AutoCAD Civil 3D :: Merge 2012 Pipe Catalog Into 2013?
Sep 27, 2012I have install Civil 3D 2013.
In my 2012 release I added several parts into the pipe catalog. I would like to merge those 2012 parts into my new 2013 pipe catalog.
ADVERTISEMENT
AutoCAD Civil 3D :: Transferring Pipe Catalog From 2012 To 2013?
Apr 18, 2013We previously switched from 2010 to 2012, i transferred our pipe catalog with custom pipes. I though i did it right, but when i started editing pipes that were started in 2010 the pipe sizes were automatically changing to the wrong size after edit.
We are about to upgrade from c3d 2012 to 2013, i don't want this to happen again. proper way to transfer our customized pipe catalog?
C3D 2012, SP1
Win7 - 64bit
AutoCAD Civil 3D :: SUDAS Pipe Network Catalog
Oct 11, 2013Is it possible to get a Pipe Network Catalog for SUDAS specifications??
View 3 Replies View RelatedAutoCAD Civil 3D :: Pipe Size Does Not Match Catalog
Apr 20, 2012For some reason two of my pipes in my catalog want to draw themselves larger than they should be. Took a look in partbuilder, everything looks fine.
C3D 2012, SP1
Win7 - 64bit
AutoCAD Civil 3D :: Creating Pipe Network Catalog?
Jul 15, 2011creation of new pipe network catalog, such as creating pipes, structures, rules etc.
can I do it from AutoCAD Civil 3D itself or ?
AutoCAD Civil 3D :: Not Reading Pressure Pipe Catalog
Feb 8, 2013I just recently had to do a clean install on Civil 3D 2013 to fix a different problem but now I am having issues with the pressure pipe catalogs. I used to be able to open and use all three that are available, push on, mechanical, and flanged. I made sure that my support paths are mapped to the correct folders but now when I open my design file I find that the mechanical and flanged catalogs are greyed out. When I try to edit the part catalog I get a warning message saying that the catalog is not available. See the attachment. I know the catalogs are there as I have created parts and added them to these catalogs. It almost looks like it is mapping to the metric folder which only has the push on catalog.
View 9 Replies View RelatedAutoCAD Civil 3D :: Pressure Pipe Catalog Not Recognized?
Nov 8, 2013I think this question should be so easy to answer, that I am feeling a bit foolish for asking, but here goes. I am trying to set my pressure pipe catalog, but when I browse to C:ProgramDataAutodeskC3D 2014enuPressure Pipes Catalog and hit open, I get a dialogue that states "There are no Pressure Network Catalogs in this folder". I have tried selecting folders farther down the list (Imperial, Imperial_AWWA_Flanged, etc) with no success. I have opened the sqlite files using the Content Editor, and I can see all the parts and sizes there. I just can't figure out how to open the catalog from Civil 3D.
C3D 2014, SP1
Dell Precision T3500, Windows 7 64-bit
AutoCAD Civil 3D :: Set Pipe Network Catalog File Location?
Jan 30, 2012I know I can go into the AeccSetNetworkCatalog command and set the file path but I want to do it pragmatically. Is there any way to do this? If so I don't know where it is located?
View 2 Replies View RelatedAutoCAD Civil 3D :: Changing Pressure Pipe Catalog Location - 2014
Nov 22, 2013I copied the pressure pipe catalogs to our local network and in C3D 2014 set the catalog to the network location.
When I close C3D and reopen, it reverts back to the original catalog location on my C drive.
Setting a different location for regular pipe networks works fine.
Is there something I'm missing or does this method not work for pressure networks.
Civil3D 2014 SP1
Win 7 Professional - 64-bit
HP Z400
Xeon W3550 @ 3.07Ghz
24GB of RAM
Nvidia GeForce GTX 760
AutoCAD Civil 3D :: Pressure Pipe - How To Create New Fittings And Add To Content Catalog
Apr 4, 2012C3D 2013. I am trying to determine how do add additional content to the parts library.
