that I draw from there on individually? Or is there a more efficient way to do this?
View 4 Replies View RelatedI would like to know how to make something like what I attach below.Its a circle with radius 112, touching a point on the corner, and the circle must touch some point on the line above precisely.
View 5 Replies View RelatedI am trying to make a circle perpendicular (at its midpoint) to the end of a cylindrical helix in 3D space. I tried using the perpendicular geometric constraint but it won't let me (says "invalid selection"...). Is there a way to make the ucs (z axis) tangential to the end of the helix?
View 4 Replies View RelatedIf there is a way to force the dimension of a line or circle or anything.
For example: If I draw a line and dimension it, it will dimension it to 2.973 let's say, but if I want to change the dimension or the line to 3.300, how would I do that?
Also, after you create a 2D drawing, is there a way to make it a 3D model or extrude the model?
I’ve an already drawn inclined line from a fixed point (saypoint (0,2) on Y-axis). The inclination is also fixed (say 150 tothe horizontal). My objective is to draw a circle with one quadrant at a fixedpoint (say point (1,0) on X-axis), so that, the line becomes a perfect tangentto the circle. The diameter of the circle may vary to make the line perfecttangent to the circle.
View 9 Replies View RelatedTrying to get evenly spaced line segments that lie on the circumference of a circle - every time I do the pattern repetition it gives me line segments the same length instead of constraining them to the circumference of the circle ?
View 1 Replies View Related