It works sporadically. The error is "There were no plotable sheets in the current operation." I did a window. Also tried saving the dwg to a previous version. I note in options, that a multi sheet file is chosen, but I only have one sheet. Can not seem to change multi sheet to one sheet. If I open the file in Inventor, I get the same error.
View 2 RepliesI want to export a dwg to pdf. It appears to do it, but doesn't. Keep getting
"ERROR: There were no plot table sheets in the current operation."
my code is:
Dim AcadDoc As Document = Application.DocumentManager.MdiActiveDocument Dim CurDb As Database = AcadDoc.Database Dim lt As LayerTable = DirectCast(tr.GetObject(CurDb.LayerTableId, OpenMode.ForRead), LayerTable)
if fails on last line with error:-
Operation is not valid due to the current state of the object.
I am having an issue with saving our own dwg file in inventor 2014 & 2014.
When I open a new one of our dwg template files and try to say I get an error that says
"the current operation requires data from document 'xxx' but it cannot be found"
This doesnt happen when trying to save an inventor dwg template file and it has only happened since releases 2013 & 2014. If I open one of our files that was created before release 2013 I can save these with no problem.
I was hoping the issue would resolve itself when upgrading to 2014, but It hasnt, so it must be in a setting that I migrated across.
We have other users using 2013 and are not experiencing the same problem. In fact if they save one of our template files on their machine I am then able to open and save it on my machine!
When we publish we are always asked if we wish to save the current list of sheets.
See attached screenshot.
One of my users no longer gets this option.
Every time he publishes the program goes directly to the Save List As dialog box so he can name/save a .DSD file. He no longer gets the option of a box asking him if he wants to save the current list of sheets.
My guess is some variable got changed that has removed the option of being prompted about saving the .DSD file.
P.S. We're using AutoCAD 2012.
No problems so far when I check the "Export views on sheets and links as external references" but when I do not check that box some dimension strings move ridiculously far away from the location as seen in Revit. This project is huge and we do not want XREFs for every single sheet (DWG file). Each view on the sheet is exported as a DWG block. I could modify each view with this problem, but it beats the point of exporting. Attached is a sample file.
View 1 Replies View RelatedI'm using 2008 and trying to get one side of my plots to be 1/2" from the edge of the paper (from one of the ends, not the sides). When plotting from R14, our plotter understands just fine and prints a standard ARCH D sheet just the way we want it. With 2008, our standard sheet template sits outside the dashed line that indicates plottable area.
I think that autoCAD thinks that the printer can't print that close to the edge, but obviously it can. I've gone into the 'modify paper sizes' options and adjusted the bottom margin to allow enough space for the plot. Plot preview looks fine and nothing is getting cut off, but when I actually print, the printer just prints an extra inch of paper past the margin I redefined so I end up with a sheet that is 24 x 37 and the edge of the plot is still not 1/2" from the edge of the paper like I need it to be.
We are trying to move from R14 to 2008 (and eventually 2014) as the office standard and this is the last hurdle that is baffling us.
I am trying to export part of a structural model to IFC but Revit is exporting the complete model. My file is from a consultant and is created in Revit Structure 2011, I am opening it with Revit 2012. The model contains ‘new’ and ‘existing’ phases which appear to be set up correctly.
I have tried a couple of different methods set up a 3D view and defined it by phase 'new only' so the existing is hidden, and tried to export with the “current view only” checked and uncheckedset up a 3D view and defined it by workset using visibility graphics, and again with the “current view only” checked and uncheckedEach time when I open the Model in Navisworks or Solibri everything is visible.Have tried this in both Struct and Arch with the same result, but I do not have the same issue if I open and export from Revit 2011 (arch) ?
