AutoCAD Inventor :: Current Operation Requires Data From Document Xxx But It Cannot Be Found
Dec 13, 2013
I am having an issue with saving our own dwg file in inventor 2014 & 2014.
When I open a new one of our dwg template files and try to say I get an error that says
"the current operation requires data from document 'xxx' but it cannot be found"
This doesnt happen when trying to save an inventor dwg template file and it has only happened since releases 2013 & 2014. If I open one of our files that was created before release 2013 I can save these with no problem.
I was hoping the issue would resolve itself when upgrading to 2014, but It hasnt, so it must be in a setting that I migrated across.
We have other users using 2013 and are not experiencing the same problem. In fact if they save one of our template files on their machine I am then able to open and save it on my machine!
View 9 Replies
ADVERTISEMENT
Mar 11, 2013
I´m having som problems to publish a part in to the Content Center. It´s the first time I´m doing this.
The part is made with parameters and is a little bit more complex than a bolt.
The problem is that I got this message: "There are external dependencies found in the document. Please remove the dependencies then proceed with this comand."
View 4 Replies
View Related
Jan 5, 2012
my code is:
Dim AcadDoc As Document = Application.DocumentManager.MdiActiveDocument Dim CurDb As Database = AcadDoc.Database Dim lt As LayerTable = DirectCast(tr.GetObject(CurDb.LayerTableId, OpenMode.ForRead), LayerTable)
if fails on last line with error:-
Operation is not valid due to the current state of the object.
View 6 Replies
View Related
Aug 10, 2012
It works sporadically. The error is "There were no plotable sheets in the current operation." I did a window. Also tried saving the dwg to a previous version. I note in options, that a multi sheet file is chosen, but I only have one sheet. Can not seem to change multi sheet to one sheet. If I open the file in Inventor, I get the same error.
View 2 Replies
View Related
Feb 15, 2011
I want to export a dwg to pdf. It appears to do it, but doesn't. Keep getting
"ERROR: There were no plot table sheets in the current operation."
View 9 Replies
View Related
Aug 29, 2013
I have a simple iPart, with driven parameters Length and Width. When length changes (from a multi-value list), the spacing on a pattern and the number of occurrences of that pattern also change.
Invariably, it requires a rebuild. Occasionally, it requires two rebuilds. As this part is in a second-level subassembly, opening the part, rebuilding it, then rebuilding its assembly, then rebuilding the top-level is consumptive.
I've been using iLogic and iParts for about a week now, so I might be missing something basic. File attached.
Inventor 2013
Win 7 Pro SP1 (x64)
View 7 Replies
View Related
Dec 19, 2013
Strangely, every time I click "save" in CS6 it opens up a 'Save As' window, (which shouldn't happen), then I click save witht the existing file name (it then tells me the doc already exists), I click OK, (and then OK to the next popup window) then get the message that "This file cannot be found". I'm forced to click "ok" and the doument isn't saved. I've tried saving it differently in previous versions and it still doesn't work. I recorded a video of this behavior. You can see it here - [URL]
Why would it be trying to find a file? It seems like an error message when trying to Open a doc, not Save a doc. I can't shutdown my station until I get the document to save.
View 8 Replies
View Related
Jul 12, 2012
i have this drawing which i created data reference to the wrong project in the wrong coordinate system and worked off that. then now i am trying to correct it. so i copied the dtm and did coordinate transformation and got that right. now the model drawing is still linked to the original dtm from the other project folder.
if i remember right back in 2007 version there was a completely built in shortcut editor which allows you to change the path in current drawing. now it's all greyed out. there is no access. so is there a way to bypass this? probably pretty common thing to do. say you want to try different version of the same object to try your design just swap it back and forth.
They should make a right click button on the data shorts in current drawing and says "browse data reference" not show up when only broken reference occurs.
one way i can think off now is copy the files to local. disable network drive, then let it broken reference show up then browse to desktop one then delete desktop one and hopefully it get the broken reference again and not look for the very original one. i think it's probably gonna do that, there is some "hidden" thing stored in the object to point to the original path which not available to users.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
View 2 Replies
View Related
May 10, 2009
Using PS CS3, I wrote a few lines of text, then saved the file in three formats; PSD, JPEG and GIF. If I close PS and click on any one of these files to open it in Photoshop, I get the "No camera data found in this file" message. In fact, if I open just about any graphics file in any format by clicking on it, I get either this message or another one telling me which camera was used to shoot the image, complete with an exclamation mark at the end .