I have explored the Content Catalog Editor and have been able to add new pipe materials, but it appears that the only way that I can import a part is with a .CONTENT file. Is there any documentation on how this file is supposed to be configured or created? Is there any documentation on the Content Catalog Editor in general? We need to be able to add new pipe, fittings, valves, appurtenances in order to make this new feature usable in a production environment.
AutoCAD Civil 3D :: Can't Edit Material In Pipe Properties 2012
Aug 5, 2011I created a pipe network using Civil 3D 2011 and we upgraded to 2012 in the middle of the process.
I've always been able to edit the MATERIAL of the pipe for (I like to add class and type in this column)
It worked fine in 2011 as you can see in the first image.
But in 2012, the material changes that I added in 2011 chow up, but I can't edit them or revise them.
it causes me to have to label my pipes in the label editor instead of assigning the material property in the pipe properties with-in my pipe network.
Currently operating Autodesk Civil 3D 2012, AutoCAD 2012, Bentley MicroStation V8i
Maya :: 2012 And 2013 Merge Vertex Tools Not Working?
Mar 5, 2013I'm having problem with this tool in maya 2012 it doesn't connect or do the red mark between 2 vertices but in maya 2013 it does the red mark between them but doesn't connect
View 1 Replies View RelatedMaya :: 2012 / 2013 Merge Vertex Tool Not Working?
Mar 5, 2013I'm having problem with this tool in maya 2012 it doesn't connect or do the red mark between 2 vertices but in maya 2013 it does the red mark between them but doesn't connect
View 1 Replies View RelatedAutoCAD Civil 3D :: Pipe Network Cross Section Labels In 2012?
Dec 29, 2011In 2011 the pipe network cross section labels had to be exploded or they would disappear once you closed the drawing (even with saving).
In 2012 can you close and open a drawing and have the labels not disappear?
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
AutoCAD Civil 3D :: 2012 Program Crashes When Attempting To Draw Pipe Network
Feb 28, 2013My program crashes when attempting to edit a pipe network. specifically when trying to draw a pipe the program crashes the instant I select the second point to place the pipe.
View 3 Replies View RelatedAutoCAD Civil 3D :: 2012 Edit Pipe Networks Set Inverts At Inside Edge Of SDMH
Apr 26, 2013I created a pipe network from a object (alignment wLpolyline) I want to set my inverts at the inside edge
of my SDMH not the center. I go into Edit Pipe Networks then the vista (table). I don't see a option to do that.
Is there a setting in the SDMH structure style or somewhere else?
As an example I come in at 6250.0 at inside a 48" MH and go out at 6251.0 at other side of MH.
I wanted to use a catch basin that shows the depressed curb & lip like the one in the Pipe Network Video
but it not in my parts Library even when I create a full parts list it still isn't there. Is ther a way to go on line and download part structures?
AutoCAD Civil 3D :: Parts Of Pipe Part List Missing In 2014 Fine In 2012?
Jun 25, 2013We have a pipe part list that we have based of our own catolgue and it work fined in our template in 2012 and how we have upgraded to 2014 part of the list does not appear in the drop down selector see the screen capture attached? and figured out what caused it.
View 1 Replies View RelatedLightroom :: How To Merge Catalogs By Importing A Catalog Into A Master Catalog
Dec 15, 2012I'm using Lightroom 1. I tried to merge catalogs by importing a catalog into a master catalog, but there were some problems. The one I noticed immediately was that the collections are not correct. It imported the collections, but for example one collection now has only 4 photos when the originbal had 140? How can I fix that? (Although not necessariy a problem, it seems to have the wrong number of photos imported too. It says the previous import was 3175 photos when it was more like 10,000.)
View 2 Replies View RelatedLightroom :: How To Merge Catalog 4.4 (empty) With V3 Catalog With Many 1000 Photos
Apr 29, 2013I had to reinstall an OS in my computer due to a virus. As a result LR 3 in no longer installed. I still have the catalog on a backup disk and have just installed and updated to LR 4.4. What is the best way to merge the V3 catalog with V4 and are there any things I should expect or look out for?
