AutoCad :: 2009 - Bolt Pattern Dimensions
Dec 10, 2013
Trying to do some bolt pattern center lines. Been doing them for years and can do them old school way. But was wondering if there is a better ways. If you put a circle from the center of the bolt circle to the center of the bolts and change it to center the hashes never line up. So I always do small center line sections on each bolt hole. Then array it around to cover the entire bolt circle. But that gets time consuming. I am now doing a lot of projects with bolt circles and wondered if there was a better method.
View 0 Replies
ADVERTISEMENT
Jan 9, 2012
I can not use rectangular pattern for bolt in an assembly.
View 7 Replies
View Related
Sep 17, 2009
I created a sheet metal part with multi-edge flanges; the part unfolded no problem. Now, I need an exact, mirrored copy of that part [new part number]. My first attempt was a mirrored component at the assembly level. The part was mirrored but it would not unfold. My next attempt was a derived part with the mirrored option selected. This part, too, was mirrored but would not unfold either.
"In sheet metal parts, mirroring flanges or contour flanges created using multi-edge select is not supported." Is this why the flat pattern fails?
Is there a workaround? I'd hate to create the mirrored part from scratch when I all need is reverse bends.
View 9 Replies
View Related
Aug 7, 2012
I have some problems with Bolt Connection Component Generator. For placement I choose Concentric, i choose all references, but I can't select Diameter. It is stuck to 10mm and i can't change it.
I am using Inventor Profesional 2013
View 1 Replies
View Related
Aug 23, 2012
After I create bolt connection by select the "termination" and all the fasteners, the length of bolt is fixed. How can I change the length of bolt?
View 1 Replies
View Related
Oct 4, 2011
Is there a feature on the latest series of inventor whereby you can automatically generate fold detail on the flat pattern , ie. fold up 45 degrees, eliminating mistakes. I am currently on Inventor 2008 so this feature could be on a new version.
View 1 Replies
View Related
Sep 19, 2012
I would like to generate a rectangular pattern of extruded tubes which have an internal radius that is proportional to the distance to the centre point of the pattern. Or in other words tubes which are narrower in the centre, and wider at the exterior. Is there a way to do this without resorting to creating each tube individually?
More generally, is there a way to parameterise a feature dimension/parameter so that it is a function of spatial position?
View 8 Replies
View Related
Nov 6, 2012
How to change the dimensions of the chosen pattern,
In the screenshot below, I wanted the block pattern to be 0.26x0.5 instead of 0.225x0.450. Is that possible?
I tried to see if the dimensions can be edited but sounds no opting to do this sort of work.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 2 Replies
View Related
Jul 8, 2012
How to add a Thread to both the Nut & Bolt....i always use the Thread Tool but i would like to also know how to add an actual thread.
View 2 Replies
View Related
Aug 27, 2013
trying to draw a hex nut in isometric...I've got the ellipse with the inside/outside dimensions but as far as placing the lines and connecting them to make the hexagon perimeter I keep coming up wrong..
View 3 Replies
View Related
Mar 21, 2012
I'm trying to make a dynamic bolt that has a nut on it that can move back and forth but is constrained to the max distance set by the bolt length. I want one line type between the head of the bolt and a different line type between the end of the bolt and the nut.
Currently if I take my nut past the end of the bolt, the lines are all messed up?I'm new to dynamic blocks but liking them.
View 9 Replies
View Related
Oct 5, 2013
How to use dynamic simulation, i am creating a bench vise and woud like to animate it going in and out how would i do that?
View 1 Replies
View Related
Jul 19, 2012
I've assembled a bolt and a slide block that is constrained to a base plate and am able to put everything in motion. I have the slide block constrained to slide the distance of the base plate and when I reach the end the bolt continues to rotate when, if this was a real part, should stop. How can I get this bolt to stop once the slide block reaches its ending constraint?
View 2 Replies
View Related
Dec 10, 2012
I'm working on a project in wikiHelp under Inventor tutorials, Content Center, Create iMates. When I pull the object up in an assembly I can create an iMate and it will show that I made one. But when i go to the next page (Place Content Manually Using iMates), I can't get the bolt to snap to the iMate inside the object, the bolt just stays in one position the whole time.
View 2 Replies
View Related
Dec 19, 2011
Current version INV 2012
1. When placing pumps,bolt-on walkways etc..etc..on to a metal frame at the assembly level do you place the pumps/walkways first and then add the bolt holes to the frame or do you create the bolt holes first in the frame and then place the pump/walkways on to the holes?
