AutoCAD Inventor :: Operation Drawings - How To Do
Feb 22, 2012
I want to draw operation drawings, I think, ı must do this like that; I must draw one ipt, and later I must draw drawings from this ipt, and idw's
1.drawing (operation); rectangular prism,
2.drawing (operation); rectangular prism and rectangular cutting,
3.drawing (operation); rectangular prism, rectangular cutting and hole,
4.drawing (operation); rectangular prism, rectangular cutting, hole and hexagon cutting,
when I change dimensions of rectangular prism, all four operation drawings must change, so I can't change location of end of part in idw's browser, but I can change location of end of part in ipt's browser, I want to change location of end of part in idw's browser, can I do this? or alternative solution...
I don't want to make, four ipt for each operations... I added a picture...
Autodesk inventor Design Suite Premium 2012
Windows 7 x64, 750 GB harddisk
Intel core i5 Cpu @3.2 GHz, 8 GB Ram,
nVidia Quadro 2000 D Graphics Card
View 9 Replies
ADVERTISEMENT
Mar 17, 2012
I have an assembly with a half hour or so of unsaved work into it.
I downloaded an IGES model and initiated a Stitch Surfaces command.
15 minutes later . . . here I sit.
AUTODESK: add Escape to Cancel current operation!
View 6 Replies
View Related
Dec 16, 2013
I keep getting this message when opening an assembly;
Internal error in persistence operation (Can't load segment PmResultSegment via a RSeRef when loading segment PmDCSegment)
The solution is to find the corrupted part and restore it.
My problem is that the assembly (and 5 subassemblies) consists of over 150 parts, which is way to many to just start recreating parts at random...
Is there a way to pin-point which parts ruins my model ?
View 1 Replies
View Related
Mar 31, 2011
I am not able to open the tutorial files in the getting started tab. I get a script error "could not complete the operation due to error 800a01ad" for both the tutorials and the help files. I have Windows 7 64 bit SP1, IE 9. I am not getting script errors with any other web sites.
View 4 Replies
View Related
Mar 9, 2012
In regards to sweeping, what does the title of the post mean (self intersecting paths or loops are invalid for this operation). I have a 3D sketch consisting of 1 straight line, one spline with 4 points dictated by 'points' and an arc. All have tangential constrains to each other and I am looking to sweep a circle along this path to create a bent wire. I don't have anypictures or files as it is a stand alone computer at the moment.
View 2 Replies
View Related
Jan 19, 2012
I am using Cable and Harness (Autodesk Inventor 2012 64 bit on Win7 64bit) and when trying to create the segment I only get the error message "The sweep operation failed for the harness segment Segment1 Adjust the segment geometry and try again". It does not matter what data for diameter and bend radius I am using under "Harness properties", it never works. When checking the "Bend radius" for violation it says nothing. I am attaching the files.
View 2 Replies
View Related
Apr 18, 2012
I'm trying to create a model of a Golf club head. I need it to be hollow but I am unable to do this using the shell operation or by creating a surface and thickening the faces. I created the geometry by lofting a series of sketches. I think the nature of the geometry may be causing the problem.
View 1 Replies
View Related
Jul 31, 2013
I am having trouble shelling a part I have designed. Every time I try, with no matter what thickness, I get the following message:
"The attempted shell operation had non-manifold inputs. Try with manifold inputs."
View 2 Replies
View Related
Sep 9, 2013
After a slice operation i have to make a sketch and complete lines.
For example, if i slice in the middle of a threaded hole, in the slice i don't see the thread lines, i just see as if there was a hole.
View 1 Replies
View Related
Nov 19, 2011
I have inventor 2012 and I´m having trouble doing a cut boolean operation to two solids. One is a revolved elipse, so it´s a kind of egg, and the other one is an extruded rectangle.
I want to cut the egg in the rectangular solid, so I can obtain a rectangular solid with an empty egg space inside. I tried to use the "derived" command, so I derived the egg from the rectangular solid, and used the combine command, but with no success. Right now I have two separated solids on the same file (the egg and the extruded rectangle).
View 6 Replies
View Related
Dec 13, 2013
I am having an issue with saving our own dwg file in inventor 2014 & 2014.
When I open a new one of our dwg template files and try to say I get an error that says
"the current operation requires data from document 'xxx' but it cannot be found"
This doesnt happen when trying to save an inventor dwg template file and it has only happened since releases 2013 & 2014. If I open one of our files that was created before release 2013 I can save these with no problem.
I was hoping the issue would resolve itself when upgrading to 2014, but It hasnt, so it must be in a setting that I migrated across.