I opened Inventor 2013 this morning to find this issue. Everything starts fine, I am able to open/create a part file and enter sketch mode, but as soon as I click a draw operation (spline, line, rectangle, etc.) it freezes on me. I have been using 2013 for a couple months now without issue, and cannot associate this with a change of anything on my computer.I have tried:
1) Restarting computer
2) Reducing graphics display quality to Rough
3) Checking "Software Graphics"
4) Calibrate my 3Dconnexion mouse
5) The diagnostic check for graphics card (approved)
I am frustrated at the design of sheetsets. There is no way to "lock" sheets to a particular sheet set.
When I have a sheet open with a sheet set verything is great but, if I close that sheet and open another w/o closing the sheet set, the new dwg will associate all of its fields with the other sheet set. Is there a way to lock the sheets with a sheet set? OR is there a way to automatically close a sheetset that is associated with a a file or files when they are closed?
shouldn't sheets marked as "exclude from count" not be counted?
I tried this in both 2013 and 2012 to see if maybe AutoDesk broke it, but it doesn't work in either one. This is easily reproducible for me, a file shouldn't be necessary. Just open up (or create) a multi sheet drawing. Go to edit sheet on one or two of them and check the "exclude form count" box. Now create a new iLogic rule and put the following line into it:
MsgBox("This is the number of sheets in the drawing: " & ThisDoc.Document.Sheets.Count, VBOkOnly, "Number of Sheets")
I exported a .arg file in the menu :'Options>Profiles' and I imported the '.arg' file back after I reinstalled the Autocad 2013. Then I selected the profile which I imported , and clicked the button 'SET CURRENT'
BUT It didn't work after I reopen the ACAD 2013. The current profile isn't the imported one still. I have tried again and again. How to 'set current' the profile I imported??
I want to do something a little different in my math class unit on volume - I want to bring up AutoCAD 2014, and have a 3D solid on the screen. As I change/edit the object, I want the students to see the volume amount change, onscreen. Is there a way I can put in a field, preferably, that with a quick regen will show the volume of a 3D object?
View 3 Replies View RelatedTurn on/off layers in the current viewport only, I’m wondering if there is a command that can be plugged on the “quick access toolbar” by which one can turn on/off layers in the current viewport only.
The available command to do so is “Freeze and thaw in current viewport” (attached) and it sounds it can’t be plugged in the “quick access toolbar”!
Is there a way to plug the command “Freeze and thaw in current viewport” in the “quick access toolbar” (attached)?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
in the field names I only see current sheet number...is there a way to set the field to another sheet number besides the current one? 2013 Civil 3D
View 5 Replies View RelatedIn AutoCAD Architecture 2009, we had this awesome button that would basically "lock" the z-axis. This was very handy to move 3D objects around in the same plane.
Now in AutoCAD 2013, the button is no longer there! I found that you can make it a full-time change in the Options/Drafting tab, but we like to switch back and forth with this and that button was really handy.
I've also read that in older versions you could run the "AecProject.arx" file, but we don't have that in our AutoCAD 2013 folder (and I can't find it anywhere else on our hard drives.)
We do have AutoCAD Architecture 2013 but I was trying to only utilize what I needed rather than turn on Architecture every day.
Had a trawl through the options and settings - couldn't find a way to stop this message appearing? Even EXPERT <1> didn't stop it.
View 3 Replies View RelatedI'd like to create a filedialog that points to the IntitialDirectory property location. Not the current project.
It doesn't look like the filedialog object uses the InitialDirectory property at all.
When I set a layer as current, every object or line I select in the drawing appear to be on that layer in the toolbar. Although in the properties toolbox, I see that the line I selected is still on the right layer.
I can't work in paperspace either, when I freeze a layer it freezes all objects. It seems like whenever I give a different layer to an object, it attributes to all object that same layer.
When I open the same drawing in acad 2008, everything is ok, the objects have the proper layers.
Is there a command for that or it's an acad 2013 problem?
I am familiar with the LAYMCUR command to select an object and make that layer current. I am hoping there is a command to select text or a dimension and make that style current. I can't fine such a command. I have to select a text, see what style shows up in the box at top, go to the text style box, find the style and make it current. It seems like unneeded steps. It's simple for layers, why not text and dimensions?