If I open PS first and then open a file, the message does not appear, even if it's a digital camera image. Is the any way to kill this damned thing and have it stay dead? FWIW, I've wiped out preferences several times and sometimes that results in a temporary cure. But a few days later the message is back again. FWIW#2, this problem does not occur in any other CS3 application. Any suggestions?
View 10 Replies
View Related
Feb 8, 2009
when I expand the document window in the client area of the user interface, the window expands completely to cover the whole screen, including the surrounding panels, menus, etc. The only thing shown is the full document window. I'm not sure if this is something that can be configured in the preferences or not. I've tried all the interface settings and nothing works.
View 1 Replies
View Related
Dec 6, 2012
Autocad 2013 Data Extraction works if I do not include attached xrefs and set it to "Select objects in current drawing". When I check "Extract objects from xrefs"; and go to next it processes for a bit then stays on page 2 of 8 on the Define Data Source page. Also have the same error if I choose " Drawings/Sheet set" with or without the xref objects included.
View 3 Replies
View Related
Jun 6, 2013
Photoshop 13.1.1 x64. Mac Pro 3.33 6-core running OSX 10.6.8, 48Gb RAM. Working on a large-ish .PSD file (650 Mb) and saving to a network drive (a Drobo connected to a server) which is our usual routine and has been for years.
Problem – When I save the document and close it, the saved file (in the correct target location) shows the correct modified time and date stamp but if you open that file up again a lot of work is missing. In this instance, about the last half hours work (since the previous time I saved it). However, if you then go to File > Open Recent and choose the file name, the document opens with all the missing up-to-date work in it.
Clearly, File > Open Recent is opening a temporary document somewhere and not the saved file in the target location.
My concern is why isn't the saved file (with correct modified time and date) up-to-date? Suddenly we are having to double check every PS file we work on and save and that is not practical.
View 1 Replies
View Related
Mar 11, 2011
How to make a duplicate copy of current document?
so that i can do the modification with duplicate document without changing the status of original document.
View 2 Replies
View Related
Oct 16, 2012
I'd like to create a script that checks the current document's color profile and checks it against a string, for example "sRGB IEC61966-2.1". My studio has a script that performs various functions to make sure that all the layers are visible/unlocked, checks for stray points, etc., and we'd like to add a check to the color profile because we handle a large number of files and this setting is overlooked a lot.
It's alright if this value isn't writable through script (we can just pop up an alert letting the user know that they need to change it), but I can't find where to actually read this setting! We're currently working on Macs and with JavaScript, but any nudge in the right direction.
View 11 Replies
View Related
Feb 22, 2012
I want to draw operation drawings, I think, ı must do this like that; I must draw one ipt, and later I must draw drawings from this ipt, and idw's
1.drawing (operation); rectangular prism,
2.drawing (operation); rectangular prism and rectangular cutting,
3.drawing (operation); rectangular prism, rectangular cutting and hole,
4.drawing (operation); rectangular prism, rectangular cutting, hole and hexagon cutting,
when I change dimensions of rectangular prism, all four operation drawings must change, so I can't change location of end of part in idw's browser, but I can change location of end of part in ipt's browser, I want to change location of end of part in idw's browser, can I do this? or alternative solution...
I don't want to make, four ipt for each operations... I added a picture...
Autodesk inventor Design Suite Premium 2012
Windows 7 x64, 750 GB harddisk
Intel core i5 Cpu @3.2 GHz, 8 GB Ram,
nVidia Quadro 2000 D Graphics Card
View 9 Replies
View Related
May 17, 2013
I have an excel document with a document header reserving rows 1-12. When i use "extract data" in autocad, i don't want the excel header to disappear. Can i set another cell than A1 to be the starting cell in Excel? Or how do i keep the header in the document?
View 5 Replies
View Related
Mar 17, 2012
I have an assembly with a half hour or so of unsaved work into it.
I downloaded an IGES model and initiated a Stitch Surfaces command.
15 minutes later . . . here I sit.
AUTODESK: add Escape to Cancel current operation!
