Inside my current action, I have this Axis+Image with some keyframes on opacity and transformation, also some keyframes on X blur/Y blur in my Media list. How do I recycle this setup for other Action?
I tried the save selected object, but when I load it from other action, using Add Nodes + Media method, only the Axis and Image show up (with keyframes). The Media of it shows empty.
Is there a way to have a light effect only one selected object in action? I'm trying to light some text.
View 2 Replies View Related1) Is there a way to hide all axis icons in Action apart from selected ones? Even though they turn grey it's often very hard to see the selected one in big comps.
2) In HD text module how can I see the full picture? While postioning text I can't see the bottom of the picture on either the preview monitor or the broadcast monitor.
Smoke Adv 2012 Ext1
I was wondering if i could have an object reflect in a surface inside Action? I mean getting the geometry to reflect in a ground plane f. ex.?
View 1 Replies View RelatedIs there a way to save a setup in Action so that I can use it again in another Action composite? What I'm looking for is what ConnectFX Clips do in Smoke2013. I have some 3D models, connected together with Axis and some bkgd elements that I'd like to use over and over again in different Action composites. I'd like to just import those setups (models etc.) into new Action composites. Is this possible?
Smoke 2012 SAP2 SP3
how can i save selected spline/geom of gmask node ? i want just to save couple of spline not the whole gmask setup. is it possible ? for example i have 20 geom in my gmask but i want to save just 3 of them.
View 1 Replies View RelatedJust playing with actions multiple outputs. Have added a matte output successfully but can't find the 'edit output' option to add objects from the schematic to the object list, even if I add all I am then seeing unexpected behaviour using the different blend modes. Is this operator error (it wouldn't be the first time...)?
View 8 Replies View RelatedIs there a way to save and/or open Action setups separate from CFX setups?
Is there a simple way to export objects, axis, or lights to FBX files? Obviously, the FBX camera node can export a camera but it would be useful to export an axis as a locator, at the least.
Is there any way i can see which one is my current keyframe ? in the viewer i got a tracking data (path), but when i scrub the time, i'm lost... i don't know which one is the current keyframe. Normally i can see the big 'cross' icon which represent the position of current track data, but in case where the cross has been shifted out then i have no clue about the current keyframe.
View 3 Replies View Relatedis it possible to see Frames Numbers instead of Timecode Numbers in Timecode field of the Player or Source monitor?
It is easy to do in Effects Editor but I could not figure out how to change display from Timecode to Frame in Player..
When I set a layer as current, every object or line I select in the drawing appear to be on that layer in the toolbar. Although in the properties toolbox, I see that the line I selected is still on the right layer.
I can't work in paperspace either, when I freeze a layer it freezes all objects. It seems like whenever I give a different layer to an object, it attributes to all object that same layer.
When I open the same drawing in acad 2008, everything is ok, the objects have the proper layers.
Is there a command for that or it's an acad 2013 problem?
I created a comp with 30 image planes and an animated camera. Now we want to work with the result in Fusion so I need an FBX. Is there a way to output it directly from action? And how can I export the camera with the animation?
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
I created a 3D text and a 3D path. Now I simply want the text to follow the path (the text should always look at me, so I can read it). But as soon as I connect the path to my axis of my text, the letters are being pushed together. No matter what path settings I try (Look at... etc) the letters don't extend back to their original "position"
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
I have a 10 sec clip that I want to track. It's a girl driving on her bike a long a street. The camera is always parallel to her, so that the scene behind her keeps on changing. How can I track such a shot? I know, that if I want to track something going off screen, I have to jump to the last frame and adjust the tracker, but this clip is just too long, to just place the tracker at the very last frame (almost randomly).
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
Quite often I'll paint up a frame, having forgotten to switch 'current frame' to 'sequence'. Is there any way to copy and apply a current frame's paintups to the sequence after the fact?
smoke 2013 EXT1
iMac i7 3.4Ghz
NVIDIA GeForce GTX 680MX 2048 MB
32GB RAM
MAC OS X 10.8.3
Promise R6
How do I display just the current shot in Color Corrector Page time line, not whole sequence ?
Screen grab shows I am parked on a shot in Colour Warper but timeline shows whole 6 minute sequence rather than the shot I am working on.
I deisgn large numbers symbols in emf format and then batch convert these to svg files. I have over 22,000 images at the moment, so being able to automatically batchnconvert is vital.
Currently I to use CS3 to batch with no problems. In CS4 when you open the emf the artboard is the default document size, not the artwork size. So there is a lot of extra white space in the batched svg.
I have just downloaded a trial of CS5 to see if this is now possible as I hate being stuck on an old version. CS5 has the option to fit the artboard to the selected art (object/artboard/fit to selected art) but you cannot seem to save this to an action list.
The actions I want to include are 'open' 'select all' 'fit to selected art' 'save as svg' 'close' . But the artboad step isn't saved.