View 3 Replies View RelatedAutocad 2013 Data Extraction works if I do not include attached xrefs and set it to "Select objects in current drawing". When I check "Extract objects from xrefs"; and go to next it processes for a bit then stays on page 2 of 8 on the Define Data Source page. Also have the same error if I choose " Drawings/Sheet set" with or without the xref objects included.
View 3 Replies View RelatedI tried creating a custom workspace and was able to do so (without any modifications) but when I was in that workspace, and loaded an old menu, it wiped out all the default workspaces. where / how these default workspaces are stored, or how to upload all my old menu stuff without going through a tedious cui mod?
View 3 Replies View Relatedhow can i know if the current view/display is align with the current ucs?
let's say i have rotate the ucs about z axis 45 degrees and make it plan now i draw some things and then i change back to world
worlducs = 1
viewdir = 0,0,1
ucsxdir = 1,0,0
ucsydir = 0,1,0
but the display is still in the ucs z 45 (ucsfollow = 0) set the view to PLAN current (now the view is aligned) but the system vars does not change.
For a plan UCS, you would need to compare the VIEWDIR system variable and the cross product of the UCSXDIR and UCSYDIR system varaibles.
[URL]
Is there a macro/script/deisel that will automatically print a pdf (cute pdf autocad lt 2007) to current plot settings in current drawing directory and give it the current drawing view name and number? Disk space not a problem these days and would save time to have a pdf copy of all drawing tabs readily stored in the directory ready for issue.
View 3 Replies View RelatedTechnique that can check the current plotter name for the current tab and assign it to a variable? i.e. can it be assigned to a variable to check if if equals "myplotter1". The next step - is there a technique to change the plotter name to "myplotter2.pc3".
I have partially done the latter part of this in the past using the -plot command line to ASSIGN a new plotter but I would really like to only run the routine if it really needs to.
i have views lets say 3 views on a sheet but in the list of views theres mores that appears maybe i inserted the extra views that are showing but i deleted them to put them on another sheet
the problem is they show up in the list of both sheet and i can't delete them from the list of the sheet that they were before
I am trying to export my document to eps, but it generates an empty file without any error message. My file contains several object arrays. Can this cause a problem during the file format conversion?
View 1 Replies View RelatedI am currently designing a logo for our company in AutoCAD. We use this logo for drawings, shirts, invoices, proposals,....etc. The logo we use was drawing by hand and is very choppy when blown up. This doesn't look good when we send the logo to make shirts and decals. I finished the logo in AutoCAD, which looks very smooth and perfect but when I try to export it in either PNG or JPEG format the logo looks choppy when zoomed in, unlike AutoCAD where it looks smooth no matter how much you zoom into it.
View 1 Replies View RelatedI'm trying to export my drawing in paper layout to PDF but it is not exporting to the correct paper size. The final export is bigger than the regular printing paper. What should I do?
View 6 Replies View RelatedI have a 3D geometry that i wanted to export as a .STL file. But every time i selected the geometry to export, i keep getting the option "Select solids or watertight meshes: Specify opposite corner:." Although the command line does show that the objects have been selected. I've tried different ways of selecting the geometry but every time it shows the same thing.
P.S - i was able to export it in other (.IGES, .IGS formats) but it doesn't seem to be working the same way with .STL
I am trying to figure out how to get autocad2014 and our company's cnc machine to communicate.
The machine uses Solid Ultimate with Screen-to-machine software.
From what ive gathered, I can save my drawing as a R12, R13, R14 version dxf file, which is what is needed for the two programs to talk to each other. The problem is, when i save the dxf file, it saves paper space, not model space. Therefore, all that comes into the cnc program is a titleblock or whatever else I had on the page in paper space.
The cnc program doesnt pick up viewports either.
I need a way to save model space as dxf.