I am using script to create my drawings. I am facing one problem in trim option. I'll explain the scenario..
i created one profile in one layer and then i freezed it. then i created another layer and creating another sketch and performing trim option, while that time it trims based on the sketch in the freezed layer. I dont know how to solve it... I have attached the script of it..
At my company we have a custom CC library with custom profiles for use in frage generator. We are having a problem with one of the frames. Everything goes well when the profiles is inserted.
But when I try to "trim to frame" the intersections of two profiles, it does not trim them correctly. It trims them in a 45 degree angle. As you can see on the attached jpg file.I tried everything. Checked the sketch, deleted the profile, republished the part.
New to Revit. Using 2012. I'm trying to add a double hung window to a wall and get the following error message:
Can't make type "Double Hung with Trim : 36" x 48"
- Error 1
-- Windows : Double Hung with Trim : 36" x 48" - Mark 22 : id 172423
-- Type : Windows : Double Hung with Trim : 36" x 48" : id 172439
I get the same error message no matter what size I try to use
How to trim the object using VB coding
View 3 Replies View Relatedis there a way to trim an alignment?
View 3 Replies View RelatedHere I enclose file Cam_Profile.ipt, this is a spline curve made from an Excel matrix with 670 points in 3 decimals accuracy (VBA editor)
Extruding is not possible because of self intersecting path.
I want to trim both two free ends from the intersection and also close the intersection for extruding this profile. However ....., without displacement of any current point in the perimeter of the closed spline!
I drew 2 circles with ttr command (1 and 2). The problem is when I try to trim them to remove the part I don't need, it doesn't work cause the circles 1 and 2 aren't stick with the borders as they should. At the 4 red circle points, if you zoom you'll notice they don't stick the border, never faced this problem before (usually I cut the part I don't need without problem). I've done regen/all but doesn't seem to fix that problem.
View 9 Replies View RelatedThe yellowcurve is created by progect geometry of red circle on a solid(I delete solid after that).and there are some lines on circle and parallel to projection vector. now I,m going to trim or extend these lines by yellow curve. trim and extend don,t work and there is no intersection point between blue lines and yellow cure . What should I do?
View 4 Replies View RelatedWhenever I try to trim two intersection arcs who have the same bending direction and similar radius, casue it is extremely hard to click on the parts that need to be trimmed off. See attached pic for reference.
View 2 Replies View RelatedWhen I use trim or extend commands and have to zoom or pan to select additional objects the command drops selection in previous view and only edits items in current view when executed.
Is there a system variable I can use to change this little time waster?
I moved to a new PC the other day and have not been able to extend or trim to a line that is not connected. I figured it would be an apparent intersection but maybe I haven't got my settings right as it's not working. I am having to drag the lines right now and it's not very accurate!
View 2 Replies View RelatedHow can I trim entities in an array? I can make the array just fine, but I don't know why it won't let me trim them. I suppose it's trying to keep references to the array and the original entity that the array is based off of, but at this point I don't wish to keep that information.
View 5 Replies View RelatedHow can i set tolerances for trim and dimensions just so it won't give me a difference of .01 gap?
View 2 Replies View Relatedhow do i trim away the section on RevolutionSrf1 underneath features RevolutionSrf2 and LoftSrf1 ?
Inventor 2012
I am using AutoCad 2007. Is it possible and if so how do I trim, clip a block?
View 5 Replies View RelatedThese polylines will not Trim or extend to the arc. Works fine if I Explode them to lines. Z=0 also.
View 4 Replies View Related9 times our of 10, I can't trim away the overlap on a pair of circles.. as every now and then the trim suddenly decides it will work!
Trim_Issue.jpg
I just can't work out why these pesky circles refuse to trim! I'm trying to merge them into one 'cloud' like shape, by removing the overlapping section from each circle.
Why can't I trim a FeatureLine with a circle. I just tried and AeccTrimFeatures won't accept a circle as a cutting edge.
View 3 Replies View RelatedI am having trouble with a part that I am working on. Trying to trim to the tangent edge. I cant post the part that I am actually using, but here is an example of a similar problem. In the attached file, open the "Negative Part.ipt". The sketch 2 contains a line (unconstrained). I need this line to be tangent with the curve below it.
I can project the edge of the curve to my sketch plane, but not the tangent of the radius.
Windows 7 x64 -12 GB Ram
Intel i7-930 @ 3.60ghz
nVidia GTS 250 -1GB (Driver 301.42)
INV Pro R2013, SP1.1 (update1)
Vault Basic 2013, SP1
I need to Trim or Extend Sketches. Is there any API to access the Trim/Extend Tool?
View 1 Replies View RelatedI'm working on this model and I am trying to use the surface trim command in cad 2011, but its not working and its pissing me off. I want to use the trim and use the dome in my model as the cutting edge to cut the parts of the curved walls that fall inside the dome but it is not working. I have the file uploaded.
View 1 Replies View RelatedMy Client save AutoCAD 2012 file into AutoCAD 2002. Now he is facing a problem that whenever he is working on that file some commands in AutoCAD 2007 like Extend and Trim is not working on existing lines and X-ref lines. And when i open that file into AutoCAD 2012 and 2013 then all commands are working.
when he create new line and try to use these commands then all commands are working but when he try these commands on existing lines and X-ref then commands are not working.
i'm a Autocad 3D newbie! Have some problems to figure out how to trim a solid from a sphere. well here's an image that will explain better!( it's the pink part from the green)
View 2 Replies View RelatedI have a drawing of tower in 3d, i want to put all the drawing in 2d only so that i can trim some part of the lines, is it possible to put the 3d in 2d in one level only, i mean one axis.
View 9 Replies View RelatedI am finishing up the exterior design of a building which consists out of metal plating which should be laser cut with a pattern. Now I drew the lines for the laser cutter as a template which will fit the pattern into the contours of the exterior design. Only problem which occurs is that my pattern, which I have group to easily copy, creates very slow desktop performance.
How to I external trim all the groups at once because it does not seem to do this. I can´t attach the cad-file because manager won´t let me. but it trimmed some of the group but not all the lines in them. How is this possible? I've tried blocks but they don't clip either.
untitled.jpg
Is there a way to convert those lines into plines, so i could extrude and cut.
I'm a Autocad 3D newbie! How to trim a solid from a sphere. well here's an image that will explain better!( it's the pink part from the green) .
View 8 Replies View RelatedThis problem has cropped up in the last few months. It only happens intermittently.
Typically I select Trim, or Extend command, right click to select All rather than a specific object, then selcet the objects to be trimmed or extended.
Sometimes though, the All command is not activated and I have to select the object to be trimmed or extended to, then select the objects to trim, etc. Then the next time I right click for All it works.
difference between Trim and Pline Boolean operation?
View 5 Replies View RelatedHow do I extend a line to a block or trim? seems like every time i trim or extend the line to a block the line won't recognized/notice the block. what can i do?
View 1 Replies View RelatedI am using Autocad 2010. I have been using 2008, but recently upgraded. I have a project that one particular file is driving me nuts! I can not use trim or extend on any existing line work. However, if I draw two non intersecting/crossing lines and ust the 'TR' command it works fine. I have checked to see if all lines are in the same plane and the appear to be. The only way I can trim or extend is if I use the 'Flatten' command.
View 6 Replies View Related