I have quite a few drawings in AutoCAD 2009 that have images attached. some of them print just fine and some wont print the image.
I inserted the image by the following: EditPaste SpecialPicture (Metafile) and they are tif files.
I have AutoCAD 2009. When I print a PDF, all the different layers come out looking the same. In other words, in my drawing I have layers that are say green and other layers that are cyan. Supposedly, the green layer is darker and thicker than the cyan layer. But when I print the PDF, all the layers come out with the same thickness and darkness.
But if I plot the DWG file, the lines show up the way they should be. The problem only happens when plotting PDF's.
I have drawn a genealogy chart in Autocad. I would like to overlay it on an image of an old parchment scroll. I have it done in Autocad 2004, but I can’t print it. When I try to print, it only prints the chart drawing and not the scroll underneath.
View 6 Replies View RelatedWe are using autocad map 3d 2012. and autocad 2000. when printing an old drawing made in autocad 2000 with version 2012 the bmp files that we inserted are printing pixelated almost like a digital camo would look. if we go back to 2000 they print fine. we are using a canon ipf710 printer/plotter.
View 7 Replies View RelatedSome times we have to insert a Tiff file into a drawing and sketch over the top of the image. Occasionally when I go to print the file all I get is a blank rectangle where the image should be. Now the image does show in the print preview and it will print out normally sometimes.
View 1 Replies View RelatedSometimes when I import an image (such as a TIFF or pdf) and draw over top of it, when I print the stuff that I've drawn shifts. It will look fine on the screen and in print preview but shifts when printed.
View 2 Replies View Relatedwhere can I get the link to download installation of AutoCAD MAP 3D 2009 X64.
View 4 Replies View RelatedMy client wants to buy Inventor 2013 and want to installed MDT 2009. How to install MDT 2009 of inventor 2013? He has a large data base of MDT. If he can not be installed MTD2009 he will not buy inventor 2013.
View 2 Replies View RelatedA dwg obtained and developed from autocad 2009 was opened with autocad LT 2012 but could not display on the LAYOUT, although it does show on the MODEL.
I have tried to SAVE AS using the 2012 Autocad LT, but the drawing still wont display on the LAYOUT.
My company is useing LDD2009, as well as map. when we make notations in our plans we use a block that is basicly a square with an attribute inside to represent a number, the nuber then corresponds to the same number and a description in a table.
Now, I have been asked to create / recreate (a)the block that would rotate per viewport, also; we are not usin dynamic leaders.
is there a way to either continue with the block or create a dynamic leader that would rotate per viewport, even in other drawings that have xrefs attached like Plan & Profile sheets that are separate drawings.
I'm not sure how autocad would handle the rotating as well as the location of the block and still have the leader point in the same place.
Try starting Autocad LT 2009 and get Error Message: "The application was unable to start correctly (0xc0000005). Click OK to close the application."
It was recommended to uninstall and reinstall the software ... the software will not uninstall ... get the following message:"The following problems were encountered which prevented AutoCAD LT 2009 from updating successfully:? - Error opening installation log file, Verify that the specified log file location exists and that you can writte to it"
Problem: My Autocad 2009 SAVE AS not working properly, when I'm trying to save my work output or anything I want to make SAVE AS it's totally not working...
Is this cause by virus or there something wrong in my software?
How it got in AutoCAD 2009 when a word FIND ZOOM and stay on it rather To ZOOM EXTEND
View 1 Replies View RelatedOur company is planning to buy new workstations Dell Precision T1700 [URL] and we have question about compatibility with Inventor 2009: Will there be issues with drivers or directx etc. that don´t match with Inventor 2009 ?
View 5 Replies View Relatedmy OS is Vista 64bit. i was using ACA2008 SP1 without any problems about a year.i decided to uninstall it and start using ACA2009.i have uninstalled ACA2008, 3dsmax2008 and other autodesk apps and removed some folders 'autodesk' and 'autodesk shared' from vista system folders.i also delete 'autodesk' from registry (LocalMachine/Software & CurrentUser/Software).then i installed ACA2009 64bit without any problems. after install i start it and there wasn't any problems (but i do not use any AEC objects, so i don't know if they was working).next i installed 3dsmax2009 & sp1 for it. max worked OK.then i installed sp1 for ACA2009. instalation was OK... but when i start working on a project i realised that AEC objects (wall,door, etc.) dont work at all ACA2009 starts OK without any warning or something...it loads at startup AECarchBase (and other AEC related stuff) but when you are trying to use any of wall,door,window it does do nothing... for example when you select wall from tools pallete it shows command 'WallAdd' in command line and then wall command ends without any warning or something...it also doesn't work from command line or menu the strange thing is when i uninstall ACA2009 and install ACA2008 again problem was also now in ACA2008 !!!