We have other users using 2013 and are not experiencing the same problem. In fact if they save one of our template files on their machine I am then able to open and save it on my machine!
View 9 Replies
View Related
Nov 17, 2013
how can i make a thread feature in machining environment after welding operation?
View 1 Replies
View Related
Sep 4, 2012
I opened Inventor 2013 this morning to find this issue. Everything starts fine, I am able to open/create a part file and enter sketch mode, but as soon as I click a draw operation (spline, line, rectangle, etc.) it freezes on me. I have been using 2013 for a couple months now without issue, and cannot associate this with a change of anything on my computer.I have tried:
1) Restarting computer
2) Reducing graphics display quality to Rough
3) Checking "Software Graphics"
4) Calibrate my 3Dconnexion mouse
5) The diagnostic check for graphics card (approved)
View 9 Replies
View Related
Dec 27, 2013
I'm trying to extrude a logo through a shape I have already created, however, "the attempted operation did not produce meaningful intersection edges from the face-face intersection. Try with different outputs."
I'm using Autodesk Inventor 2014.
View 2 Replies
View Related
Sep 26, 2012
Whenever I try and extrude or emboss my buisness Logo I get the error "The attempted operation did not produce a meaningful result"
I have attached file.
View 3 Replies
View Related
Sep 5, 2012
I have a part that we will cut out on a CNC plasma machine that will undergo a drilling operation. We create all the parts that will be cut on the plasma in the sheet metal environment because of the simple flat pattern export. Our plasma machine has the ability to scribe lines and also create center punch marks. It distinguishes between cut lines, scribe lines, and center punch marks by layer name. I need a way to get the center points of the drill locations into their own layer.
View 9 Replies
View Related
Oct 2, 2012
I'm experiencing many problems when modifying parts measures, adding extruxions or doing holes/threads.
Always same error: Operation doesn't produce a significant result. Redefine inputs
If Inventor is totally closed and reopened, I can modify and update parts without problems for 10-30 minutes, until first error, then it gives errors until closing again. Usually, but not always, operation preview begins to fail before first error. So it's quite difficult to reproduce.
I've tried uninstalling everything after Autodesk installation, windows updates and Firefox plugins (well, even Firefox itself) included. I've tried all hotfixes and updates that Inventor 2013 gives (NO SP1), even I've fully reinstalled Inventor. I've been using Inventor from Inventor 7 and never seen such errors.
I've attached a part from the pictures. Anyway, as errors are not always happening, maybe you won't have any problem with it.
PD: Also, a little problem is that with this Inventor version I can use the CTR+c CTRL+v to copy parts into an assembly. I can use the context menu but no shortkeys.
Autodesk Product Design Suite Premium 2013 (Installed yesterday, so with all official updates)
Windows 7 64bits Proffesional SP1
Intel(R) Xeon CPU W3565 @3.20GHz
NVIDIA Quadro FX 3800
8GB RAM
View 6 Replies
View Related
Dec 28, 2012
I'm using ACAD LT 2008.
When i try to copy paste some drawing entities from a heavy drawing file to any other file, the program blocks and says 'not responding', endlessly. So i always have to shutdown the program. I experience the same problem using the designcenter: when I try to copy a layout into another drawing, my computer gets stuck.
Another annoying problem with these files is that they are so heavy, while in fact they shouldn't be. I tried the aectoacad file command. In result the file id half as big, but after I open it and save it, again is the original size.
View 5 Replies
View Related
Oct 17, 2011
While making a drawing and there is something which I want to turn visibilty of for a while, I will select from a sub-menu "Visibility" (see the attachment) But what I must do if I want to turn the visibility on again for example to that hole shown in screen shot?
View 2 Replies
View Related
Jun 5, 2013
know if we could put for example the Building of our Assembly in some 2D drawings as a "Reference" object and as a non reference object in other 2D drawings?
In some 2D drawings we don't need the whole building, and just with the references is enough, but in some other views, we need to see the building so we can represent the real obstacles we have or to show how the custumer should do the pipe implantation
View 5 Replies
View Related
Dec 19, 2011
I am slowly learning about ilogic, and have created parts and assemblies that are run by rules. My next question is, what exactly can ilogic do for drawings? I've looked at the wikihelp, but I am not a natural at programming and I need more than a list of functions with brief descriptions to get me started.
I'm looking for code snippets, other discussions, tips, tricks, and/or tutorials to get info what I can do with ilogic and the API that can automate parts of the drawing process.
View 2 Replies
View Related
Oct 2, 2012
The solutions that I have found to get an assembly bom on an assembly drawing are:
1. insert an assembly into an assembly.