Just starting to use 2014, and so far not so good. I tend to keep the Properties Palette open and docked. In 2014, if my current layer is 0, any object I select in a drawing shows as Layer 0 in the Design tab of the Properties palette. If I change to a different layer, any object selected shows that layer in the Properties palette. If I start a new drawing, enter WALLADD and draw a wall segment, the A-WALL layer now correctly appears in the Layer Manager, but when I select the wall, the Layer in Properties is the current layer, not the A-WALL layer it should have gone on. Also, Quick Properties is on, but doesn't pop up anywhere.
View 5 Replies View RelatedThe short cut key to maximize actions outputs was Ctrl + C. What is it now?
View 4 Replies View RelatedHow to get audio playback in CFX and Action?
I have the Main Audio loaded the Timebar but can hear anything when I press play.
I'm needing to sync animations to places in the audio but Smoke 2013 can't seem to do it.
what going on if I use gap effect as back clip and add action node,
How come no result in result (f4) view all is black.
But if I add clip as a back everything goes normal??
GAP effect will work just fine If I not using action node on the schematic in cfx.
I have a camera move in action to move between a couple of still images. This is going into an interlaced programme so I'd like the move to be interlaced (50i). Currently the ouput is rendering progressive frames and I can't see how to change this within cfx/action.
View 5 Replies View RelatedI have a shot with a white background. There is some text that has to disappear somewhere into the white, so I figured, I'm just gonna load in a white color source, lay it on top, and put it in front of the text in z space. But nope, the white doesn't match the background white. It looks grey. I tried to apply a CC, but that doesn't change anything.... I already restarted smoke, but that didn't fix it either.
What else can I do?
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
I have a shot where I added a lensflare to my light. Now, in the picture you see, I separated couple parts of the picture, so some can be affected by the light and some won't.
I always thought I would achieve that by hitting Space+L and drag a line from the light node to the image I want to affect and hold down ALT to connect the light node to the image that I want to exclude. But as you can see in the picture, the glow of the lensfalre is not only on my headlamps of the car, but it's also on the pillar next to it.
I also arranged everything in Z space, so the light would be behind the pillar, but it doesn't work the way I want it to....
Plus, I was wondering, is there a way to do a defocus on the lights, so they look like the ones in the upper left corner?
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
How do you draw a shape in action. I select it from the tool menu, but when I click in the default camera view. It jumps back to the select tool. And the shortcut shift + c doesn't activate the tool either.
View 7 Replies View RelatedI have a project where I have a high res of an astronaut on the moon.
The elements are:
Foreground: Mid shot of Astronaut
Mid: Moon (as in the ground he is standing on behind him)
Background: Space
I've managed to separate out the elements, position them in actions' 3d space and even add a nice little lens flair in the reflection of his helmet as the camera slowly tracks from left to right. The effect (well we've all seen it before) is that it adds 3d depth via parallax scrolling to the photo.
What I can't achieve is a realistic reflection of the moon surface (i.e. the ground in front of him) reflecting in his helmets mirror-like visor.
In order to fake the reflection I essentially want the motion in the reflection of the moons surface to be opposite to that of the mid ground behind him.
My plan was to re-use the mid ground moon surface flipped horizontally and view it through a matte/alpha describing the visors shape and then animate it moving in the opposite direction with a couple of simple keyframes.
How I tried to achieve this was:
Prepare the layered file in photoshop including helmet visors alpha layer (a simple coloured layer with a hole in it)
Bring into action and separate out all the layers in 3d ensuring the helmet matte remains in the same position as the astronaut layer
Animate camera tracking
Come out in to connect fx
Dupe the action node twice and rename the new ones 'helmet alpha' and 'moon reflection'
Go into 'helmet alpha' and delete everything except the camera and the helmet alpha
Go into the 'moon reflection' and delete all except the camera and the moon surface
Go back into cfx and use some compositing node to flip the moon surface (and plug the moon surface action node into that..?)
Then create a new node which allows me to plug the helmet alpha into the alpha channel and the moon surface into the fill channel
Create another new node which allows me to combine the result of this previous node with the original node and layer it on top.
Is it possible to combine two mattes in action?
I load a front back and matte into action. And let's say, I want to add something to that matte, is there a way to do so? Obviously it doesn't work with the keyer, since, as soon as I enter the keyer, my matte is "gone".
My workaround so far, was to create the new matte in action, output it to the edit desk, and then blend them together within a container and then take that back into action....
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
I'm doing an animation with simple camera moves. One of them is a camera moving slightly around an object. I want to make a "look at" or similar, so that the object is always in center no mater where i move the camera. This works untill i connect the camera to a 3D path - then the aim follows the path - not the camera :-|
How can i animate a camera on a path and make the aim stick to a certain location in my scene?An extra question: How can i make an object move at a steady speed on a path no matter how i drew my path (hope this makes sense)?
would like to know how can we get a master keyer in action ?
View 9 Replies View RelatedI've got a window to hammer the machine for a day! In an action schematic I know I can save selected nodes and media. I now want to load those saved nodes into another action but the load tab won't open to give me the options of load all, add nodes, add nodes & media.
View 3 Replies View RelatedWhen you create multiple outputs in Action, where do the files go? I don't see them on the desktop...like smoke 2012.
View 9 Replies View Related