AutoCAD Civil 3D :: Relative Elevation On Feature Line
Mar 23, 2012I need to start a Feature Line at a point on another Feature Line 0.100m below the beginning of the existing Feature Line.
View 2 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Feature Line Vertex Elevation Label?
Feb 22, 2010I've seen a label style somewhere that can label the elevation of vertices and elevation points on feature lines. How to style or a procedure for creating a style for this?
I've found a couple of blogs that layout the steps for a style but it seems there are a few ways to do it so I'm looking for what could be considered the most effective/versatile approach.
AutoCAD Civil 3D :: Convert Feature Line Elevation Point To PI
Nov 6, 2013Is there a way to convert a feature line elevation point to PI?
My objective here is to delete all the elevation points except one. It would be time consuming to pick each elevation point and delete them individually (in this case there are about 15 but sometimes there are more). I want to use the delete all option but keep one one of them. If I can convert that one into a PI I could then quickly delete the remaining elevation points.
AutoCAD Civil 3D :: Feature Line Elevation Editor In 2013
Oct 13, 2012The way I used to adjust feature lines was to highlight the node I wanted to adjust and then raise or lower that elevation incrementally until I got to a grade that worked.
Now I've noticed that when I highlight a node and hit the button to raise or lower, it forgets which node I had highlighted after the first press. This is a problem because now I either have to click on the node every time, because if I don't it will raise or lower the elevation of the entire feature line.
AutoCAD Civil 3D :: Elevation Table From Alignment Or Feature Line?
Mar 17, 2012I need elevation data from a surface. I need an elevation every 15' along an alignment or feature line. I would like the information as a table. I am not sure how to do this.
View 5 Replies View RelatedAutoCAD Civil 3D :: Feature Line Elevation Editor Point Marker?
Mar 24, 2008Is there any way to increase the size of the marker that shows up on the plan view when you select a PI in the elevation editor? It is so small that if I have the feature line selected I can't see the marker over the highlighted line. I generally have to zoom to a PI so I can see where I am.
View 6 Replies View RelatedAutoCAD Civil 3D :: Insert Elevation Point On Feature Line By Grade
Nov 7, 2013C3D 2012
I want to set and Elevation Point (not a PI Point) along a feature line by entering the grade from the previous point. Currently the "Set Elevation Point" command only allows entering an elevations or getting an elevation from the surface. I know I can set an elevation point and then use the "quick elevation editor" to adjust the grade, but I don't want to go through the extra step.
AutoCAD Civil 3D :: Add Elevation Labels At Any Position On A Feature Line Without Having To Create A Surface?
Oct 31, 2011Is there a way to add elevation labels at any position on a feature line without having to create a surface?
View 9 Replies View RelatedAutoCAD Civil 3D :: How To Color Contour Relative To Elevation
Dec 11, 2013I would like the contour line colored to reflect the elevation it is depticting! I have successfully used surface properties - elevations - to create ranges, and to FILL color in between contours, but is there a workflow to color the contours themselves?
I also noticed, within the same dialogue box in surface properties, a contour pull down - but it doesn't have near the control to set elevation ranges, nor does actually effect the contour color.
AutoCAD Civil 3D :: Transition Grading - Adding Relative Elevation
Jul 13, 2012I have a grading that, going left to right has a a region of relative elevation, a transition followed by another region of relation elevation.
I need to change criterior of the transition region to another relative elevation with the appropriate transition on either side.
I deleted the original transition grading (with the menu commands) and tried adding the 3rd relative elevation but keep getting prompted for a transition length instead of the relative elevation (I am choosing relative elevation criterior). It seems the feature line doesn't want to let go of the original definition. I should be able to replace that original transition with a new criterior, No?
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
AutoCAD Civil 3D :: Elevation Feature Lines In Table
Aug 29, 2012I would like to add elevation values of start and end of feature line segments within a table. I can set up start and end co-ords but can't seem to find where I can add the levels?
I can add lables to the plan with levels but really would like to have a table as well as some of the segments are too small to lable on the layout.
