I am trying to export my document to eps, but it generates an empty file without any error message. My file contains several object arrays. Can this cause a problem during the file format conversion?
View 1 RepliesI am currently designing a logo for our company in AutoCAD. We use this logo for drawings, shirts, invoices, proposals,....etc. The logo we use was drawing by hand and is very choppy when blown up. This doesn't look good when we send the logo to make shirts and decals. I finished the logo in AutoCAD, which looks very smooth and perfect but when I try to export it in either PNG or JPEG format the logo looks choppy when zoomed in, unlike AutoCAD where it looks smooth no matter how much you zoom into it.
View 1 Replies View RelatedI'm trying to export my drawing in paper layout to PDF but it is not exporting to the correct paper size. The final export is bigger than the regular printing paper. What should I do?
View 6 Replies View RelatedI have a 3D geometry that i wanted to export as a .STL file. But every time i selected the geometry to export, i keep getting the option "Select solids or watertight meshes: Specify opposite corner:." Although the command line does show that the objects have been selected. I've tried different ways of selecting the geometry but every time it shows the same thing.
P.S - i was able to export it in other (.IGES, .IGS formats) but it doesn't seem to be working the same way with .STL
I am trying to figure out how to get autocad2014 and our company's cnc machine to communicate.
The machine uses Solid Ultimate with Screen-to-machine software.
From what ive gathered, I can save my drawing as a R12, R13, R14 version dxf file, which is what is needed for the two programs to talk to each other. The problem is, when i save the dxf file, it saves paper space, not model space. Therefore, all that comes into the cnc program is a titleblock or whatever else I had on the page in paper space.
The cnc program doesnt pick up viewports either.
I need a way to save model space as dxf.
When exporting from AutoCad to pdf, from paper space, my blocks come out looking strange. I was having the same problem with text but fixed that by converting to Arial. I am exporting to an Arch E size. I have found that when I am zoomed out to show my entire campus, this is when I my problem occurs. When I am zoomed in to show a specific area, export is fine.
Using AutoCad 2014. Files saved back to version 2010.
When you set the lineweight the result is only viewable when you print the drawing, however how is it possible to view the lineweights when I export the drawing to pdf as well.
View 1 Replies View RelatedI have tried to export a DXF model to SAT via the Export option in the File menu. However, I do not see any SAT file generated and there is no message that the export attempt was unsuccessful. How to approach this problem?
View 8 Replies View RelatedI am currenly having an issue when I try to edit a drawing on inventor 13'. pretty much everything I imported from sketchup is a mesh, there are a few elements of solids because I added a few things on autoCAD eng. I would like to know if there is a way to make the meshes into soilds or if there is a work-around.
View 3 Replies View RelatedI am exporting to Adobe and AplhaCam, when ever I send DXF or DWG files, the Circles or arcs are segmented.
How do I make not so segmented?
I still can´t import inventor materials to MaxDesign 2013.
Using STEP or DWG files accomplishes this but due to the fact that i use multi body objects the imported geometry is grouped in an awkward manner (multiple occurences of an object are grouped and i can´t ungroup them).
How to export right?
The issue is quite pressing and my posts in the AREA have not been answered yet. Is it an Inventor or a Max issue?
- 2500K @ 4.2Ghz- 8GB - Radeon7970 -
- Xeon 1230V2 @ stock Ghz- 32GB - Quadro 2000 -
My company has just aquired Autocad2013 after using Autocad2000LT for years. My boss feels that there might be a way to export the text in a drawing as a table.
View 3 Replies View RelatedI am trying to create a pdf file from a dwg file, using DWG True View 2013. I am NOT a CAD user, so all of the terms are new to me. I read that sometimes it's better to convert the DWG to DWF first and then convert it to PDF. So, I tried 'export' to DWF after trying 'export' to PDF. In both cases, after pressing SAVE, I tried to find the new file and couldn't. Basically, I am trying to print out a DWG file (that is in color), so when I print the DWG directly, you can't see the lines very well. That's why I'm trying to convert it to a pdf first.
View 1 Replies View RelatedI am having trouble exporting to a PDF to use in an InDesign document. If exports fine, but it looks AWFUL and doesn't show my annotations or notes clearly at all. it's all blurred.
View 2 Replies View RelatedHow to export points that i have plotted into a text file using autocad 2013? I've tried to look on the internet and it seems you can download plug ins but i don't know if those are safe to use.
View 3 Replies View RelatedEssentially, I've got a bunch of extruded polylines - so, some 3-d shapes - that I'm viewing in a new layout/'viewport' (?), which is set to SW Isometric view in '2D wireframe' viewing style. I've got my lines in different colors, mapped to be all black but different line widths in a custom Plot Style .ctb file.
So, when I change the 'page setup' to "display plot style", everything seems fine. All the lines go black in the viewport, and it seems as though I've configured everything correctly. When I preview an export to .pdf, however - or actually export it - this is lost. The export comes out in color.
I've done exporting using both EXPORTPDF, and PLOT, in both cases making absolutely certain that the .ctb file is being linked correctly (with EXPORTPDF, I've done it both using the 'current' page settings, and also 'override'), and with the PLOT, using the DWG to PDF converter,
I've looked through EXPORTSETTINGS, EXPORT...
On the same computer, with another earlier, simpler file, I have no issues accomplishing what I want.For additional information/to make things more annoying for me, at this stage, the previous file which DID work seemed to conserve layer information, and allowed me to edit individual lines later, if necessary... This colored "I don't care about your plot styles I'm not going B/W" file seems to just be a flat image.
I've compared the two files in two tabs extensively, and can't seem to find ANY other difference, in any of the settings...