View 3 Replies
View Related
Mar 2, 2012
how to determine the mass properties of bolt.
View 4 Replies
View Related
Nov 19, 2013
I am trying to draw a "u bolt" in an isometric drawing. I found one solution, that served the purpose of giving the customer the general idea of the stands we are trying to sell them, but I'd like to know if there is a way to draw it properly.
I have attached a pdf to show what I came up with. Pipe Stands.pdf The only way I could think to get it to work (look right) in isometric view was to draw to vertical lines, make an arc across them with the elipseisocircle, and then use the path array to fill the U shape with the isocircles. This keeps the tubular shape, and the number of circles resembles bolt threads.
My problem is that the u-bolt is only threaded on the ends, the arched part should be smooth. Since this u bolt is to clamp fiberglass pipe to the stand, those threads (in my drawing) could cause damage. In this instance, I just explained this in the email to the customer, but I'd like to find a way to draw it proper.
View 9 Replies
View Related
Mar 17, 2013
I am using Autocad 2012 I have got a solid model with a lot of nuts and bolts, is it possible to get the nut to screw up the bolt (so it looks like it is moving up that bolt) also other parts also move it would be nice to make them look like they are moving to.
View 7 Replies
View Related
Oct 19, 2013
I want to insert from content center a screw and modify it, prolong it's thread and more.How can i do that?
In a part file i cannot insert parts from content center, should i make an assembly? and then?
View 3 Replies
View Related
Mar 27, 2007
When inserting a bolt connection requiring a coutersink or counter bore, the bolt is not placed flush and is left standing.
View 8 Replies
View Related
Oct 31, 2012
Using bolted connection, I want to place a bolt through 3 sheets of metal. The first 2 sheets i want it to automatically place a slightly larger hole (which it does) but I want the 3rd sheet to be threaded so the bolt thread and hole thread are the same size.
View 3 Replies
View Related
Apr 11, 2013
When a bolted connection is used, the bolt changes in length as the stackup of hardware increases and decreases. I have noticed that if I do not grab the red arrow to adjust the length, the amount the bolt extends past the nut
seems to be only about 2 threads. What is the formula Inventor uses to determine this extended length?
View 9 Replies
View Related
Oct 16, 2013
I'm trying to constrain a length of ACME threaded rod to a nut so that when the rod is spun or threaded it shows it traveling into the nut as it will be grounded. I would like it to work as a driven assembly or if I was to turn or spin the rod by the mouse. I've reseached this for the last 2 days and can not spend any more time on it so time to ask the experts.
View 4 Replies
View Related
Feb 18, 2011
I've been working with Inventor 2011 - Pro and have not had any success with utilizing a bolted connection (blind hole) in an FEA stress analysis. I have reviewed and one suggestion involved a using a bolt placed "as custom" instead of "as standard". It appears however that there is a default setting that I currently have which doesn't allow this as a selection.
View 4 Replies
View Related
Aug 29, 2012
I starting out new to Inventor 2013.What are the steps to place a washer and bolt from Content Centre into the assembly?
View 5 Replies
View Related
Dec 4, 2012
I have a ratchet plate idw that I've drawn and dimensioned, but I would like to insert two bolt circles to the two diameter dimensions that appear to be pointing at nothing. The circular pattern is not made up of circles so I haven't been able to use the Centered Pattern command in the centerline section. I'm using Inventor 2013.
View 3 Replies
View Related
Feb 22, 2013
is there a way to Replace the "bolt" Component Occurrence with api?
View 2 Replies
View Related
Dec 4, 2012
I was adding a lot of aligned dimensions to a drawing and some where along the way they changed from aligned dimensions to rotated dimensions, even in the same string of dimensions.
View 9 Replies
View Related
Mar 16, 2012
I typically as much as possible like to insert my dimensions into my drawing from my model.
I created holes in the model as a 1/4" tapped hole
Yet when I show the dimensions in the drawing they show the minor dimension.
How do I get the 1/4" to show? I have selected the feature and still get these results.
View 8 Replies
View Related
Sep 17, 2013
Is there any way I can make exploded dimensions in an old drawing become live dimensions again.
View 3 Replies
View Related
May 9, 2013
My Stress analysis will run and process after i hit simulate but did not return result(Results tree is empty)
I'm running autodesk inventor pro 2013.
View 8 Replies
View Related