View 6 Replies
View Related
Feb 11, 2013
I tried to print thisdrawing.modeldocument in a vba sub, but it doesn't work.
View 4 Replies
View Related
Dec 16, 2013
I keep getting this message when opening an assembly;
Internal error in persistence operation (Can't load segment PmResultSegment via a RSeRef when loading segment PmDCSegment)
The solution is to find the corrupted part and restore it.
My problem is that the assembly (and 5 subassemblies) consists of over 150 parts, which is way to many to just start recreating parts at random...
Is there a way to pin-point which parts ruins my model ?
View 1 Replies
View Related
Mar 31, 2011
I am not able to open the tutorial files in the getting started tab. I get a script error "could not complete the operation due to error 800a01ad" for both the tutorials and the help files. I have Windows 7 64 bit SP1, IE 9. I am not getting script errors with any other web sites.
View 4 Replies
View Related
Mar 9, 2012
In regards to sweeping, what does the title of the post mean (self intersecting paths or loops are invalid for this operation). I have a 3D sketch consisting of 1 straight line, one spline with 4 points dictated by 'points' and an arc. All have tangential constrains to each other and I am looking to sweep a circle along this path to create a bent wire. I don't have anypictures or files as it is a stand alone computer at the moment.
View 2 Replies
View Related
Jan 19, 2012
I am using Cable and Harness (Autodesk Inventor 2012 64 bit on Win7 64bit) and when trying to create the segment I only get the error message "The sweep operation failed for the harness segment Segment1 Adjust the segment geometry and try again". It does not matter what data for diameter and bend radius I am using under "Harness properties", it never works. When checking the "Bend radius" for violation it says nothing. I am attaching the files.
View 2 Replies
View Related
Apr 18, 2012
I'm trying to create a model of a Golf club head. I need it to be hollow but I am unable to do this using the shell operation or by creating a surface and thickening the faces. I created the geometry by lofting a series of sketches. I think the nature of the geometry may be causing the problem.
View 1 Replies
View Related
Jul 31, 2013
I am having trouble shelling a part I have designed. Every time I try, with no matter what thickness, I get the following message:
"The attempted shell operation had non-manifold inputs. Try with manifold inputs."
View 2 Replies
View Related
Sep 9, 2013
After a slice operation i have to make a sketch and complete lines.
For example, if i slice in the middle of a threaded hole, in the slice i don't see the thread lines, i just see as if there was a hole.
View 1 Replies
View Related
Jun 15, 2012
Can't seem to locate the Inventor Material Library....under Default in Projects, the Inventor Material Library is highlighted in Red. Where I need to browse to inorder to locate it?
View 2 Replies
View Related
Nov 19, 2011
I have inventor 2012 and I´m having trouble doing a cut boolean operation to two solids. One is a revolved elipse, so it´s a kind of egg, and the other one is an extruded rectangle.
I want to cut the egg in the rectangular solid, so I can obtain a rectangular solid with an empty egg space inside. I tried to use the "derived" command, so I derived the egg from the rectangular solid, and used the combine command, but with no success. Right now I have two separated solids on the same file (the egg and the extruded rectangle).
View 6 Replies
View Related
Nov 17, 2013
how can i make a thread feature in machining environment after welding operation?
View 1 Replies
View Related
Sep 4, 2012
I opened Inventor 2013 this morning to find this issue. Everything starts fine, I am able to open/create a part file and enter sketch mode, but as soon as I click a draw operation (spline, line, rectangle, etc.) it freezes on me. I have been using 2013 for a couple months now without issue, and cannot associate this with a change of anything on my computer.I have tried:
1) Restarting computer
2) Reducing graphics display quality to Rough
3) Checking "Software Graphics"
4) Calibrate my 3Dconnexion mouse
5) The diagnostic check for graphics card (approved)
View 9 Replies
View Related
Dec 27, 2013
I'm trying to extrude a logo through a shape I have already created, however, "the attempted operation did not produce meaningful intersection edges from the face-face intersection. Try with different outputs."
I'm using Autodesk Inventor 2014.
View 2 Replies
View Related
Sep 26, 2012
Whenever I try and extrude or emboss my buisness Logo I get the error "The attempted operation did not produce a meaningful result"
I have attached file.
View 3 Replies
View Related
