I'm trying to extrude a logo through a shape I have already created, however, "the attempted operation did not produce meaningful intersection edges from the face-face intersection. Try with different outputs."
I'm using Autodesk Inventor 2014.
Whenever I try and extrude or emboss my buisness Logo I get the error "The attempted operation did not produce a meaningful result"
I have attached file.
I can't extrude this piece. I know i have loops but i don't know where and how to fix them!
View 1 Replies View RelatedSometimes after I have created a sketch I can not extrude it, sometimes it wont let me click on the profile, other times it will only let me cut away material not add it like I would like. I am sure it has something to do with something fundamental I am doing wrong within the sketch, but I am not sure what.
View 9 Replies View RelatedI made a sketch. In order to make a hole in the middle of the "triangle", I had to create a tangent circle based on the triangle edges. And then make a new circle (to be the hole I need) and constrain it to the first tangent circle.
This way, if I change the size of the triangle, the hole I need (the inner one) will always stay in the middle of the triangle.
Anyway, when I try to extrude the different profiles of my sketch, something strange happens. As soon as I select the middle circle (not the inner one), 2 of the side outbreak's lose their extrusion.
Second question I have is why did my sketch (except for 2 blue lines) turn from blue to green after fixing loop problems?
(Screenshot’s and sketch file are included.)
See attached image file. I can't select just the profile sketch to cut extrude. It only selects the whole face (surface). I have this issue on (2) different workstations and on various parts along the way.
View 2 Replies View Relatedwhy I am not able to extrude the close sketch through the part.
View 1 Replies View RelatedI am using inventor 2011 to make an assembly, and No matter wether I sketch off a face or a plane, I cannot get get my sketches to extrude, inventor wants to make cuts when there is nothing to cut. Not sure what I am doing wrong, becasue when I try doing the same thing on a new part it works just fine.
View 3 Replies View RelatedI am trying to create a 150m buffer around points from a map features that I have attached from an SDF.
If I select any amount of points to buffer I get the following error:Unable to complete buffer operation
Using Civil 3D 2011 (come with Map 3D of course) 64 bit on a window 64 bit machine. Tried attaching sqlite db with no luck, then exported to SDF attached to dwg as datasource, themed, etc... tried feature buffer analysis again... same error.
I design flags for people and have worked with Illustrator for just over a year. Most logo's I've worked are 2D and I've never had any issues that I could overcome ( I learn as I go along) however I have been given a logo which has the Extrude & Bevel effect on (which I haven't worked with before) (see first image). I have to make this logo much bigger but when i do it stretches and reshapes the logo. (see 2nd image).
The scale stroke & effect box, is checked. I am working in CS6. So how do I resize this logo proportionately?
I have run across a situation that I have not been able to find having been previously asked. I have attached the file of what I am working on.
I have 2 dimensions to the implied intersection, but how do I put the dimension when there are 2 implied intersections? Such as along the bottom of the part.
I am getting the error message 'Path curve is coplanar with or tangent to the plane of the profile curve.Unable to extrude the selected object.'
when I try an extrude this shape around this rectangular shape below.
extrude.gif
extrude2.gif
I am trying to produce an iFeature that can be used as a punch/slot within a sheet metal component.
I have had minor success creating basic dimples before (simple revolved features), but this time I require a more detailed feature. I haven't been able to produce this part (see attached) as an i Feature. I believe it is because I have used a loft.
What alternatives are there? (I feel if I could get a good grasp on the limits of iFeatures that I could really make my modelling more efficient and versatile).
I am needing to put a horizontal dimension from the implied intersections of a "Z" shape. In the attached screen shot, I have a question mark at the dimension I'm needing.
I have tried the RMB / Intersection in different ways, but none giving me the dimension. How do I go about getting this dimension?
I am not able to extrude closed polyline shapes. I get the following message:
Cannot create solid from open curve.
Cannot sweep or extrude non-planar objects.
Unable to extrude the selected object.
Other folks have opened my drawing – some can extrude, some get the same or similar message. I’ve tried re-building the shapes to extrude. It worked with one thing this morning and now it won’t extrude again.
After installing Photoshop CS6 I am unable to scan from within photoshop. I went to the Epson website and followed the instructions given but still no scanner shows up in the File > Import command. I am also unable to complete the crop and straighten photos command from the File > Automate menu, I get a dialog box that states "A required operation is unavailable." I have used this feature for many years and it has saved me many hours of scanning, I need this to work.
View 1 Replies View RelatedI downloaded LR 4.0 as an upgrade to 3 for my iMac. When I try to install, the error message I receive is Operation could not be completed ([url]... error-1). What's the problem?
View 4 Replies View RelatedIn an .idw environment, I have multiple models displayed.I am trying to create simple text labels for each model using text, modifying each one so that it will display the part number and the revision level by using the "Component" drop down box and assigning the proper "Type" and "Property", then using the "Add Text Parameter" button to place the fields into the text box.
This works as intended for the first model that I created a view for. However, it will not work for each successive model; the text will revert to the part number and revision level of the first model that was brought into the .idw environment, even if I change the target component in the "Component" drop-down box.