AutoCAD Civil 3D :: Remove Feature Line Used As Break Line When Creating Surface
Dec 11, 2012I needed to remove a feature line that I used as a break line when creating a surface. When I removed the feature line from the definition of the surface, the grading did not change. It appears the points created by the feature line remain which is why grading didn't change. The only work around was to delete these points.
I noticed the same thing happens when I removed the surface boundary and inserted a new boundary. why these points remain and how to remove when I delete boundary and feature line from surface?
AutoCAD Civil 3D :: Feature Line Projection
Sep 26, 2013Is there any way to project feature lines into a profile when the plan view is xref'd? I have my plan view "existing topo" with all existing features/Figures and a existing surface.
My profile is a separate dwg with plan view xref'd and surface a data shortcut. Of course there are feature lines and Survey Figures in the existing top I want to project into the profile, but can't because it is an xref. Besides copying .
AutoCAD Civil 3D :: Using Feature Line Method?
Oct 31, 2013C3D 2012. I am trying to get the distance from the start of a featrue line to a selected point. My object is "FLobj" and my Point is PT1. I am using the method Get2dDistanceAtPoint. This is the line of code.
(vlax-invoke-method FLObj 'Get2DDistanceAtPoint pt1 'pDistance)
I keep getting "too many actual parameters".
AutoCAD Civil 3D :: Feature Line Name To Label?
May 19, 2013I am wanting to add the name of my feature line to a label style. I am trying to create a label style that will show Lot Number and Area. I know i can create parcels, but i dont want to! I have also created a map table that can do exactly what i want on polylines, but will not work on an xref. Labelling featurelines does work in xrefs.
how to add the name into a label style?
AutoCAD Civil 3D :: Can Decurve A Feature Line
Jul 11, 2007Is there a way to decurve feature lines like how we do it with polylines? I am labeling my feature lines but don't want the curve labels to show up
View 6 Replies View RelatedAutoCAD Civil 3D :: Arc Or Feature Line As Breaklines
Jan 7, 2014I am building a surface and have back of curb, curb face, and curb flowline going around a curve. I cannot create the lines with the usual pline as they will cross due to poor field collect. I created the curbs with multiple arcs. I was then going to change them into Feature Lines and am wondering if I can then use them as breaklines in a surface.
View 1 Replies View RelatedAutoCAD Civil 3D :: Feature Line From Profile?
Mar 1, 2013I have a roadway alignment with FG profile and I want to place a feature line on the roadway centerline that represents the FG profile elevations.
View 7 Replies View RelatedAutoCAD Civil 3D :: Feature Line Styles
Apr 11, 2012We have cooridors with features such as terrace drains and flowlines, but we cant seem to get the linetypes to show up correctly. For example a flow line should have arrows but it shows up without the linetype and looks continuous.
LTSCALE =1
MSLTSCALE=1
PSTSCALE=1
DRAWING SETTINGS - 1"=40'
CIVIL 3D 2012
AutoCAD Civil 3D :: Corridor Feature Line
Jan 7, 2014I am building a corridor with the right side of the pavement fitting to the existing surface.The subassembly used to link the edge of pavement to the existing ground is LinkSlopeToSurface.
On the corridor created, the feature line (code P2) of the corridor surface (top) starts from the station 0+025, instead of 0+000.
I was wondering why there is no feature line P2 for station range 0+000 to 0+025? Does that mean the linkage to the existing ground surface not exist for the slope defined in the subassembly?
AutoCAD Civil 3D :: Feature Line Elevations
Mar 25, 2013We are running Civil3d 2012. When converting a line or 3d poly to feature line, or just creating one it adds elevation points where it crosses surface breaklines even if you do not assign elevations. We want the feature to just have 2 elevations. The beginning and end. Is this a bug? Or is there another setting somewhere?
View 7 Replies View RelatedAutoCAD Civil 3D :: Tie Feature Line To Surface
Sep 4, 2013I created a label for retaining wall that takes the z value from the start and end of a feature line. Works great except that it isn't dynamic. I have created the feature line in a grading sheet where the surface is data shortcut into it and I'm just using grips to make sure the ends are on the bottom and top of the retaining wall. Is there any way to dynamically pin/tie the feature line to a surface that has been data shortcut?