View 2 Replies View RelatedAutoCAD Civil 3D :: SSA 2013 Simple Flow Into Pipe
Sep 14, 2012I have a simple catchment area that I've routed to an inlet and then to an outfall. The 10 year storm peak flow going into the inlet is 3.91 cfs and my flow in the link to the outfall is 10.55 cfs. I do not understand why it is increasing going into the pipe. I've attached the pdf results here because for some reason it won't let me attach.spf file.
View 4 Replies View RelatedAutoCAD Civil 3D :: 2013 Pressure Pipe Fittings?
Jul 15, 2013I am currently using C3D 2013 for pressure pipes. how to rotate a TEE with the branch pointing down in plan? Currently the TEE will come in with the branch pointing only horizontal in plan.
View 3 Replies View RelatedAutoCAD Civil 3D :: Pressure Pipe Network In 2013?
Nov 20, 2013Using the Pressure Pipe Network in Civil3D 2013? I just recently began developing an Apputenace library for all the parts we use that were not included with the program. I have run into a few big issues that could prevent our firm from using this potentially useful tool. One issue, does the PPN posses the ability to create structures like manholes? This could be a really break point for using it to do a sewer line. Another, how well does it interact with multiple surfaces? If I have two surfaces butted up to one another how to a get a PPN from point A on surface 1 to point B on surface 2 and have that PPN respond at the correct bury depth while creating the correct fittings? As I experiment more this this tool I feel as if there are way more questions about what it can and can't do compared to what a regular pipe network does.
View 1 Replies View RelatedAutoCAD Civil 3D :: Pipe Network Layers 2013
Dec 11, 2012When a pipe network is referenced into a drawing in Civil 3D 2013 there is an option to set the layer for the pipes and structures. After the layer is set, the parts go onto these layers until the network is syncronized. After the network is synronized the parts revert back to whatever layer is set in the object layers in the drawing settings.
Civil 3D 2013 SP1
HP z400 Workstation
Intel Xeon CPU W3520 @ 2.66 GHz
NVIDIA Quadro FX 580
Windows 7 64bit
12 GB RAM
AutoCAD Civil 3D :: Pressure Pipe Networks In 2013?
Aug 2, 2012So I wanted to put my existing 2d linework for a water main into a pressure network. I have done quite a bit of reading about pressure networks and the lack of different pipe materials and apputenances to choose from. It seems as though the fittings are all there for the most part.
The way I understand it is the only pipe material that is shipped with C3D is Ductile Iron and if you want PVC or something else, you open the content catalog editor and change the dutile iron pipe to polyvinyl chloride (PVC). Am I on the right track here?
As far as appurtenances go, when I open up the Content Catalog Explorer there is nothing for hydrants, valves, wyes, etc...... Is the only thing I can show then bends?
AutoCAD Civil 3D :: 2012 - Pipe Structure Editing - Changing Preset Lists For Structure Sizing
Nov 4, 2011We use C3D 2012 (metric only) - We are attempting to customize our list of structures for Sanitary Sewers. The structure list shows sizes we do not use and we would like to modify them. However, when we try to select the "Inner Diameter" it displays a list of sizes that we can not seem to modify or add to.
I have looked at some of the XML files to try and modify or add new sizes (example: AeccStructConcentricCylinder_Metric.xml) , but they do not seem to be recognized even after I restart the program.
Here is what the file looks like:
<ColumnConstList desc="Inner Structure Diameter" dataType="float" unit="mm" name="SID" id="CCL1" visible="1" context="StructInnerDiameter" index="0">
<Item id="i0">1200.0000</Item>
<Item id="i1">1350.0000</Item>
<Item id="i2">1500.0000</Item>
<Item id="i3">1800.0000</Item>
<Item id="i4">2050.0000</Item>
<Item id="i5">2300.0000</Item>
<Item id="i6">2550.0000</Item>
I tried modifying the last line replacing 2550 with 3600.
