my code is:
Dim AcadDoc As Document = Application.DocumentManager.MdiActiveDocument Dim CurDb As Database = AcadDoc.Database Dim lt As LayerTable = DirectCast(tr.GetObject(CurDb.LayerTableId, OpenMode.ForRead), LayerTable)
if fails on last line with error:-
Operation is not valid due to the current state of the object.
It works sporadically. The error is "There were no plotable sheets in the current operation." I did a window. Also tried saving the dwg to a previous version. I note in options, that a multi sheet file is chosen, but I only have one sheet. Can not seem to change multi sheet to one sheet. If I open the file in Inventor, I get the same error.
View 2 Replies View Relatedhow to obtain the current layer state?
View 5 Replies View RelatedI am having an issue with saving our own dwg file in inventor 2014 & 2014.
When I open a new one of our dwg template files and try to say I get an error that says
"the current operation requires data from document 'xxx' but it cannot be found"
This doesnt happen when trying to save an inventor dwg template file and it has only happened since releases 2013 & 2014. If I open one of our files that was created before release 2013 I can save these with no problem.
I was hoping the issue would resolve itself when upgrading to 2014, but It hasnt, so it must be in a setting that I migrated across.
We have other users using 2013 and are not experiencing the same problem. In fact if they save one of our template files on their machine I am then able to open and save it on my machine!
I want to export a dwg to pdf. It appears to do it, but doesn't. Keep getting
"ERROR: There were no plot table sheets in the current operation."
I'm working in a dynamic block and I think that I've had to mark or unmark some option in the program because since yesterday I can't use as an initial point of any parameter some central points. I mean, when I try to specify the initial point of any parameter (e.g.: rotation) where the four lines converge, the program tells me that the " 2d object is not valid".
View 5 Replies View Relatedwhy we're getting the above message?
We have two floor plans in separate DWG files. We just want to either combine them or copy our key to the other.
I'm trying to create a model of a Golf club head. I need it to be hollow but I am unable to do this using the shell operation or by creating a surface and thickening the faces. I created the geometry by lofting a series of sketches. I think the nature of the geometry may be causing the problem.
View 1 Replies View Relatedi'm trying to make WBLOCK but it is not working, it says: Wblock operation rejected due to a proxy object that does not allow copying.
View 7 Replies View RelatedI have tried to copy a object from 1 drawing to another but it doesnt work it seems to copy but the paste function does not work in the other drawing.
So i tried to wblock the object and i get a error message "write block operation rejected due to a proxy object that does not allow copying"
What is a Proxy object and how can I fix the problem?
i am trying to get the coordinate value for the current station in the subassemblies.
i found
Autodesk.Civil.Roadway.DatabaseServices.BaseBaseline.StationOffsetElevationToXYZ(ByRef Autodesk.AutoCAD.Geometry.Point3d) As Autodesk.AutoCAD.Geometry.Point3d
but how you get the basebaseline?
in the alignment object there is no convert station to coordinate only coordinate to station. which is useless in this case.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
I would like to change current WCS to the object's UCS.
In AutoCAD I manually do this:
a) WCS -> OBject.
b) I'm selecting object;
c) PLAN.
I wrote this
if (sourceObject is Entity) {
Entity ent = (Entity)sourceObject as Entity;
Point3dCollection pts = new Point3dCollection();
ent.GetStretchPoints(pts); Point3d pt = pts[0];
double viewsize = (double)Application.GetSystemVariable("VIEWSIZE");
[Code]....
how to set current coordinate system to the object's UCS?
I just received a large floor plan and loads of the text is upside down. Usually I would use the TORIENT command in Express Tools although this doesn’t seem to work.
The error I get is:1 object was not parallel to the current UCS.No valid objects selected.
I’ve tried flatten, mirror & rotate but I still can’t get the text to display correctly.
I’ve attached a DWG file (2010 format) with a piece of text.
there is a way to show or hide a specific object (not the layer it is sitting in) in a specified viewport without affecting its visibility in model space or other viewports. I came across a .vlx file from www.cadstudio.cz/dl./hideshow.vlx that does the job of showing or hiding an object in model space( and hence in all viewports).
View 5 Replies View RelatedWhen I set a layer as current, every object or line I select in the drawing appear to be on that layer in the toolbar. Although in the properties toolbox, I see that the line I selected is still on the right layer.
I can't work in paperspace either, when I freeze a layer it freezes all objects. It seems like whenever I give a different layer to an object, it attributes to all object that same layer.
When I open the same drawing in acad 2008, everything is ok, the objects have the proper layers.
Is there a command for that or it's an acad 2013 problem?
I am looking for an example excel macro to zoom to an object given the obect entities handle.
View 2 Replies View RelatedJust starting to use 2014, and so far not so good. I tend to keep the Properties Palette open and docked. In 2014, if my current layer is 0, any object I select in a drawing shows as Layer 0 in the Design tab of the Properties palette. If I change to a different layer, any object selected shows that layer in the Properties palette. If I start a new drawing, enter WALLADD and draw a wall segment, the A-WALL layer now correctly appears in the Layer Manager, but when I select the wall, the Layer in Properties is the current layer, not the A-WALL layer it should have gone on. Also, Quick Properties is on, but doesn't pop up anywhere.