Additional info:
PC running Windows 8, Autocad 2014, Adobe Reader XI...
Tried both the DWG to PDF and Adobe PDF plugins to export to PDF...
I've searched this Discussion Groups area on the site and have found a couple solutions. I've tried them all but I can't seem to figure out how to get ALL of my labels to display when I plot or when I export to PDF. It seems that only the POLES layer labels are having trouble showing up...
I understand scaling and it doesn't seem to be the issue. I've tried plotting under different scales, and I still get the same thing.I've attached an image showing the outcome.
On the left is the PRINT PREVIEW in AutoCAD.
On the right is the EXPORTED PDF.
I've checked in the administrator under POLE LABELS, and changed a couple things around but I can't seem to get the pole labels to show up.
In attempting to use either 'export face as' or 'export sketch as' from a solid model in Inventor 2013 the resultant DXF file ALWAYS consists of PolyLines. This prevents other "downstream" software from properly importing the file as a DXF. Thus far the ONLY work-around I have found is to open the DXF in AutoCAD, Explode the polylines, and then re-save as a DXF from AutoCAD.
View 8 Replies View RelatedI wanted to get a few opinions regarding exporting data.
We are working with AutoCAD 2013 Vanilla.
We have dynamic blocks with attributes that contain the block Name, Size, Color, material etc...
What is the best way to export the information?
Schedule and linked to a spreadsheet?
(I have experience with schedules but not so much with linking to spreadsheets)
DbConnect? (I know very little on this)
Another way to ask the question;
What is the best way to export the data that I can successfully train 20 designers on how to do it correctly.
So part one is determining the best method,
part two is training a group of designers to use it correctly.
I worked on getting a schedule out and linking to a spreadsheet but even after talking to my reseller support I feel that is too cumbersome. I would like a more streamlined process, you know the one, click here and presto!
Autodesk Inventor 2013 could export the sketches and dimensions of a part to ProE/CREO. I've tried using an IGES format and exported the part from Inverntor to CREO, and I get the part with the dimensions and everything, but not the sketches or the extrusions,etc. Just the plain part.Also used the .g and .neu , and still nothing.
View 1 Replies View RelatedIt works sporadically. The error is "There were no plotable sheets in the current operation." I did a window. Also tried saving the dwg to a previous version. I note in options, that a multi sheet file is chosen, but I only have one sheet. Can not seem to change multi sheet to one sheet. If I open the file in Inventor, I get the same error.
View 2 Replies View RelatedI need to export points from a plot in ASCII with the following format:
x_initial y_initial z_initial x_final y_final z_final radio type
This is for a substation grounding design.
A and B are the initial and final points of the 1st line.
with the Genio Exporter. I need to export the surface triangles from my job, but the Genio export dialouge box only gives me the option to export suface boundaries.
View 4 Replies View RelatedI recently upgraded to Map 3d 2010 to Mapd 3d 2013 and i cannot figure out how to find the commands to insert images or import/export shp files.
I'm running 2013 in "autocad classic" and did so with 2010 as well. 2010 had a menu bar pull down called "Map" where I could insert an image (Image->Insert). There was also in 2010 a toolbar named "Map" that had import shp, export shp and assign coordinate system.
I can't find any of this in 2013. I can't even find the commands in the customization to create my own toolbar. The commands work (mapiinsert, mapimport, mapexport and ADESETCRDSYS) but i can't find them listed anywhere.
I created 3D text in Photoshop CS6 and exported the mesh as an obj. I was able to import the obj file directly into 3DS Max 2013, but could not import it into Maya 2013 and 2014, because both versions cited incorrect data. Is this a bug or user error? Obvious workaround is to use Max to re-export, but would prefer to have it work directly in Maya.
View 1 Replies View Relatedwhat is the command in AutoCAD 2013 for exporting drawings as DWFx files so that clients who do not have AutoCAD can open or plot a DWFx file using a current version of Internet Explorer or Safari for Apple as an alternative browser.
View 2 Replies View RelatedI'm new to using AutoCAD but learn very quickly. My boss wants me to export our cad file to pdf, but he wants it to have the black background and the colored layers. I have found how to export the color on the layers but not the black background.
View 7 Replies View RelatedI'm working on a plugin that involves exporting a dwg to a wmf.
-Initial thoughts were that this functionality might be exposed through the .NET API and I would just be able to call it directly, passing various information, such as a Selection Set. Correct me if I am wrong, but I can't find anything in the API that provides this functionality.
-Next thought was to call the "WMFOUT" command using the SendStringToExecute() function. This also won't seem to work perfectly as it executes after the .NET command is finished and the user will have to specify a filename and select objects to export. (Preferably those last steps would be automated by the plugin)
I have a model that appears to be too complex for exporting into AGI32 for lighting. I'm pretty sure I have seen several models exported from AutoCAD into AGI and rendered with lighting very successfully.
View 4 Replies View RelatedI have this heavy issue, i can't send to back a line, an object or a hatch under other lines. In 2012 i used this feature a lot but in 2013 it's not working very much, maybe 1 time out of 10 and i absolutely can't say why.
HPDRAWORDER = 1 seems to work with a new hatch.. but i can't redraw everything.
Let's say i put an entire floor plan into block then draw over it. (I don't want to start a Xref discussion please) i can't send the entire bloc to the back.I used to do that with 2012, 2008, 2007.. but it's 2013 it's not working, is there a way to correct that?
The Autocad 2013 x86 or x64 is not installed on Windows 8 Consumer Preview because programs can not read .NET Framework versions 2 and 4 which are integral parts of the OS.
View 5 Replies View Related