I also tried adding a line <Item id="i7">3600.0000</Item>
I saved the XML file and restarted the program with nothing changing that I can see.
Looking for correct file(s) to edit so I can modify the LISTS that come up in the piping modules.
AutoCAD Civil 3D :: 2013 Pressure Network Pipe Data
Apr 11, 2012I've been really excited to know Pressure Network modelling is finally coming to Civil 3D with 2013 release. However I've got no clue why any pipe data won't display in Profile View.This makes absolutely no sense in pressure network profiling since you can't output any pipe data to profile view tables. Note pipe data outputs great for regular Pipe Network profile views.
Another thing I'm disappointed in is no ability to output Uphill Tangent and Downhill Tangent for pressure network pipes. Both values are given in Vertical Geometry Band type. Thus they are being obtaned from Profile but not Pressure Network Pipe data. Since in Pressure Networks it's only a couple of pipes that are being curved to match surface line it's impossibe to get Tangets. Sure you can duplicate surface profile and get required data using Vertical Geometry Band type. But it make no sence since it's too much hustle.
I'm quite sure I'm missing something here. Probably there's a way to add required data styles to Band types? Or modify Label styles Contents data sources?
AutoCAD Civil 3D :: Calculate Head Loss With 2013 Pressure Pipe?
Dec 7, 2012How can I perform head loss calculations with the new pressure network feature in C3D?
I would like to use C3D 2013 to calculate water distribution networks... Is it possible or should I export to EpaNEt?
Autocad Civil 3D 2013 - Infrastructure Design Suite
Windows 7 64 i7 860 @2.80GHz 8GB Ram Quadro 2000D
AutoCAD Civil 3D :: Import Pressure Pipe Appurtenances (Fitting) In 2013?
Sep 11, 2013I am designing pressure pipe network for water supply line in civil 3d 2013.In that ,I am not able to insert 90 degree bends,change pipe properties know that there is default bends available in civil 3d but I need more fittings and different dia pipe. I asl know that in C:program dataAutodeskenupressure pipe fittings in that all fittings are available and SSL there is .*sqlite file available. But I Don't know to how to import this pipe fittings in civil 3d 2013.
View 3 Replies View RelatedAutoCAD Civil 3D :: 2013 Pipe Networks Reference Surface Amended
Sep 9, 2013I have designed a pipe network in Civil 3D 2013, first I created a rule set for both structures and pipes, then I created a parts list, next I built my network.
Where more than two pipes connected to one structure, I found 'applyrules' couldn't align everything appropriately, so I had to manually amend the levels in 3D to ensure the pipes connected correctly (soffit to soffit / top invert to top invert).
My problem is that after doing all this, the surface model has been amended! I have changed the reference surface in the network properties and in the vista. The rim height of my structures seems to have been adjusted in the most part but my pipes have not.
In areas where the surface has gone down, my minimum cover is violated. Is there a way to move the pipes back down to minimum cover, without using 'applyrules', as using that command would change the gradients to the minimum, some gradients have changed during my manual adjustments.
Furthermore, where the surface model has reduced in level significantly, my pipes are now above the surface and the manhole has stayed there too.
AutoCAD Civil 3D :: Convert From 2013 To 2012
Jun 27, 2012Is there anyway to go back to 2012 once you've opened a file in 2013?
I would like to recover work done in 2013, at least the styles...
I've found out that I can export pipe networks to landxml and then import the file in 2012, but I have no styles if I do that...
Using Building Design Suite Ultimate 2014
AutoCAD Civil 3D :: Getting 2013 Linetype Set Into 2012?
Jun 18, 20132013 has a linetype called "proposed tile" and another one called "existing tile." 2012 doesn't have either. Is there any way I can could get those two files so I could load those two linetypes into 2012?
View 3 Replies View Related