2. make a virtual part or derived part.
3. make extra fields in the part and have the BOM column look at alternative iproperty fields.
In a part file that has a family table I want the configurations of some casted parts and some machined parts. the casted parts will have a drawing but no BOM, the machined parts will have a drawing and a BOM.
Then in an assembly file that has a family table I want configurations that use the configurations of the part file. Each of these assemblies will have a drawing that has a BOM that will call out the part that is is made from.
In other words I will have a casting that will be machined so I will need a casting drawing and a machine drawing that has a BOM telling what casting to use.
On top of that when I try to make a family table in an assembly I get a message "THE BILL OF MATERIALS CONTAINS VIEWS OR PROPERTIES NOT SUPPORTED BE CONFIGURATIONS. OONLY STRUCTURED FIRST LEVEL BOM VIEWS ARE SUPPORTED. THE BOM WILL BE CHANGED DURING CONVERSION".
View 1 Replies
View Related
Sep 28, 2012
With iAssemblies is it possible to somehow also generate a dwg from it as well? Or would you have to use copy design?
So... depending on the configuration, I would need a main assembly drawing, and a few detail dwgs.
View 4 Replies
View Related
Sep 29, 2012
I thought when you created a part and filled out the iproperties description field and created a drawing of that part that the parts list would read the iproperties description field and put that in the parts list description field.
Then when you create an assembly that included that part and filled out the iproperties description field in the assembly and created a drawing of that assembly that the parts list description field would be filled out be the assembly iproperties description field.
Instead the description field of the parts list in the assembly drawing is filled out using the iproperties description field of the part not the assembly.
View 4 Replies
View Related
Apr 2, 2013
Every now and then I go back and try to use publish to speed up printing but I always go back to plotting one by one.
I work in a housing construction office and I have 10 separate drawings side by side in model space for house plans that I need plot separate to give to certain people. My problem isn't that I can't publish them separately its that I can't save them over existing pdf's individually predetermined.
Q1. do i just have to go through and change every layout name before or after i publish?
Q2. how do i change the output publish location?
Q3. can each layout be saved to a different existing pdf and remember it?
Q3. can i save these setting across to a new drawing?
View 5 Replies
View Related
Oct 1, 2008
I have an assembly that is a general model with different modules that all are iAssemblies.
With this model I can speed up the design process at the company I am working for.
In the model I only choose the correct member for the iAssemblies and the assembly updates correctly and just with a couple of clicks I have made a configuration of all the modules.
Now, I would like to take it a step further and have the drawing, for the specific configuration, generated automatically.
In the drawing I would like to have the master assembly presented in sheet 1 and the modules presented separately in different sheets, all sheets with BOM lists.
Is this possible to do?
(Next step is to export all the BOM lists to an excel document that can be sent to the product co-ordinator to build up the database system)
View 4 Replies
View Related
Oct 22, 2013
I have done a new Title Block in our drawing templates.
It only works in New drawings if I open an old drawing I must "Copy/paste" the new Title Block into the browser to the left But I want all our old drawings to use the new Title Block.
Is there a way to have the new Title as default on all old drawings?
View 3 Replies
View Related
Aug 5, 2013
What's the best way to ensure that all the drawings for my project are updated if I make changes to the Style settings on one of them? I've been putting every sheet into a single drawing file, but now I'm up to about 50 sheets and it takes about 40 seconds for each save, even if I only made a single minor change since the last save. I don't have any iLogic that could be causing this.
So I'd like to split the sheets up into multiple.dwgs, but I want changes I make my Styles to be reflected in all drawings. Can I create an "external" stye file that all drawings pull their style from? Or will I have to export/import to each drawing every time I make a change?
View 3 Replies
View Related
Dec 30, 2011
In Solidworks they had something called custom properties that were generally setup in the models where you had the property names and then values would be filled in to automatically populate drawing titleblocks. I found this, but I can't get the drawing description to keep changes and update the drawing.
View 9 Replies
View Related
May 11, 2012
How possible it is to print drawings using a VBA script. I'm interested in forcing print size and the best fit setting.
Searching for printing/plotting yields more results about saving to dwg/pdf than printing to paper.
View 5 Replies
View Related
Oct 3, 2011
I am having some issues concerning updating drawings. When a part (.IPT) is placed in a drawing, everything is fine (ie. the views represented in the drawing are up-to-date). Yet, when I make a change to the part (something as small as a dimensional change) it does not translate through to the drawing. This is also the case for iProperties.
I have been playing around for a while now, but have had no luck. The part is also an iPart, but this shouldn't matter.
View 9 Replies
View Related