View 9 Replies View RelatedJust thought I would post this since I didn't see it anywhere else. With Inventor 2009, the views in IDW are automatically set to associative which causes the visibility option for parts/assemblies to be grayed out.
View 3 Replies View RelatedI'm in a situation where I need to share my drawings with another guy in a different office an hour away. I'm using 2010 and he's on 2009. What is the best way for each of us to send drawings back and forth, and still be able to tweak each others work?
View 7 Replies View RelatedMy ctrl key has stopped working in Inventor.
It works fine in other programs.
Also when I hit F7 in a sketch Inventor does not show the section of the part to my sketch plane.
Also, my memory bar indicator does not work, it just stays all grey.
Trying to do some bolt pattern center lines. Been doing them for years and can do them old school way. But was wondering if there is a better ways. If you put a circle from the center of the bolt circle to the center of the bolts and change it to center the hashes never line up. So I always do small center line sections on each bolt hole. Then array it around to cover the entire bolt circle. But that gets time consuming. I am now doing a lot of projects with bolt circles and wondered if there was a better method.
View 0 Replies View RelatedRunning Inventor pro 2009 building simple fabrications and assemblies and it randomly shuts down without warning or any error code. This is happening regularly an dwith no apparent pattern or trigger.
View 1 Replies View RelatedI'm using autocad 2009 I Wrote the word multiplex auditorium using the mtext command.. but when i pressed enter, it got lost somewhere. using the find command [available in the edit menu] i can see it but cannot select it when i close the find dialogue. how can i search for this "multiplex auditorium" word and change its size using the mtext command..?
View 1 Replies View RelatedMy laptop crashed with 2005 but I still have the disks with my drawings stored in them. The 2005 is so old it won't load onto Win7 in my new laptop. But I do have a friend who has 2009. Can I still access my drawings.
View 9 Replies View RelatedI have been trying to plot an excel spreadsheet within LT2009. See attached files.
Test Adobe.pdf was created using "Adobe PDF" driver, paper size A3. Looks good except for the exta lines running through columns 1 and 9.
Test Dwg to.pdf was created using "dwg to PDF.pc3" driver, paper size ISO A3 (420x297mm). The excel portion looks good but it has cut off the border all around.
Border size is 410mm x 287mm.
Using Acrobat 9 Pro and MS Office 2010.
I'm having a problem with a model that is extremely complex. It contains a perforated grille. I've reduced viewres to 100 and turned off those layers along with freezing them and it I still can't adjust my view, perspective or visual style without it locking up. Is there any way to get the model to function? Would making the grille a block or xref work?
View 9 Replies View RelatedI'm having some trouble in AutoCAD LT 2009 with block files.
I need the blocks I create to be available to every drawing I create, but somehow, I'm doing something wrong because I can only access them from the drawing I created them in.
I just recently had to install 2009 from map 2008. When I open drawings last worked on and saved in 2008 and open them in civil 3d 2009, I get drawings that freeze up upon opening. Some will eventually open, showing errors. Others will never open and just freeze up.
View 2 Replies View RelatedI am using two different types of raster ECW and MrSid. ECW file resolution goes way down when plotting. They look like blocks. MrSid files look fuzzy but alot better than ECWs. I've tried RASTERTHRESHOLD, and RASTERPERCENT. Both are set to 90. Using HP6100ps.
Images are fine when using Imageinsert.
Is there a setting i'm missing somewhere for them?
I have a problem with a drawing where I'm working with a certain number of blocks.
The other day Autocad crashed repetedlty when entering the block editor. I double-click on the block, the block definition dialogue box opens and the program freezes - I get the error message "Autocad LT has stopped running..."
I tried reopening the drawing, exploded the block and recreated it - problem solved.
Now this is happening again, except when try to explode and recreate the block using the BLOCK command, when the block definition dialogue box open - the program also freezes.
This only happens when I try to edit one particular block in the drawing.
What is the risk Migrating Inventor 2009 files to Inventor 2012?
Do i have to migrate the Inventor 2009 files to 2010 and up to 2012?
Using Inventor 2009. For some reason (all of a sudden) it will not open a step file. When I go to search for the file I would always use the file drop down an there would be a lengthy list of options. For some reason now it will only list the basic native formats... part, assembly etc. How I can get these back?
View 8 Replies View RelatedMy 2009 Autocad Lt system is crashing on a regular basis with the following:
Fatal Error: Unhandled access violation writing 0x2FS0e798 exception at 77982FC6H.