View 5 Replies View RelatedI have a button with the following actions:
click:
sym.play(2000)
;mouseover:
var mySymbolObject = sym.getSymbol("Guns_Nav")
;sym.$("Guns_Nav").css({opacity:.3});
mouseout:var mySymbolObject = sym.getSymbol("Guns_Nav")
;sym.$("Guns_Nav").css({opacity:1});
I cant figure out how to add 3rd action on my button, to show an active state (basically freeze the buttonts opacity until the next button is clicked) while this portion of the stage is being visited.
So I figured out how state set works.
Is possible enable/disable a state set everytime I change a scene state?
how can i know if the current view/display is align with the current ucs?
let's say i have rotate the ucs about z axis 45 degrees and make it plan now i draw some things and then i change back to world
worlducs = 1
viewdir = 0,0,1
ucsxdir = 1,0,0
ucsydir = 0,1,0
but the display is still in the ucs z 45 (ucsfollow = 0) set the view to PLAN current (now the view is aligned) but the system vars does not change.
For a plan UCS, you would need to compare the VIEWDIR system variable and the cross product of the UCSXDIR and UCSYDIR system varaibles.
[URL]
Is there a macro/script/deisel that will automatically print a pdf (cute pdf autocad lt 2007) to current plot settings in current drawing directory and give it the current drawing view name and number? Disk space not a problem these days and would save time to have a pdf copy of all drawing tabs readily stored in the directory ready for issue.
View 3 Replies View RelatedTechnique that can check the current plotter name for the current tab and assign it to a variable? i.e. can it be assigned to a variable to check if if equals "myplotter1". The next step - is there a technique to change the plotter name to "myplotter2.pc3".
I have partially done the latter part of this in the past using the -plot command line to ASSIGN a new plotter but I would really like to only run the routine if it really needs to.
Inside my current action, I have this Axis+Image with some keyframes on opacity and transformation, also some keyframes on X blur/Y blur in my Media list. How do I recycle this setup for other Action?
I tried the save selected object, but when I load it from other action, using Add Nodes + Media method, only the Axis and Image show up (with keyframes). The Media of it shows empty.
I have trouble figuring out dash lines. If i change global scale factor or current object scale in a spedific paper space,
the other page will be affected...
I have 1 Next button that is used on the timeline. Each position has a pause then a play so there is only 1 button. I need to get the label info so I know where I am so I can save the location of the timeline that the user was at if they exited before they finished the process.
View 6 Replies View RelatedMaking a part that will have the size as an option to pick. Issue is Ilogic does not like it. I have a list that has sizes like:
3" X 2"
4" X 2"
4" X 4"
But when I put in the code
If Plate_Size = "3" X 2"" ThenParameter("Dim_X") = 3Parameter("Dim_Y") = 2Parameter("Foot_Code") = "A"ElseIf Plate_Size = "4" X 2"" Then Parameter ("Dim_ X") = 4Parameter("Dim_Y") = 2Parameter("Foot_Code") = "B"End If it gives me an error
Error on Line 4 : End of statement expected.and highlight the If Plate_Size ="3" X 2"".I know it has to do with the X but I an't remember what to do having brain fart.
I want to draw operation drawings, I think, ı must do this like that; I must draw one ipt, and later I must draw drawings from this ipt, and idw's
1.drawing (operation); rectangular prism,
2.drawing (operation); rectangular prism and rectangular cutting,
3.drawing (operation); rectangular prism, rectangular cutting and hole,
4.drawing (operation); rectangular prism, rectangular cutting, hole and hexagon cutting,
when I change dimensions of rectangular prism, all four operation drawings must change, so I can't change location of end of part in idw's browser, but I can change location of end of part in ipt's browser, I want to change location of end of part in idw's browser, can I do this? or alternative solution...
I don't want to make, four ipt for each operations... I added a picture...
Autodesk inventor Design Suite Premium 2012
Windows 7 x64, 750 GB harddisk
Intel core i5 Cpu @3.2 GHz, 8 GB Ram,
nVidia Quadro 2000 D Graphics Card
I would like to reversing a Boolean operation if an error happens.
I have two solids that when I try to perform a Subtract Boolean Operation gives me an error. When the error happens I lose both solids. I would like to be able to reverse the subtraction in an event of an error so that I still have both solids.
Dim Solid_1 as Solid3d = CreateSoldFromPl(plinePoints1)
Dim Solid_2 as Solid3d = CreateSoldFromPl(plinePoints1)Try
Solid_1.BooleanOperation(BooleanOperationType.BoolSubtract, Solid_2)
End Try
How to perform LayTrans operation using API.I want to load a DWS file and needs to translate it.
View 1 Replies View RelatedThis drawing appears visible in preview, but all type of AutoCad versions (full, LT from 2006 to 2013) claim it is unvalid.
It may have heavy gradients in it.Would there be any way to recover this file?
[URL]
I am having troubles attaching files to the existing .dwg file. I am trying to attach 6 drawings to one file, but evrytime i do it, it gives me a drawing id not valid error.
View 6 Replies View Related