In the .jpg that I have attached, you can see that I have 035-14218 selected in the "Component" drop-down. This is the initial model that I brought into the .idw. and the resulting text is correct.
Windows 7 Pro, SP1
Inventor 2012 SP1
I want to draw operation drawings, I think, ı must do this like that; I must draw one ipt, and later I must draw drawings from this ipt, and idw's
1.drawing (operation); rectangular prism,
2.drawing (operation); rectangular prism and rectangular cutting,
3.drawing (operation); rectangular prism, rectangular cutting and hole,
4.drawing (operation); rectangular prism, rectangular cutting, hole and hexagon cutting,
when I change dimensions of rectangular prism, all four operation drawings must change, so I can't change location of end of part in idw's browser, but I can change location of end of part in ipt's browser, I want to change location of end of part in idw's browser, can I do this? or alternative solution...
I don't want to make, four ipt for each operations... I added a picture...
Autodesk inventor Design Suite Premium 2012
Windows 7 x64, 750 GB harddisk
Intel core i5 Cpu @3.2 GHz, 8 GB Ram,
nVidia Quadro 2000 D Graphics Card
I have an assembly with a half hour or so of unsaved work into it.
I downloaded an IGES model and initiated a Stitch Surfaces command.
15 minutes later . . . here I sit.
AUTODESK: add Escape to Cancel current operation!
I keep getting this message when opening an assembly;
Internal error in persistence operation (Can't load segment PmResultSegment via a RSeRef when loading segment PmDCSegment)
The solution is to find the corrupted part and restore it.
My problem is that the assembly (and 5 subassemblies) consists of over 150 parts, which is way to many to just start recreating parts at random...
Is there a way to pin-point which parts ruins my model ?
I am not able to open the tutorial files in the getting started tab. I get a script error "could not complete the operation due to error 800a01ad" for both the tutorials and the help files. I have Windows 7 64 bit SP1, IE 9. I am not getting script errors with any other web sites.
View 4 Replies View RelatedIn regards to sweeping, what does the title of the post mean (self intersecting paths or loops are invalid for this operation). I have a 3D sketch consisting of 1 straight line, one spline with 4 points dictated by 'points' and an arc. All have tangential constrains to each other and I am looking to sweep a circle along this path to create a bent wire. I don't have anypictures or files as it is a stand alone computer at the moment.
View 2 Replies View RelatedI am using Cable and Harness (Autodesk Inventor 2012 64 bit on Win7 64bit) and when trying to create the segment I only get the error message "The sweep operation failed for the harness segment Segment1 Adjust the segment geometry and try again". It does not matter what data for diameter and bend radius I am using under "Harness properties", it never works. When checking the "Bend radius" for violation it says nothing. I am attaching the files.
View 2 Replies View RelatedI'm trying to create a model of a Golf club head. I need it to be hollow but I am unable to do this using the shell operation or by creating a surface and thickening the faces. I created the geometry by lofting a series of sketches. I think the nature of the geometry may be causing the problem.
View 1 Replies View RelatedI am having trouble shelling a part I have designed. Every time I try, with no matter what thickness, I get the following message:
"The attempted shell operation had non-manifold inputs. Try with manifold inputs."
After a slice operation i have to make a sketch and complete lines.
For example, if i slice in the middle of a threaded hole, in the slice i don't see the thread lines, i just see as if there was a hole.
I have inventor 2012 and I´m having trouble doing a cut boolean operation to two solids. One is a revolved elipse, so it´s a kind of egg, and the other one is an extruded rectangle.
I want to cut the egg in the rectangular solid, so I can obtain a rectangular solid with an empty egg space inside. I tried to use the "derived" command, so I derived the egg from the rectangular solid, and used the combine command, but with no success. Right now I have two separated solids on the same file (the egg and the extruded rectangle).
I am having an issue with saving our own dwg file in inventor 2014 & 2014.
When I open a new one of our dwg template files and try to say I get an error that says
"the current operation requires data from document 'xxx' but it cannot be found"
This doesnt happen when trying to save an inventor dwg template file and it has only happened since releases 2013 & 2014. If I open one of our files that was created before release 2013 I can save these with no problem.
I was hoping the issue would resolve itself when upgrading to 2014, but It hasnt, so it must be in a setting that I migrated across.
We have other users using 2013 and are not experiencing the same problem. In fact if they save one of our template files on their machine I am then able to open and save it on my machine!
how can i make a thread feature in machining environment after welding operation?
View 1 Replies View RelatedI opened Inventor 2013 this morning to find this issue. Everything starts fine, I am able to open/create a part file and enter sketch mode, but as soon as I click a draw operation (spline, line, rectangle, etc.) it freezes on me. I have been using 2013 for a couple months now without issue, and cannot associate this with a change of anything on my computer.I have tried:
1) Restarting computer
2) Reducing graphics display quality to Rough
3) Checking "Software Graphics"
4) Calibrate my 3Dconnexion mouse
5) The diagnostic check for graphics card (approved)