View 9 Replies View RelatedAutoCAD Civil 3D :: 2012 Feature Line Crashes?
Apr 6, 2012AutoCAD C3D 2012 has been crashing nonstop over the past 3 days on me whenever I try to "Create a Feature Line from Object". I know that it is a localized problem as a co-worker has been in the same drawing and done grading work without any problems. The error has occurred in multiple drawings.
Product Version: F.107.0.0. AutoCAD Civil 3D 2012 SP1
AutoCAD Civil 3D :: How To Create Feature Line From Profile
Jul 15, 2013is there a way to draw a line in the profile view and create that line into a feature line? and if there is can i project that line into the plan? i know that you can make a feature line in the plan and project that feature line into a profile view, just wondering if you could basicly do the reverse. i don't want to make a coridor.
View 4 Replies View RelatedAutoCAD Civil 3D :: Can't Edit Elevations Of Feature Line
Apr 19, 2012I Created a Feature Line from Objects (a polyline). I added it to Site 1, gave it a name, layer. Do I Assign elevations during creation (conversion options)?
I set the Elevation to 8.5 (NOT From surface)
Then I go to
Modify Feature Line -
Elevation Editor.
Why are the elevations locked? I want to set them.
AutoCAD Civil 3D :: Feature Line Edits Jump Across
Oct 15, 2013Why do they do this? I am trying to quick elevation edit a featureline but my edit glyph jumps to a completly different featureline that is near.
View 3 Replies View RelatedAutoCAD Civil 3D :: Feature Line Icons In Toolspace?
Apr 11, 2012why this particular FL has this type of a display?
View 1 Replies View RelatedAutoCAD Civil 3D :: Break A Closed Feature Line
Jul 28, 2011I often use feature lines for parking lots and ponds. They're great when they work, but they drive me NUTS when they don't - which is a lot of the time. For parking lots and ponds, my feature lines usually close back on themselves. That's when I have trouble breaking the feature line. When I use BREAKFEATURE, I choose two points and this should, in theory, leave a gap in the feature line between those two points. That's not what happens. I end up with a huge gap between the first point I picked and a vertex point 5 or 6 vertices away. It doesn't matter where I pick the breaking points.
I've also tried TRIMFEATURES. I draw lines across the feature line where I would have chosen the breaking points. But the portion that I want to remove is the portion that always remains. It doesn't matter where I select the feature line to be trimmed (inside or outside of the cutting edges).
I think there may something wrong with the feature line itself. Sometimes, if I erase the original and draw a new one, it will trim just fine. But that's such a headache, and it doesn't always work. If I knew what was causing the feature lines to go squirrely, I would aviod it. Unfortunately, it seems like breathing the wrong way can screw up a feature line.
AutoCAD Civil 3D :: Grade One Surface To Another Like Feature Line?
Jul 12, 2013I was wondering if there is a way that I can take an existing grade surface and apply a designed pond surface.
Right now I have the pond as a set of 3d Polylines in the proper geometry.
I want to place the pond into this surface and cut/fill at a 3:1 from that pond to the existing surface.
AutoCAD Civil 3D :: Creating Feature Line Between Two Red Points
Mar 26, 2012I have a problem about creating feature line. When I want to create feature line between two red points, another point come into being by itself (blue point). If you look at the file I have attached, you will understand well what I want to express. I cant make any changes on this point. I cant delete, modify etc.
View 4 Replies View RelatedAutoCAD Civil 3D :: Possible To Edit Feature Line Via Section?
Oct 22, 2012I have a complex grading situation with a sewer near a drainage channel. Long story short.... I need to somehow look at my alignment section by section and try to establish a feature line that will represent my proposed top of slope. There are a ton of different constraints that I will not go into. My ultimate need is the ability to establish a feature line or 3d pline from the section view. I know that this is somehow possible via corridors. Im working with just an aligment and cross sections at every 25 feet. Is this possible?
View 3 Replies View Related